78931812515

Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions 2 5 1 6 Turns Ratio 11,24 1 6 2 5 1,09 4 2,54 3 8,3 max. Inductance 1) 4 4,1 max. 3 1,83 0,25 h 0,1 Schematic: 0,51 1 n (1-3) : (6-4) 6 Unit Tol. 86 µH min. ±2% DC Resistance 1 60 mΩ ±20% DC Resistance 2 RDC 2 N (2-3) 20 °C 60 mΩ ±20% DC Resistance 3 RDC 3 N (6-5) 20 °C 230 mΩ ±20% DC Resistance 4 RDC 4 N (5-4) 20 °C 230 mΩ ±20% Leakage Inductance LS 100 kHz/ 100 mV 300 nH max. Insulation Test Voltage VT 1 mA/ 1s 2500 V (AC) 9.5 Vµs Voltage-Time ∫Udt N (1-2) Pins (1-3) Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] AEC-Q200 Grade 1 Automotive Approval 9,25 ref. Value 1:3.13 Component Qualification 1:3,13 12,6 max. 10 kHz/ 10 mV RDC 1 N (1-2) 20 °C 1) Scale- 2.5:1 L Yes General Information: 1 PRI 5V 420 kHz 2 5 SEC 15V Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging) 3 4 < 40 °C ; < 75 % RH Moisture Sensitivity Level (MSL) 1 OUTPUT CURRENT RATING: 250mAAC Scale- 2.5:1 Product Marking: Pin 1 • Marking - Partnumber Code 812515 Marking - Date Code YYWW CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PaC 002.001 2023-04-04 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-PSPA Push Pull Tranformer Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 78931812515 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1208 eiSos Valid 1/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] K0 P0 D0 T E1 A P2 W3 W A N B E2 B0 D F W1 close to center C Top Cover Tape A W2 P1 D1 T1 A0 T2 Feeding direction End detail B Carrier Tape Cover Tape Start B Cover Tape Chip Cavity Sprocket Hole No Component min. 160mm Tape Type Tolerance Value 2a A0 (mm) typ. 8,30 B0 (mm) typ. 12,60 W (mm) +0,3/ -0,1 24,00 Components T (mm) ref. 0,41 T1 (mm) ref. 0,10 T2 (mm) typ. 5,00 K0 (mm) typ. 4,50 No Component min. 100mm Cover Tape min. 400mm P0 (mm) ±0,1 4,00 P1 (mm) ±0,1 16,00 P2 (mm) ±0,1 2,00 D0 (mm) +0,1/ -0,0 1,50 D1 (mm) min. 1,50 E1 (mm) ±0,1 1,75 E2 (mm) min. 22,25 Embossment F (mm) ±0,1 11,50 Material Polystyrene Qty. (pcs.) 900 Tolerance Value A (mm) ± 2,0 330,00 B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) min. 60,00 W1 (mm) + 2,0 24,40 W2 (mm) max. 30,40 W3 (mm) min. 23,90 W3 (mm) max. 27,40 Material Polystyrene Packaging is referred to the international standard IEC 60286-3:2019 165° - 180° CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PaC 002.001 2023-04-04 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-PSPA Push Pull Tranformer Pull-off force Tape width 24 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 78931812515 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1208 eiSos Valid 2/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. H C Packaging Specification - Reel in Carton: [mm] W L C Tolerance Value LC (mm) typ. 395,00 WC (mm) typ. 395,00 HC (mm) typ. 240,00 C No. of Reel (pcs.) Qty. (pcs.) Material 4 3600 Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PaC 002.001 2023-04-04 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-PSPA Push Pull Tranformer Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 78931812515 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1208 eiSos Valid 3/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³