7608957210

Dimensions: [mm] 7 Recommended Land Pattern: [mm] Properties 13 Test conditions 4,5 0,5 4,0 6 1 O 3,07 8,5 max. 25,8 max. Scale - 1:1 1 -A- h 0,1 N1 2 Turns Ratio n N1+N2+N3+N4+N5 : N6 : N7 5:1:1 DC Resistance 1 RDC 1 N1+N2+N3+N4+N5/ 20 °C 12.5 mΩ max. DC Resistance 2 RDC 2 N6/ 20 °C 0.85 mΩ max. DC Resistance 3 RDC 3 N7/ 20 °C 0.85 mΩ max. N1+N2+N3+N4+N5/ 500 kHz/ 100 mV 60 nH max. CWW N1,2,3,4,5 => N6,7/ 100 kHz/ 100 mV 1.3 nF max. 1000 V Insulation Test Voltage LS VT N1,2,3,4,5 => N6,7 3 8,10,12 N3 N7 N4 Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] General Information: N6 4 RoHS Approval 11,13 N2 30,4 max. ±15% Certification: Schematic: 2,20 µH 28 Interwinding Capacitance 21,0 Tol. N1+N2+N3+N4+N5/ 100 kHz/ 100 mV Leakage Inductance 13 Unit L 7 3,5 Value Inductance 1 24,9 6 Electrical Properties: Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging) < 40 °C ; < 75 % RH Storage Conditions (for single parts) -20 up to +60 °C 7,9 5 Moisture Sensitivity Level (MSL) N5 Scale - 1:1 1 Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently 6 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE WJK 002.000 2023-01-13 ISO 2768-1m PROJECTION METHOD DESCRIPTION LLC Transformer Wurth Electronics Midcom Inc. Headquarters 121 Airport Drive 57201 Watertown, SD United States Phone: +1 (605) 886-4385 www.we-online.com/midcom midcom@we-online.com ORDER CODE 7608957210 SIZE/TYPE BUSINESS UNIT STATUS PAGE EEW25 Midcom Valid 1/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Typical Application: Properties Value Unit Vin 54 V (DC) Switching Frequency fswitch 350 kHz Output Voltage 1 VOut1 11 V Output Current 1 IOut1 40 A Input Voltage Input: N1+N2+N3+N4+N5 Output 1: N6+N7 Table shows a typical application. Values may vary by application. CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE WJK 002.000 2023-01-13 ISO 2768-1m PROJECTION METHOD DESCRIPTION LLC Transformer Wurth Electronics Midcom Inc. Headquarters 121 Airport Drive 57201 Watertown, SD United States Phone: +1 (605) 886-4385 www.we-online.com/midcom midcom@we-online.com ORDER CODE 7608957210 SIZE/TYPE BUSINESS UNIT STATUS PAGE EEW25 Midcom Valid 2/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. P0 K0 P2 T W3 W1 close to center C Top Cover Tape d D1 A P1 T1 D0 2 A0 W2 T2 Feeding direction End N A W S B0 B D F D2 E A Start Carrier Tape Cover Tape detail B B Cover Tape Chip Cavity Sprocket Hole No Component min.160mm Components No Component min.100mm Embossment Cover Tape min. 400mm Tape Type Tolerance Value 3 A0 (mm) typ. 25,60 B0 (mm) typ. 31,20 W (mm) ±0,3 56,00 T (mm) ref. 0,50 T1 (mm) ref. 0,10 T2 (mm) typ. 10,60 K0 (mm) typ. 10,00 P0 (mm) ±0,1 4,00 P1 (mm) ±0,1 36,00 P2 (mm) ±0,15 2,00 D0 (mm) +0,1/ -0,0 1,50 D0 / 2 (mm) +0,05/ -0,0 0,75 D1 (mm) min. 2,00 d (mm) ±0,05 0,20 E (mm) ±0,1 1,75 S (mm) ±0,1 52,40 F (mm) Material ±0,1 26,20 Polystyrene Qty. (pcs.) 165° -180° A (mm) ± 2,0 330 Tolerance Value B (mm) min. 1.5 C (mm) min. 12.8 D (mm) min. 20.2 N (mm) min. 100 W1 (mm) + 2,0 56.4 W2 (mm) max. 62.4 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE WJK 002.000 2023-01-13 ISO 2768-1m W3 (mm) min. 55.9 W3 (mm) max. 59.4 Material Polystyrene PROJECTION METHOD DESCRIPTION LLC Transformer Pull-off force Tape width 56 mm 0,1 N - 1,3 N Wurth Electronics Midcom Inc. Headquarters 121 Airport Drive 57201 Watertown, SD United States Phone: +1 (605) 886-4385 www.we-online.com/midcom midcom@we-online.com ORDER CODE 7608957210 SIZE/TYPE BUSINESS UNIT STATUS PAGE EEW25 Midcom Valid 3/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts 60 - 120 seconds Ramp-up Rate (TL to TP) 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³