750319496

Dimensions: [mm] 8 Recommended Land Pattern: [mm] Properties 5 Test conditions Inductance 1,17 2,5 1 8 5 11,94 max. 0,5 0,5 8 1 N1 : N2 : N3 ±10% A typ. 42 mΩ ±15% DC Resistance 2 RDC 2 N2/ 20 °C 370 mΩ ±10% DC Resistance 3 RDC 3 N3/ 20 °C 115 mΩ ±10% 500 nH max. 7.3 pF typ. 4000 V (AC) LS N1/ |ΔL/L| < 20% N1/ 100 kHz/ 100 mV CWW N1 => N2,3/ 100 kHz/ 10 mV VT N1 => N2,3 Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] AEC-Q200 Grade 1 UL Insulation System N2 Tol. µH 1.8:3.6:1 Component Qualification 2 Unit 7 4.5 Insulation Test Voltage Schematic: n Value RDC 1 N1/ 20 °C Interwinding Capacitance Scale - 2:1 N1/ 10 kHz/ 100 mV DC Resistance 1 Leakage Inductance 11,3 max. L ISAT Saturation Current 8,89 4 Turns Ratio 4 2,39 1 Electrical Properties: Class B 130°C system [E106391, M1-130(B)] General Information: 6 7 10,95 max. N1 4 3 N3 5 Operating Temperature -40 up to +130 °C Storage Conditions (in original packaging) < 40 °C ; < 75 % RH Storage Conditions (for single parts) -20 up to +60 °C Moisture Sensitivity Level (MSL) Scale - 2:1 1 Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently Product Marking: Pin 1 Marking • 319496 M1-130(B) Lot and date code CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE WJK 001.000 2022-07-15 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-AGDT Auxiliary Gate Drive Transformer ORDER CODE 750319496 SIZE/TYPE BUSINESS UNIT STATUS PAGE EP7 eiSos Valid 1/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Typical Application: Properties Value Unit Vin 9 - 18 V Switching Frequency fswitch 350 kHz Output Voltage 1 VOut1 20 V Output Current 1 IOut1 0.24 A Output Voltage 2 VOut2 5 V Output Current 2 IOut2 0.24 A Input Voltage Input: N1 Output 1: N2 Output 2: N3 Table shows a typical flyback application. Values may vary by application. Designed to Comply With: Standard Condition IEC62368-1, EN62368-1, UL62368-1/CSA62368-1 and AS/NZS62368.1 Basic insulation for a working voltage of 567Vrms, 800Vpeak, Overvoltage Category II, Pollution Degree 2. IEC61558-2-16 and EN61558-2-16 Basic insulation for a working voltage of 567Vrms, 800Vpeak, Overvoltage Category II, Pollution Degree 2. CB report for IEC61558-2-16/EN61558-2-16 required per Annex G.5.3 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE WJK 001.000 2022-07-15 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-AGDT Auxiliary Gate Drive Transformer ORDER CODE 750319496 SIZE/TYPE BUSINESS UNIT STATUS PAGE EP7 eiSos Valid 2/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] Packaging Specification - Reel: [mm] P0 K0 D0 A P2 T W3 N A W B E2 B0 D F W1 close to center C Top Cover Tape D1 A P1 T1 A0 T2 W2 detail B End Start Feeding direction Carrier Tape Cover Tape Cover Tape B Chip Cavity Sprocket Hole No Component min. 160mm Components No Component min.100mm Embossment Cover Tape min. 400mm Packaging is referred to the international standard IEC 60286-3:2013 Tape Type 2a A0 (mm) typ. 11,40 B0 (mm) typ. 11,20 W (mm) +0,3/ -0,1 24,00 T (mm) ref. 0,50 T1 (mm) ref. 0,10 T2 (mm) typ. 12,80 K0 (mm) typ. 12,2 P0 (mm) ±0,1 4,00 P1 (mm) ±0,1 20,00 P2 (mm) ±0,1 2,00 D0 (mm) +0,1/ -0,0 1,50 D1 (mm) min. 1,50 E1 (mm) ±0,1 1,75 E2 (mm) min. 22,25 F (mm) ±0,1 11,50 Material Qty. (pcs.) Polystyrene 250 165° - 180° B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) min. 60,00 W1 (mm) + 2,0 24,40 W2 (mm) max. 30,40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE WJK 001.000 2022-07-15 DIN ISO 2768-1m W3 (mm) min. 23,90 W3 (mm) max. 27,40 Material Polystyrene PROJECTION METHOD DESCRIPTION Pull-of force Tape width A (mm) ± 2,0 330,00 24 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-AGDT Auxiliary Gate Drive Transformer ORDER CODE 750319496 SIZE/TYPE BUSINESS UNIT STATUS PAGE EP7 eiSos Valid 3/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Bag: [mm] Packaging Specification - Carton: [mm] Top Cover vacuum bag H C Cardboard W Tolerance Value LC (mm) typ. 370,00 L C WC (mm) typ. 280,00 HC (mm) typ. 350,00 C No. of Reel (pcs.) Qty. (pcs.) Material 5 1250 Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE WJK 001.000 2022-07-15 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-AGDT Auxiliary Gate Drive Transformer ORDER CODE 750319496 SIZE/TYPE BUSINESS UNIT STATUS PAGE EP7 eiSos Valid 4/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³