74980100000

Dimensions: [mm] Recommended Hole Pattern: [mm] 15,75 11,43 O3,2 x 2 7 O1,57 x 2 1 2 2,54 8 8,89 1 5,85 7 5,85 2 O0,89 x 8 16,05 ±0,25 3,89 8 8,89 0,35 0,46 7x1,27 = 8,89 Scale - 1,5:1 16,9 ±0,25 1,2 ±0,25 2,0 ±0,25 Unless otherwise defined tolerance: ±0.10mm Recommended Panel Cutout: [mm] 16,5 Metal panel 1,73 16,7 ±0,25 17,2 1,2 x 0,3 PCB Unless otherwise defined tolerance: ±0.10mm Scale - 1:1 Unless otherwise defined tolerance: ±0.25mm Scale - 1,5:1 Product Marking: Marking Marking - Date Code CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JefL 001.001 2020-06-02 DIN ISO 2768-1m PROJECTION METHOD 74980100000 DESCRIPTION YYWW Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-RJ45 LAN Transformer Through Hole Reflow ORDER CODE 74980100000 BUSINESS UNIT STATUS PAGE eiSos Valid 1/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Schematic: Recommended Stencil Design: [mm] PCB thickness = 1,6 mm Stencil thickness = 0,2 mm 11,43 6,8x2,6 (x2) J1 75Ω J4 2,54 2,29 CTD 4 3,56 J5 10,19 Unless otherwise defined tolerance: ±0.10mm TD- 2 RD+ 3 7,95 75Ω 2,2x2,6 (x13) 5,05 1:1 2,6 TD+ 1 1,89 2,16 11,18 J2 1:1 J3 75Ω 75Ω J7 CRD 5 J8 RD- 6 J6 0,001uF/2,5kV 8 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JefL 001.001 2020-06-02 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-RJ45 LAN Transformer Through Hole Reflow ORDER CODE 74980100000 BUSINESS UNIT STATUS PAGE eiSos Valid 2/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Electrical Properties: Certification: Properties Value Unit Tol. cULus Approval E331896 [UL-60950] Inductance L Test conditions 100 kHz/ 100 mV @ 8 mA 350 µH min. UL Approval E331896 [UL-60950] Insulation Test Voltage VT 1 min 2250 V (DC) min. Insertion Loss IL 1-100 MHz -1 dB max. Return Loss RL 1-30 MHz -16 dB min. Plastic Housing Material Return Loss RL 30-60 MHz -14 dB min. Return Loss RL 60-80 MHz -12 dB min. Plastic Housing Flammability Rating Return Loss RL 80-100 MHz -10 dB min. Shielding Material Brass Crosstalk CT 1-60 MHz -33 dB min. Shielding Plating 30µ" Nickel Crosstalk CT 60-100 MHz -30 dB min. Contact Material Phosphor Bronze Contact Plating 30µ" Gold over 50µ" Nickel Common Mode Rejection Ratio CMRR 1-30 MHz -36 dB min. Common Mode Rejection Ratio CMRR 30-60 MHz -33 dB min. Common Mode Rejection Ratio CMRR 60-100 MHz -30 dB Turns Ratio n Data rate 1:1 Material Properties: Thermoplastic LCP Black UL94 V-0 min. ±2% 10/100 Base-T PoE non-PoE General Information: It is recommended that the temperature of the component does not exceed +85°C under worst case conditions Operating Temperature Storage Conditions (in original packaging) -40 up to +85 °C < 40 °C ; < 75 % RH Moisture Sensitivity Level (MSL) 1 Mating Cycle 750 Compliant with IEEE 802.3u Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JefL 001.001 2020-06-02 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-RJ45 LAN Transformer Through Hole Reflow ORDER CODE 74980100000 BUSINESS UNIT STATUS PAGE eiSos Valid 3/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] P0 P2 T E D0 A W3 K0 C W S B0 A F B N D W1 close to center Top Cover Tape P1 D0 2 A T1 d A0 W2 T2 detail B Carrier Tape Feeding direction End Start B Cover Tape Cover Tape Chip Cavity Sprocket Hole Embossment No Component min. 160mm Components No Component min.100mm Cover Tape min. 400mm Packaging is referred to the international standard IEC 60286-3:2019 Tape Type 3 A0 B0 W T (mm) (mm) (mm) (mm) ±0,1 ±0,1 ±0,3 05'±0,3 16,45 17,05 44,00 0,5 T1 T2 K0 P0 P1 P2 D0 (mm) (mm) (mm) (mm) (mm) (mm) (mm) ref. ±0,2 ±0,2 ±0,1 ±0,1 ±0,15 +0,1/ -0,0 0,10 21,9 21,60 4,00 28,00 2,00 1,50 D0 / 2 (mm) +0,05/ -0,0 0,75 D1 d E S F (mm) (mm) (mm) (mm) (mm) Material min. ±0,05 ±0,1 ±0,1 ±0,1 2,00 0,20 1,75 40,40 20,20 Polystyrene Qty. (pcs.) 165° -180° B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) min. 100,00 W1 (mm) + 2,0 44,40 W2 (mm) max. 50,40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JefL 001.001 2020-06-02 DIN ISO 2768-1m W3 (mm) min. 43,90 W3 (mm) max. 47,40 Material Polysytrene PROJECTION METHOD DESCRIPTION Pull-of force Tape width A (mm) ± 2,0 330,00 44 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-RJ45 LAN Transformer Through Hole Reflow ORDER CODE 74980100000 BUSINESS UNIT STATUS PAGE eiSos Valid 4/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max Ts min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) Liquidous Temperature tL Preheat Area TC –5°C Value Preheat Temperature Min 60 - 120 seconds 3 °C/ second max. TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C ≥ 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Applied cycles Volume mm³