760301301

Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties 7 6 5 10,5 max. 8 2 3 Turns Ratio 4 8,13 1 8 7 6 1,17 2,5 5 10,5 max. 11,0 max. Scale - 2:1 Unit Tol. N1/ 100 kHz/ 100 mV 750 µH min. n N1 : N2 : N3 1:1:1 DC Resistance 1 1100 mΩ max. DC Resistance 2 RDC 2 N2/ 20 °C 1300 mΩ max. DC Resistance 3 RDC 3 N3/ 20 °C 1300 mΩ max. LS 4 µH max. Voltage-Time ∫Udt B = 280 mT N1/ 100 kHz/ 100 mV 102 µVs typ. Interwinding Capacitance CWW N1 => N2,3/ 100 kHz/ 100 mV 11 pF typ. Rated Voltage VR 80 V (AC) Insulation Test Voltage VT N1 => N2,3 2500 V (AC) Insulation Test Voltage VT 2 N2 => N3 1500 V (DC) Certification: Schematic: 5 N2 2 Value L RDC 1 N1/ 20 °C Leakage Inductance 3 4 0,7 ref. 2,5 ± 0,3 1,91 1 2 Test conditions Inductance RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] General Information: 6 7 N1 3 N3 8 Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging) < 40 °C ; < 75 % RH Storage Conditions (for single parts) -20 °C up to + 60 °C; up to RH Moisture Sensitivity Level (MSL) Scale - 2:1 1 Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE WJK 001.002 2022-09-14 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-GDTI Gate-Drive-Transformer Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 760301301 SIZE/TYPE BUSINESS UNIT STATUS PAGE EP7 eiSos Valid 1/5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Designed to Comply With: Standard Condition IEC61558-2-16 and EN61558-2-16 Basic insulation for a working voltage of 250Vrms, Overvoltage Category II, Pollution Degree 2. CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE WJK 001.002 2022-09-14 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-GDTI Gate-Drive-Transformer Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 760301301 SIZE/TYPE BUSINESS UNIT STATUS PAGE EP7 eiSos Valid 2/5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³