824550901

Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties 9,3 1,14 ± 0,38 7,94 ± 0,19 2,3 VDC (Reverse) Breakdown Voltage VBR Clamping Voltage 3,3 3,05 ± 0,15 4,7 Test conditions DC Operating Voltage 1 mA VClamp IPEAK (Reverse) Peak Pulse Current IPeak (Forward) Peak Pulse Current 1) IPeak 10/1000 µs 2,5 ±0,3 Cathode 105.5 V ±5% 146 V max. 20.5 A max. 300 A max. ILeak VDC 2 µA max. TA = 50 °C 6.5 W max. Power Dissipation 2) PDiss 10/1000 µs 3000 W max. Unidirectional 8.3 ms single half-sine wave or equivalent square wave. Duty cycle = 4 pulses per minute Mounted on 5.0 mm x 5.0 mm (0.03 mm thick) Copper Pads to each terminal Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform[JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] UL Approval UL497B: E478010, UL 1449: E332875 UL94 V-0 General Information: It is recommended that the temperature of the component does not exceed +150°C under worst case conditions Operating Temperature Cathode Band Anode Scale - 4:1 -65 up to +150 °C Storage Conditions (in original packaging) < 40 °C ; < 75 % RH Moisture Sensitivity Level (MSL) 1 Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently Product Marking: Marking max. PDiss Plastic Housing Flammability Rating 5,9 ± 0,32 2,34 ± 0,28 Schematic: Tol. V Steady State Power Dissipation Polarity Scale - 4:1 Unit 90 Leakage Current 1) 2) 6,86 ± 0,25 Value PGX CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE RoD 001.001 2020-05-08 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-TVSP Power TVS Diode Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 824550901 SIZE/TYPE BUSINESS UNIT STATUS PAGE DO-214AB eiSos Valid 1/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Maximum Peak Pulse Power Rating Peak Pulse Power and Current Derating 1000 100 90 80 100 Derating [%] Power [kW] 70 10 60 50 40 30 1 20 10 0,1 0 0,1 1 10 100 1000 0 50 Pulse Width [µs] 100 150 Ambient Temperature [°C] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE RoD 001.001 2020-05-08 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-TVSP Power TVS Diode Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 824550901 SIZE/TYPE BUSINESS UNIT STATUS PAGE DO-214AB eiSos Valid 2/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Maximum Non-Repetitive Forward Surge Current 7 350 6 300 5 250 Current [A] Power [W] Steady State Power Dissipation Derating 4 200 3 150 2 100 1 50 0 0 0 50 100 150 1 10 Ambient Temperature [°C] 100 Number of Cycles at 60 Hz CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE RoD 001.001 2020-05-08 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-TVSP Power TVS Diode Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 824550901 SIZE/TYPE BUSINESS UNIT STATUS PAGE DO-214AB eiSos Valid 3/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Typical Junction Capacitance 10.000 Capacitance [pF] 1.000 100 10 1 1 10 100 1000 Reverse Breakdown Voltage [V] V = 0V V = VDC CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE RoD 001.001 2020-05-08 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-TVSP Power TVS Diode Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 824550901 SIZE/TYPE BUSINESS UNIT STATUS PAGE DO-214AB eiSos Valid 4/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] P0 D0 P2 W3 T W1 close to center E1 A K0 B0 N A W E2 F D B C Top Cover Tape P1 D1 A T1 A0 W2 T2 Feeding direction End Start Carrier Tape detail B B Cover Tape Cover Tape Chip Cavity Sprocket Hole No Component min. 160mm Components Embossment No Component min. 100mm Cover Tape min. 400mm Packaging is referred to the international standard IEC 60286-3:2019 Tape Type 2a A0 (mm) typ. 6,27 B0 (mm) typ. 8,30 W (mm) +0,3/ -0,1 16,00 T (mm) ref. 0,30 T1 (mm) max. 0,10 T2 (mm) typ. 3,15 K0 (mm) typ. P0 (mm) ±0,1 4,00 P1 (mm) ±0,1 8,00 P2 (mm) ±0,1 2,00 D0 (mm) +0,1/ -0,0 1,50 D1 (mm) min. 1,50 E1 (mm) ±0,1 1,75 E2 (mm) min. 14,25 F (mm) ±0,1 7,50 Material Qty. (pcs.) Polystyrene 500 165° - 180° A (mm) ± 2,0 178,00 B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) min. 50,00 W1 (mm) + 2,0 16,40 W2 (mm) max. 22,40 W3 (mm) min. 15,90 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE RoD 001.001 2020-05-08 DIN ISO 2768-1m W3 (mm) max. 19,40 Material Polystyrene/ Polyurethane PROJECTION METHOD DESCRIPTION WE-TVSP Power TVS Diode Pull-of force Tape width 16 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 824550901 SIZE/TYPE BUSINESS UNIT STATUS PAGE DO-214AB eiSos Valid 5/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max Ts min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) Liquidous Temperature tL Preheat Area TC –5°C Value Preheat Temperature Min 60 - 120 seconds 3 °C/ second max. TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C ≥ 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³