Dimensions: [mm]
Recommended Land Pattern: [mm]
Electrical Properties:
Properties
Test conditions
Inductance
3
5
4
2,49
1
2
3
Turns Ratio
8
7
6
5
1,07
11,43 max.
n
N1 : N2 : N3
Value
Unit
Tol.
40
µH
±10%
3:1:1
2
A
typ.
DC Resistance 1
RDC 1 N1/ 20 °C
N1/ |ΔL/L| < 20%
0.08
Ω
max.
DC Resistance 2
RDC 2 N2/ 20 °C
0.05
Ω
max.
DC Resistance 3
RDC 3 N3/ 20 °C
0.05
Ω
max.
1
µH
max.
1500
V (AC)
Leakage Inductance
LS
N1/ 100 kHz/ 100 mV
Insulation Test Voltage
VT
N1 => N2,3
Certification:
13,34 max.
0,3 ±0,1
N1/ 10 kHz/ 100 mV
ISAT
Saturation Current
4
2,08
2
6
13,56
1
7
15,24 max.
8
L
Scale - 1,5:1
RoHS Approval
Compliant [2011/65/EU&2015/863]
REACh Approval
Conform or declared [(EC)1907/2006]
Schematic:
0,6 ±0,1
6
1
10,92
Scale - 1,5:1
Operating Temperature
8
5
N1
4
General Information:
N2
-40 up to +125 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 75 % RH
Storage Conditions (for single
parts)
-20 up to +60 °C
Moisture Sensitivity Level (MSL)
N3
1
Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently
7
Product Marking:
Pin 1
•
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
WJK
003.001
2022-11-10
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WE-FLYLT Flyback Transformer
Wurth Electronics Midcom Inc. Headquarters
121 Airport Drive
57201 Watertown, SD
United States
Phone: +1 (605) 886-4385
www.we-online.com/midcom
midcom@we-online.com
ORDER CODE
750313974
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
EP10
Midcom
Valid
1/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Typical Application:
Properties
Value
Unit
Vin
8 - 32
V (DC)
Switching Frequency
fswitch
200 - 300
kHz
Output Voltage 1
VOut1
5
V
Output Current 1
IOut1
360
mA
Output Voltage 2
VOut2
5
V
Output Current 2
IOut2
360
mA
Input Voltage
Input: N1
Output 1: N2
Output 2: N3
Table shows a typical application. Values may vary by application.
Designed to comply with:
Standard
Condition
IEC61558-2-16
Basic insulation for a primary circuit at a working voltage of 50Vrms.
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
WJK
003.001
2022-11-10
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WE-FLYLT Flyback Transformer
Wurth Electronics Midcom Inc. Headquarters
121 Airport Drive
57201 Watertown, SD
United States
Phone: +1 (605) 886-4385
www.we-online.com/midcom
midcom@we-online.com
ORDER CODE
750313974
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
EP10
Midcom
Valid
2/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape: [mm]
Packaging Specification - Reel: [mm]
P0
D0
K0
P2
T
E
A
W3
A
N
D
B
W
S
B0
F
W1
close to center
C
d
Top Cover
Tape
D1
A
P1
T1
D0
2
A0
T2
Feeding direction
End
Start
Carrier Tape
Cover Tape
detail B
Cover Tape
B
No Component
min. 160mm
Components
No Component
min.100mm
Chip Cavity
Sprocket Hole
Embossment
Cover Tape
min. 400mm
Tape Type
3
A0
B0
W
T
T1
T2
K0
P0
P1
P2
D0
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
typ.
typ.
±0,3
ref.
ref.
typ.
typ.
±0,1
±0,1
±0,1
+0,1/ -0,0
11,80 15,90 32,00 0,50
0,10
12,00 11,70 4,00
20,00 2,00
1,50
D0 / 2
(mm)
+0,05/ -0,0
0,75
D1
d
E
S
F
(mm) (mm) (mm) (mm) (mm) Material
min.
±0,05 ±0,1
±0,1
±0,1
2,00
0,20
1,75
28,40 14,20 Polystyrene
Qty.
(pcs.)
250
165° - 180°
A
(mm)
± 2,0
330,00
B
(mm)
min.
1,50
C
(mm)
min.
12,80
D
(mm)
min.
20,20
N
(mm)
± 2,0
80,00
W1
(mm)
+ 2,0
32,40
W2
(mm)
max.
38,40
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
WJK
003.001
2022-11-10
DIN ISO 2768-1m
W3
(mm)
min.
31,90
W3
(mm)
max.
35,40
Material
Polystyrene
PROJECTION
METHOD
DESCRIPTION
WE-FLYLT Flyback Transformer
Pull-off force
Tape width
32 mm
0,1 N - 1,3 N
Wurth Electronics Midcom Inc. Headquarters
121 Airport Drive
57201 Watertown, SD
United States
Phone: +1 (605) 886-4385
www.we-online.com/midcom
midcom@we-online.com
ORDER CODE
750313974
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
EP10
Midcom
Valid
3/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Carton: [mm]
H
C
H
IC
Packaging Specification - Inner Carton: [mm]
W
L
IC
IC
W
Tolerance
Value
LIC
(mm)
typ.
361,90
WIC
(mm)
typ.
339,70
HIC
(mm)
typ.
60,33
No. of
Reel (pcs.)
1
Qty.
(pcs.)
250
Material
Paper
Tolerance
Value
LC
(mm)
typ.
365,12
WC
(mm)
typ.
342,90
L
C
HC
(mm)
typ.
253,00
C
No. of
Inner Carton (pcs.)
Qty.
(pcs.)
Material
4
1000
Paper
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
WJK
003.001
2022-11-10
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WE-FLYLT Flyback Transformer
Wurth Electronics Midcom Inc. Headquarters
121 Airport Drive
57201 Watertown, SD
United States
Phone: +1 (605) 886-4385
www.we-online.com/midcom
midcom@we-online.com
ORDER CODE
750313974
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
EP10
Midcom
Valid
4/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
tL
Preheat Area
Ts min
TC –5°C
Value
Preheat Temperature Min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
60 - 120 seconds
3 °C/ second max.
Liquidous Temperature
TL
217 °C
Time tL maintained above TL
tL
60 - 150 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
20 - 30 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
8 minutes max.
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Volume mm³
