Dimensions: [mm]
Recommended Land Pattern: [mm]
0,95 bsc.
Properties
0,6
4
6
3
0,4
+0,05
-0,10
2,5
1
1,9 bsc.
0,95
0,6 ref.
1)
+0,24
-0,16
1,06
A
(Reverse) Peak Pulse Current
IPeak EFT
tp = 5/50ns
40
A
VESD Air
15
kV
VESD Contact
8
kV
1)
ESD Contact Discharge
Capability 2)
1)
2)
2+1
in positive and negative polarity
in positive and negative polarity
RoHS Approval
Compliant [2011/65/EU&2015/863]
REACh Approval
Conform or declared [(EC)1907/2006]
Halogen Free
Conform [JEDEC JS709B]
Halogen Free
Conform [IEC 61249-2-21]
Operating Temperature
-55 up to +125 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 90 % RH
Moisture Sensitivity Level (MSL)
3
Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently
VCh Clamp ESD was measured by Transmission Line Pulsing (TLP) System. TLP conditions:
Z0=50Ω,tp=100ns, tr=1ns
2
GND
3
I/O 2
Compliant: IEC 61000-4-2, -4 and -5
Flow-Thru Design:Route the data lines straight away under the TVS
diode I/O pins, that the data signal will not pass through the diode.
Product Marking:
Marking 1)
7
General Information:
1
I/O 1
Pin 1
tp = 8/20µs
I/O 2
4
1,45 max.
+0,05
-0,07
0,15
+5,0
-3,0
+0,09
-0,21
VDD
5
1,6 bsc.
0,51
3,0°
0,1
+0,05
-0,10
0,1 bsc.
Schematic:
I/O 1
6
Test conditions
Certification:
3
1,9
2,9 bsc.
Unit
IPeak
Channels
1,25
4
Value
(Reverse) Peak Pulse Current
ESD Air Discharge Capability
1,1
0,6 ref.
6
2,8 bsc.
1,1
1
Absolute Maximum Ratings (Ambient Temperature 25°C):
•
W00XY
X = Datecode; Y = Controlcode
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
RoD
001.002
2021-05-06
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WE-TVS TVS Diode – High Speed
Series
ORDER CODE
82400102
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
SOT23-6L
eiSos
Valid
1/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Electrical Properties:
Test conditions
Channel
Operating
Voltage
VCh
I/O to GND
DC Operating
Voltage
VDC
VDD to GND
(Reverse)
Breakdown
Voltage
VBR
I/O to GND; IBR=1mA
Leakage
Current
ILeak
VDD to GND; VDD=VDC; VGND=0V
Channel
(Reverse)
Leakage
Current
ICh Leak
I/O to GND
VDD=VDC; VI/O=VCh; VGND= 0V
Forward
Voltage
VF
GND to I/O; IF=15mA
(Channel) Input
Capacitance
CCh
Channel to
Channel Input
Capacitance
CCross
Channel ESD
Clamping
Voltage
Channel Surge
Clamping
Voltage
Polarity
Value
min.
typ.
max.
5
6
6
Unit Tol.
V
V
9
5
max.
100
max.
80
V
µA
1
120
µA
0.8
1
V
I/O to GND
VDD=5V; VI/O=2.5V; VGND=0V;
f=1MHz
2
2.5
pF
between I/O pins
VDD=5V; VI/O=2.5V; VGND=0V;
f=1MHz
0.4
0.6
pF
Derating [%]
Properties
Peak Pulse Power and Current Derating:
60
40
20
VCh Clamp
ESD
VCh Clamp
IEC 61000-4-2 +8kV (TLP=16A)
Contact Mode, I/O to GND
10
V
I/O to GND
5A, tp = 8/20 µs
7.7
V
0
Unidirectional
0
25
50
75
100
125
150
Ambient Temperature [°C]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
RoD
001.002
2021-05-06
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WE-TVS TVS Diode – High Speed
Series
ORDER CODE
82400102
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
SOT23-6L
eiSos
Valid
2/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Transmission Line Pulsing (TLP) Measurement:
Clamping Voltage vs. Peak Pulse Current:
18
12
I/O to GND
VDD to GND
16
10
14
8
Clamping Voltage [V]
TLP Current [A]
12
10
8
6
6
4
4
2
Waveform Parameters:
tr = 8 µs
td = 20µs
I/O to GND
2
VDD to GND
0
0
0
2
4
6
8
10
12
0
1
2
3
4
5
6
7
Peak Pulse Current [A]
TLP Voltage [V]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
RoD
001.002
2021-05-06
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WE-TVS TVS Diode – High Speed
Series
ORDER CODE
82400102
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
SOT23-6L
eiSos
Valid
3/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Variation of CIO vs. VIO:
4.0
I/O to GND
VDD = floated
GND = 0V
f = 1MHz
3.5
Capacitance [pF]
3.0
2.5
2.0
I/O to GND
VDD = 5V
GND = 0V
f = 1MHz
1.5
1.0
0.5
0.0
0
1
2
3
4
5
Voltage [V]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
RoD
001.002
2021-05-06
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WE-TVS TVS Diode – High Speed
Series
ORDER CODE
82400102
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
SOT23-6L
eiSos
Valid
4/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape: [mm]
Packaging Specification - Reel: [mm]
P0
A
K0
P2
T
W3
E1
D0
W1
close to center
B0
A
E2
N
W
F
D
B
C
Top Cover
Tape
D1
A
P1
W2
T1
A0
T2
End
Start
Feeding direction
Carrier Tape
detail B
Cover Tape
B
Cover Tape
Chip Cavity
Sprocket Hole
No Component
min.160mm
Components
No Component
min.100mm
Embossment
Cover Tape
min. 400mm
Packaging is referred to the international standard IEC 60286-3:2019
Tape Type
2a
A0
(mm)
typ.
3,17
B0
(mm)
typ.
3,23
W
(mm)
+0,3/ -0,1
8,00
T
(mm)
ref.
0,25
T1
(mm)
max.
0,10
T2
(mm)
typ.
K0
(mm)
typ.
1,37
P0
(mm)
±0,1
4,00
P1
(mm)
±0,1
4,00
P2
(mm)
±0,05
2,00
D0
(mm)
+0,1/ -0,0
1,50
D1
(mm)
min.
0,30
E1
(mm)
±0,1
1,75
E2
(mm)
min.
6,25
F
(mm)
±0,05
3,50
Material
Qty.
(pcs.)
Polystyrene
3000
165° - 180°
A
(mm)
± 2,0
178
B
(mm)
min.
1.5
C
(mm)
min.
12.8
D
(mm)
min.
20.2
N
(mm)
min.
50
W1
(mm)
+1,5
8.4
W2
(mm)
max.
14.4
W3
(mm)
min.
7.9
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
RoD
001.002
2021-05-06
DIN ISO 2768-1m
W3
(mm)
max.
10.9
Material
Polystyrene/ Polyurethane
PROJECTION
METHOD
DESCRIPTION
Pull-of force
Tape width
8 mm
0,1 N - 1,0 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WE-TVS TVS Diode – High Speed
Series
ORDER CODE
82400102
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
SOT23-6L
eiSos
Valid
5/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Inner Carton: [mm]
Packaging Specification - Outer Carton: [mm]
H
IC
H
C
ESD-Bag
L
W
W
IC
LIC
(mm)
typ.
184,00
WIC
(mm)
typ.
182,00
C
C
HIC
(mm)
typ.
80,00
L
IC
No. of
ESD-Bag (pcs.)
No. of
Reel (pcs.)
Qty.
(pcs.)
Material
4
4
12000
Paper
LC
(mm)
typ.
383,00
WC
(mm)
typ.
283,00
HC
(mm)
typ.
195,00
No. of
Inner Carton (pcs.)
Qty.
(pcs.)
Material
6
72000
Paper
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
RoD
001.002
2021-05-06
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WE-TVS TVS Diode – High Speed
Series
ORDER CODE
82400102
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
SOT23-6L
eiSos
Valid
6/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
tL
Preheat Area
Ts min
TC –5°C
Value
Preheat Temperature Min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
60 - 120 seconds
3 °C/ second max.
Liquidous Temperature
TL
217 °C
Time tL maintained above TL
tL
60 - 150 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
20 - 30 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
8 minutes max.
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Volume mm³
