78433490036

Dimensions: [mm] Recommended Land Pattern: [mm] Electrical & Optical Properties: Properties 2,45 4,55 2,45 Inductance 2,4 5,0 ±0,3 2,3 ±0,2 Rated Current 1,5 ref. Test conditions Value Unit Tol. L 100 kHz/ 10 mA 0.36 µH ±20% IR ΔT = 50 K 19 A max. typ. Saturation Current ISAT 48.5 A DC Resistance RDC @ 20 °C 2.3 mΩ typ. DC Resistance RDC @ 20 °C 2.8 mΩ max. Self Resonant Frequency fres 218 MHz typ. |ΔL/L| < 10 % Certification: 8,1 ±0,3 Solder Resist 9,0 ±0,3 no vias and traces in restricted area Scale- 2.5:1 RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Component Qualification AEC-Q200 Grade 0 Automotive Approval Yes Schematic: General Information: 8,1 ±0,3 It is recommended that the temperature of the component does not exceed +150°C under worst case conditions Ambient Temperature (referring to IR) -55 up to +100 °C Operating Temperature -55 up to +150 °C Storage Conditions (in original packaging) < 40 °C ; < 75 % RH Moisture Sensitivity Level (MSL) 1 Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently Scale- 2.5:1 Product Marking: Marking R36 (Inductance Code) CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE CF 001.001 2022-02-01 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-CHSA Performance SMD High Current Inductor ORDER CODE 78433490036 SIZE/TYPE BUSINESS UNIT STATUS PAGE 8090 eiSos Valid 1/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Typical Inductance vs. Current Characteristics: Typical Temperature Rise vs. Current Characteristics: 100 0.4 90 0.35 80 0.3 Temperature Rise [K] Inductance [µH] 70 0.25 0.2 0.15 60 50 40 30 0.1 20 0.05 10 0 0 0 10 20 30 40 50 0 5 10 Current [A] 15 20 25 Current [A] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE CF 001.001 2022-02-01 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-CHSA Performance SMD High Current Inductor ORDER CODE 78433490036 SIZE/TYPE BUSINESS UNIT STATUS PAGE 8090 eiSos Valid 2/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Typical Impedance Characteristics: 1000 Impedance [Ω] 100 10 1 0.1 0.01 0.01 0.1 1 10 Frequency [MHz] Z 100 1000 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE CF 001.001 2022-02-01 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-CHSA Performance SMD High Current Inductor ORDER CODE 78433490036 SIZE/TYPE BUSINESS UNIT STATUS PAGE 8090 eiSos Valid 3/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] P0 P2 T E1 D0 W3 C top cover tape D1 A0 K0 P1 N A W B E2 B0 D F W1 close to center W2 T1 T2 detail B End Start Feeding direction Carrier tape Cover tape Cover Tape B Chip Cavity Sprocket Hole No Component min. 160mm Components No Component min. 100mm Cover Tape min. 400mm Packaging is referred to the international standard IEC 60286 -3:2013 tolerance size A0 B0 W T T1 T2 K0 P0 P1 P2 D0 typ. typ. ±0,3 typ. typ. typ. typ. ±0,1 ±0,1 ±0,1 +0,1 8090 8,55 8,55 24,00 0,50 0,05 9,85 9,30 4,00 16,00 2,00 1,50 Embossment -0,0 D1 E1 E2 F Tape Type 2a typ. ±0,1 min. ±0,1 1,50 1,75 22,25 11,50 Polystyrene VPE / packaging unit pcs. 350 165° - 180° 24mm A ±2,0 330,00 B ±0,5 2,00 C ±0,5 13,00 D ±0,5 21,00 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE CF 001.001 2022-02-01 DIN ISO 2768-1m N ±0,5 100,00 W1 +0,4 24,40 W2/W3 ±0,5 29,40 PROJECTION METHOD DESCRIPTION Pull-of force Tape width tolerance tape width 24 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-CHSA Performance SMD High Current Inductor ORDER CODE 78433490036 SIZE/TYPE BUSINESS UNIT STATUS PAGE 8090 eiSos Valid 4/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³