750316886

Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Inductance Turns Ratio L N1+N2/ 10 kHz/ 10 mV n N1+N2 : N3+N4 Value Unit Tol. 200 µH min. 1:1.17 DC Resistance 1 RDC 1 N1+N2/ 20 °C 0.14 Ω ±20% DC Resistance 2 RDC 2 N3+N4/ 20 °C 0.175 Ω ±20% Voltage-Time ∫Udt N1/ bipolar waveform 15 Vµs Interwinding Capacitance CWW N1,2 => N3,4/ 100 kHz/ 100 mV 9 pF typ. typ. Leakage Inductance LS N1+N2/ 100 kHz/ 100 mV 220 nH Insulation Test Voltage VT N1,2 => N3,4 2500 V (AC) Certification: Schematic: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] Component Qualification 1 6 N1 5 N2 3 General Information: Operating Temperature N3 2 AEC-Q200 Grade 1 N4 4 -40 up to +125 °C Storage Conditions (in original packaging) < 40 °C ; < 75 % RH Storage Conditions (for single parts) -20 up to +60 °C Moisture Sensitivity Level (MSL) 1 Electrical Specifications @ 25°C unless otherwise noted Product Marking: Pin 1 Marking • 750316886 Lot and date code CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE IKK 004.001 2023-02-22 ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-PPTI Push-Pull Transformer Wurth Electronics Midcom Inc. Headquarters 121 Airport Drive 57201 Watertown, SD United States Phone: +1 (605) 886-4385 www.we-online.com/midcom midcom@we-online.com ORDER CODE 750316886 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1408 Midcom Valid 1/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Typical Application: Typical Temperature Rise vs. Current Characteristics: Properties Value Unit Vin 5 V (DC) Output Voltage 1 VOut1 5 V Output Current 1 IOut1 950 mA Switching Frequency fswitch 200 - 400 kHz Input Voltage 100 90 Input: N1 / N2 Output 1: N3 / N4 Table shows a typical application. Values may vary by application. 80 Designed to Comply With: 70 Condition Supplementary insulation for a primary circuit at a working voltage of 600Vrms, 800Vpeak, Overvoltage Category II, Pollution Degree II, Material Group 1, altitude up to 2000 meters. Supplementary insulation for a mains circuit of Overvoltage Category II up to 600Vrms Line-to-Neutral, Pollution Degree II, Material Group 1, altitude up to 2000 meters. IEC61010-1 Supplementary insulation for a secondary circuit derived from mains circuit of Overvoltage Category II up to 600Vrms Line-to-Neutral, Pollution Degree II, Material Group 1, at a working voltage of 600Vrms, 800Vpeak, altitude up to 2000 meters. Temperature Rise [K] Standard IEC60950-1, EN60950-1, UL60950-1/CSA60950-1 and AS/NZS60950.1 60 50 40 30 20 10 0 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Push-Pull Output Current [A] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE IKK 004.001 2023-02-22 ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-PPTI Push-Pull Transformer Wurth Electronics Midcom Inc. Headquarters 121 Airport Drive 57201 Watertown, SD United States Phone: +1 (605) 886-4385 www.we-online.com/midcom midcom@we-online.com ORDER CODE 750316886 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1408 Midcom Valid 2/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] W3 A B N D W1 close to center C W2 detail B Cover Tape B Chip Cavity Sprocket Hole Embossment Tape Type Tolerance Value A0 (mm) B0 (mm) 8.7 14.6 W (mm) ±0.3 24 T (mm) ±0.05 0.5 T1 (mm) ±0.0025 0.051 T2 (mm) K0 (mm) 5.311 4.75 P0 (mm) ±0.10 4 P1 (mm) ±0.10 16 P2 (mm) ±0.10 2 D0 (mm) ±0.05 1.55 D0 / 2 (mm) 0.775 D1 (mm) +0.25 1.5 E (mm) ±0.10 1.75 F (mm) Material Qty. (pcs.) 11.5 Black Conductive PS 850 165° - 180° A (mm) ± 2,0 330,00 B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) ref. 101,60 W1 (mm) + 2,0 24,40 W2 (mm) max. 30,40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE IKK 004.001 2023-02-22 ISO 2768-1m W3 (mm) min. 23,90 W3 (mm) max. 27,40 Material Polystyrene PROJECTION METHOD DESCRIPTION WE-PPTI Push-Pull Transformer Pull-off force Tape width 24 mm 0,1 N - 1,3 N Wurth Electronics Midcom Inc. Headquarters 121 Airport Drive 57201 Watertown, SD United States Phone: +1 (605) 886-4385 www.we-online.com/midcom midcom@we-online.com ORDER CODE 750316886 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1408 Midcom Valid 3/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Carton: [mm] H C H IC Packaging Specification - Inner Carton: [mm] L IC W IC L Tolerance Value LIC (mm) typ. 339,00 WIC (mm) typ. 362,00 HIC (mm) typ. 54,00 Qty. (pcs.) 850 Material Tolerance Value Paper LC (mm) typ. 365,12 C WC (mm) typ. 342,90 W HC (mm) typ. 215,90 C No. of Inner Carton (pcs.) Qty. (pcs.) Material 4 3400 Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE IKK 004.001 2023-02-22 ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-PPTI Push-Pull Transformer Wurth Electronics Midcom Inc. Headquarters 121 Airport Drive 57201 Watertown, SD United States Phone: +1 (605) 886-4385 www.we-online.com/midcom midcom@we-online.com ORDER CODE 750316886 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1408 Midcom Valid 4/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³