749119233

Dimensions: [mm] 7 Recommended Land Pattern: [mm] 6 0,7 ± 0,1 Test conditions Inductance 1 Turns Ratio Saturation Current 15,5 2,5 16,8 max. 6 Properties 2,5 12 Electrical Properties: 1 7,4 max. 7 16,3 max. 1,75 L N1/ 100 kHz/ 100 mV n N1 : N2 : N3 : N4 ISAT N1/ |ΔL/L| < 20 % Value Unit Tol. 210 µH ±10% 12:1:1:3 ±3% 0.6 A typ. DC Resistance 1 RDC 1 N1/ 20 °C 280 mΩ max. DC Resistance 2 RDC 2 N2/ 20 °C 9.5 mΩ max. DC Resistance 3 RDC 3 N3/ 20 °C 9.5 mΩ max. DC Resistance 4 RDC 4 N4/ 20 °C 210 mΩ max. 2.5 µH max. 1500 V (AC) Leakage Inductance LS N1/ 100 kHz/ 100 mV Insulation Test Voltage VT N1,4 => N2,3 12 Certification: Scale - 2:1 Schematic: 13,85 typ. 1 RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] 12 General Information: N1 Pin 1 N2 12,0 typ. 3 5 Operating Temperature 7 10,11 N4 -40 up to +125 °C Storage Conditions (in original packaging) < 40 °C ; < 75 % RH Storage Conditions (for single parts) -20 up to +60 °C Moisture Sensitivity Level (MSL) N3 1 Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently 6 8,9 Scale - 2:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE WJK 004.001 2022-10-21 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-PoE Power over Ethernet Transformer ORDER CODE 749119233 SIZE/TYPE BUSINESS UNIT STATUS PAGE ER14.5/6 eiSos Valid 1/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Typical Inductance vs. Current Characteristics: Properties Value Unit Vin 36 - 57 V (DC) Output Voltage 1 VOut1 3.3 V Output Current 1 IOut1 0.7 A Output Voltage 2 VOut2 3.3 V Output Current 2 IOut2 1.4 A Auxiliary Voltage Vaux 10 V Switching Frequency fswitch 200 - 500 kHz Input Voltage Input: N1 Output 1: N2 Output 2: N3 Auxiliary: N4 Table shows a typical flyback application. Values may vary by application. 250.0 200.0 Inductance [µH] Typical Application: 150.0 100.0 50.0 0.0 0.0 0.5 1.0 Current [A] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE WJK 004.001 2022-10-21 DIN ISO 2768-1m 1.5 2.0 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-PoE Power over Ethernet Transformer ORDER CODE 749119233 SIZE/TYPE BUSINESS UNIT STATUS PAGE ER14.5/6 eiSos Valid 2/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] P0 K0 P2 D0 W3 T E A N top cover tape A0 T1 P1 End D C d A A W B S B0 F W1 close to center W2 T2 Start Feeding direction detail B Carrier Tape Cover Tape Cover Tape B Chip Cavity Sprocket Hole No Component min. 160mm Components No Component min. 100mm Embossment Cover Tape min. 400mm Packaging is referred to the international standard IEC 60286-3:2013 tolerance size A0 B0 W T T1 T2 K0 P0 P1 P2 D0 typ. typ. ±0,3 typ. typ. typ. typ. ±0,1 ±0,1 ±0,1 +0,1/ -0,0 ER14.5/6 15.40 16.60 32.00 0.50 0.05 8.00 7.50 4.00 20.00 2.00 1.50 D0 / 2 +0,05/ -0,0 0.75 d E S F Tape Type 2a +0,05 ±0,1 ±0,1 ±0,1 0.20 1.75 28.40 14.20 Polystyrene VPE / packaging unit pcs. 400 165° - 180° tolerance Tape width 32 mm ± 2,0 330 min. 1.5 min. 12.8 min. 20.2 ± 2,0 80 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE WJK 004.001 2022-10-21 DIN ISO 2768-1m +2 32.4 max. 38.4 min. 31.9 max. 35.4 PROJECTION METHOD DESCRIPTION Pull-off force Tape width 32 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-PoE Power over Ethernet Transformer ORDER CODE 749119233 SIZE/TYPE BUSINESS UNIT STATUS PAGE ER14.5/6 eiSos Valid 3/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Carton: [mm] H IC H C Packaging Specification - Inner Carton: [mm] W IC L Tolerance Value LIC (mm) typ. 55,00 WIC (mm) typ. 340,00 HIC (mm) typ. 340,00 No. of Reel (pcs.) 1 W IC Qty. (pcs.) 400 Material Paper Tolerance Value LC (mm) typ. 465,00 L C WC (mm) typ. 345,00 HC (mm) typ. 345,00 C No. of Inner Carton (pcs.) Qty. (pcs.) Material 8 3200 Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE WJK 004.001 2022-10-21 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-PoE Power over Ethernet Transformer ORDER CODE 749119233 SIZE/TYPE BUSINESS UNIT STATUS PAGE ER14.5/6 eiSos Valid 4/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³