Dimensions: [mm]
Recommended Land Pattern: [mm]
Absolute Maximum Ratings (Ambient Temperature 25°C):
Properties
Test conditions
IPeak
(Reverse) Peak Pulse Current
ESD Air Discharge Capability 1)
2,6
3,4
9
0,8
2,6
6
0,2 ±0,05
ESD Contact Discharge
Capability 2)
6
0,6
1)
2)
1
3,4
3,8 ±0,1
0,5 ±0,05
0,025 ±0,025
Scale - 10:1
1,0 ±0,1
A
VESD Air
15
kV
VESD Contact
15
kV
8
in positive and negative polarity
in positive and negative polarity
Certification:
5
1,6
Unit
5
Channels
1,55
5
0,2
9
0,3 ±0,05
A
1
0,8
detail A
1,6
Value
tp = 8/20µs
RoHS Approval
Compliant [2011/65/EU&2015/863]
REACh Approval
Conform or declared [(EC)1907/2006]
Halogen Free
Conform [JEDEC JS709B]
Halogen Free
Conform [IEC 61249-2-21]
Schematic:
I/O 8
9
I/O 7
8
I/O 6
7
I/O 5
6
General Information:
Operating Temperature
-55 up to +85 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 90 % RH
Moisture Sensitivity Level (MSL)
3
Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently
1
I/O 1
2
I/O 2
3
GND
4
I/O 3
5
I/O 4
VCh Clamp ESD was measured by Transmission Line Pulsing (TLP) System. TLP conditions: Z0=50Ω,
tp=100ns, tr=1ns
Compliant: IEC 61000-4-2 and -5
Scale - 10:1
Product Marking:
Pin 1
Marking 1)
1)
•
W1485XY
X = Datecode; Y = Controlcode
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
RoD
001.001
2021-04-22
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WE-TVS TVS Diode – Super Speed
Series
ORDER CODE
824014885
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
DFN3810-9L
eiSos
Valid
1/8
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Electrical Properties:
Test conditions
Channel Operating
Voltage
VCh
I/O to GND
(Reverse)
Breakdown
Voltage
VBR
I/O to GND; IBR=1mA
ICh Leak
I/O to GND
VI/O=VCh; VGND= 0V
Forward Voltage
VF
GND to I/O; IF=15mA
(Channel) Input
Capacitance
CCh
Channel to
Channel Input
Capacitance
CCross
Channel (Reverse)
Leakage Current
Channel ESD
Clamping Voltage
Polarity
Value
min.
typ.
max.
Unit
5
V
9
V
1
µA
0.9
1.2
V
I/O to GND
VI/O=2.5V; VGND=0V; f=1MHz
0.5
0.65
pF
between I/O pins
VI/O=2.5V; VGND=0V; f=1MHz
0.03
0.08
pF
6
VCh Clamp ESD IEC 61000-4-2 +8kV (TLP=16A)
Contact Mode; I/O to GND
10.5
Unidirectional
V
0
-5
-10
Insertion Loss [dB]
Properties
Insertion Loss SDD21 (I/O to GND):
-15
-20
-25
-30
1E+7
1E+8
1E+9
1E+10
Frequency [Hz]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
RoD
001.001
2021-04-22
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WE-TVS TVS Diode – Super Speed
Series
ORDER CODE
824014885
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
DFN3810-9L
eiSos
Valid
2/8
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Transmission Line Pulsing (TLP) Measurement:
Variation of CIO vs. VIO:
18
1.00
16
0.90
0.80
14
0.70
Capacitance [pF]
TLP Current [A]
12
10
8
0.60
0.50
0.40
6
0.30
4
0.20
2
0.10
0
I/O to GND
f = 1MHz
0.00
0
2
4
6
8
10
12
0
1
2
TLP Voltage [V]
3
4
5
6
Voltage [V]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
RoD
001.001
2021-04-22
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WE-TVS TVS Diode – Super Speed
Series
ORDER CODE
824014885
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
DFN3810-9L
eiSos
Valid
3/8
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Variation of CX vs. VIO:
0.09
0.08
0.07
Capacitance [pF]
0.06
0.05
0.04
0.03
0.02
0.01
I/O to I/O
f = 1MHz
0.00
0
1
2
3
4
5
6
Voltage [V]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
RoD
001.001
2021-04-22
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WE-TVS TVS Diode – Super Speed
Series
ORDER CODE
824014885
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
DFN3810-9L
eiSos
Valid
4/8
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape and Reel: [mm]
Packaging Specification - Reel: [mm]
P0
D0
W3
T
W1
close to center
B0
A
E2
N
W
F
B
D
E1
A
K0
P2
C
Top Cover
Tape
D1
A
P1
T1
A0
W2
T2
Feeding direction
End
Start
Carrier Tape
Cover Tape
detail B
B
Top
Cover Tape
Chip Cavity
Sprocket Hole
No Component
min.160mm
Components
No Component
min.100mm
Embossment
Bottom
Cover Tape
Cover Tape
min. 400mm
packaging is reffered to the international standard IEC 60286-3:2013
tolerance
size
A0
typ.
1,20
B0
typ.
4,00
W
+0,3/ -0,1
12,00
T
max.
0,25
T1
max.
0,10
T2
typ.
1,05
K0
typ.
0,70
P0
±0,1
4,00
P1
P2
D0
±0,05 ±0,05 +0,1/ -0,0
4,00
2,00
1,50
D1
min.
0,30
E1
±0,1
1,75
E2
min.
6,25
F
Tape Type 2a
±0,05
5,50
Polystyrene
VPE / packaging unit
pcs.
3000
165° - 180°
Tolerance
Value
A
(mm)
± 2,0
178
B
(mm)
min.
1.5
C
(mm)
min.
12.8
D
(mm)
min.
20.2
N
(mm)
min.
50
W1
(mm)
+1,5
8.4
W2
(mm)
max.
14.4
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
RoD
001.001
2021-04-22
DIN ISO 2768-1m
W3
(mm)
min.
7.9
W3
(mm)
max.
10.9
Material
Polystyrene
PROJECTION
METHOD
DESCRIPTION
Pull-of force
Tape width
8 mm
0,1 N - 1,0 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WE-TVS TVS Diode – Super Speed
Series
ORDER CODE
824014885
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
DFN3810-9L
eiSos
Valid
5/8
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
tL
Preheat Area
Ts min
TC –5°C
Value
Preheat Temperature Min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
60 - 120 seconds
3 °C/ second max.
Liquidous Temperature
TL
217 °C
Time tL maintained above TL
tL
60 - 150 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
20 - 30 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
8 minutes max.
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Volume mm³
