750315839

Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties 3 4 6 5 1 2 3 4 5 Turns Ratio 10 9 13,46 max. 8 7 12,7 max. N1/ 10 kHz/ 100 mV n N1 : N2+N3 RDC 1 N1/ 20 °C DC Resistance 2 RDC 2 N2+N3/ 20 °C Unit Tol. 40 µH ±10% 1:10 N1/ |ΔL/L| < 20% DC Resistance 1 Value Leakage Inductance LS N1/ 100 kHz/ 100 mV Insulation Test Voltage VT N1 => N2,3 3.2 A typ. 0.085 Ω ±10% 8.4 Ω ±10% 0.5 µH max. 1500 V (AC) Certification: 6 2,5 0,4 ±0,1 L ISAT Saturation Current 16,36 2 7 17,75 max. 1 8 1,88 1,17 10 9 Test conditions Inductance RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Scale - 2:1 Schematic: 0,7 ±0,1 7 3 N2 8 13,46 N1 General Information: 5 Scale - 1,5:1 N3 Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging) < 40 °C ; < 75 % RH Storage Conditions (for single parts) -20 up to +60 °C Moisture Sensitivity Level (MSL) 1 Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently 9 Product Marking: Pin 1 Marking • Term. 1 dot & WE logo 750315839 Lot and date code CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE WJK 003.001 2022-11-10 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-FLYLT Flyback Transformer Wurth Electronics Midcom Inc. Headquarters 121 Airport Drive 57201 Watertown, SD United States Phone: +1 (605) 886-4385 www.we-online.com/midcom midcom@we-online.com ORDER CODE 750315839 SIZE/TYPE BUSINESS UNIT STATUS PAGE EP13 Midcom Valid 1/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Typical Application: Properties Value Unit Vin 4 - 36 V (DC) Switching Frequency fswitch 50 - 200 kHz Output Voltage 1 VOut1 200 V Output Current 1 IOut1 12 mA Input Voltage Input: N1 Output 1: N2+N3 Table shows a typical application. Values may vary by application. Designed to comply with: Standard IEC60950-1, EN60950-1, UL60950-1/CSA60950-1 and AS/NZS60950.1 Condition Functional insulation for a primary circuit at a working voltage of 265Vrms, 400Vpeak, Overvoltage Category II. CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE WJK 003.001 2022-11-10 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-FLYLT Flyback Transformer Wurth Electronics Midcom Inc. Headquarters 121 Airport Drive 57201 Watertown, SD United States Phone: +1 (605) 886-4385 www.we-online.com/midcom midcom@we-online.com ORDER CODE 750315839 SIZE/TYPE BUSINESS UNIT STATUS PAGE EP13 Midcom Valid 2/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] P0 A K0 T E D0 W3 A N D B W S B0 F W1 close to center d C Top Cover Tape A D1 D0 2 P1 T1 A0 T2 Feeding direction End No Component min.160mm Start Components detail B Carrier Tape Cover Tape Cover Tape B No Component min.100mm Chip Cavity Sprocket Hole Embossment Cover Tape min. 400mm Tape Type 3 A0 B0 W T T1 T2 K0 P0 P1 P2 D0 (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) typ. typ. ±0,3 ref. ref. typ. typ. ±0,1 ±0,1 ±0,1 +0,1/ -0,0 13,20 18,00 32,00 0,50 0,10 13,25 13,00 4,00 24,00 2,00 1,50 D0 / 2 (mm) +0,05/ -0,0 0,75 D1 d E S F (mm) (mm) (mm) (mm) (mm) Material min. ±0,05 ±0,1 ±0,1 ±0,1 2,00 0,20 1,75 28,40 14,20 Polystyrene Qty. (pcs.) 200 165° - 180° A (mm) ± 2,0 330,00 B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) ± 2,0 80,00 W1 (mm) + 2,0 32,40 W2 (mm) max. 38,40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE WJK 003.001 2022-11-10 DIN ISO 2768-1m W3 (mm) min. 31,90 W3 (mm) max. 35,40 Material Polystyrene PROJECTION METHOD DESCRIPTION WE-FLYLT Flyback Transformer Pull-off force Tape width 32 mm 0,1 N - 1,3 N Wurth Electronics Midcom Inc. Headquarters 121 Airport Drive 57201 Watertown, SD United States Phone: +1 (605) 886-4385 www.we-online.com/midcom midcom@we-online.com ORDER CODE 750315839 SIZE/TYPE BUSINESS UNIT STATUS PAGE EP13 Midcom Valid 3/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Carton: [mm] H C H IC Packaging Specification - Inner Carton: [mm] W L IC IC W Tolerance Value LIC (mm) typ. 361,90 WIC (mm) typ. 339,70 HIC (mm) typ. 60,33 No. of Reel (pcs.) 1 Qty. (pcs.) 200 Material Paper Tolerance Value LC (mm) typ. 365,12 WC (mm) typ. 342,90 L C HC (mm) typ. 253,00 C No. of Inner Carton (pcs.) Qty. (pcs.) Material 4 800 Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE WJK 003.001 2022-11-10 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-FLYLT Flyback Transformer Wurth Electronics Midcom Inc. Headquarters 121 Airport Drive 57201 Watertown, SD United States Phone: +1 (605) 886-4385 www.we-online.com/midcom midcom@we-online.com ORDER CODE 750315839 SIZE/TYPE BUSINESS UNIT STATUS PAGE EP13 Midcom Valid 4/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³