78436432033

Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: 10,65 ±0,5 Properties 4,5 ±0,2 Rated Current 3 2 14,15 10,25 4,95 8,5 15,9 1 1 6,6 ±0,2 5,95 Pin 3 is only used for stability 2 6,0 10,65 0,8 ref. Scale - 1:1 17,0 max. Value Unit Tol. L 100 kHz/ 5 mA 3.3 µH ±15% IR ΔT = 50 K 38 A typ. Saturation Current ISAT 50 A DC Resistance RDC @ 20 °C 1.1 mΩ ±10% Self Resonant Frequency fres 34 MHz typ. |ΔL/L| < 10 % Certification: 27,50 max. 0,70 +0.3 -0.5 Test conditions Inductance 8,1 RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] Component Qualification AEC-Q200 Grade 1 Automotive Approval Released Schematic: 4,45 3,45 1,25 General Information: 19,0 2 27,5 max. 1 Ambient Temperature (referring to IR) -40 up to +100 °C Operating Temperature -40 up to +150 °C Storage Conditions (in original packaging) < 40 °C ; < 75 % RH Moisture Sensitivity Level (MSL) 1 Scale - 1:1 Marking 78436432033 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PaC 002.001 2020-03-24 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-HCFA High Current Flat Wire Inductor ORDER CODE 78436432033 SIZE/TYPE BUSINESS UNIT STATUS PAGE 2818 eiSos Valid 1/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Typical Inductance vs. Current Characteristics: Typical Temperature Rise vs. Current Characteristics: 3,5 100 90 3,0 80 70 Temperature Rise [K] Inductance [µH] 2,5 2,0 1,5 1,0 60 50 40 30 20 0,5 10 0 0,0 0 10 20 30 Current [A] 40 50 60 0 10 20 30 Current [A] 40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PaC 002.001 2020-03-24 DIN ISO 2768-1m 50 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-HCFA High Current Flat Wire Inductor ORDER CODE 78436432033 SIZE/TYPE BUSINESS UNIT STATUS PAGE 2818 eiSos Valid 2/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Typical Impedance Characteristics: 10000 Impedance [Ω] 1000 100 10 1 0,1 0,01 0,1 1 Frequency [MHz] 10 100 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PaC 002.001 2020-03-24 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-HCFA High Current Flat Wire Inductor ORDER CODE 78436432033 SIZE/TYPE BUSINESS UNIT STATUS PAGE 2818 eiSos Valid 3/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tray and Carton: [mm] A H C W W2 C W W1 Cover L W C C C L2 A C L H H L1 L L (mm) typ. 362,00 L1 (mm) typ. 262,50 L2 (mm) typ. 37,50 CL (mm) typ. 28,30 W (mm) typ. 257,00 W1 (mm) typ. 178,40 W2 (mm) typ. 35,00 CW (mm) typ. 28,80 H (mm) typ. 28,00 CH (mm) typ. 27,30 Qty. (pcs.) Material 48 PS LC (mm) WC (mm) HC (mm) typ. 365 typ. 275 typ. 100 No. of Tray pcs. 4 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PaC 002.001 2020-03-24 DIN ISO 2768-1m Qty. pcs pcs. 48 Material Paper PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-HCFA High Current Flat Wire Inductor ORDER CODE 78436432033 SIZE/TYPE BUSINESS UNIT STATUS PAGE 2818 eiSos Valid 4/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³