82556200

Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions AC Operating Voltage DC Operating Voltage 0,7 0,7 1,6 ±0,15 0,75 Tol. V max. VDC 26 V max. 54 V max. (Reverse) Peak Pulse Current IPeak 8/20 µs 30 A max. Energy Absorption Wmax 10/1000 µs 0.1 J max. (Reverse) Breakdown Voltage VBR 1 mA 33 V ±10% (Channel) Input Capacitance CCh 1 kHz 200 pF typ. Certification: 2,2 0,8 ±0,1 Unit 20 VClamp 1.0 A @ 8/20 µs Clamping Voltage 0,3 ±0,2 Value VRMS Scale - 20:1 RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] Schematic: General Properties: It is recommended that the temperature of the component does not exceed +85°C under worst case conditions Operating Temperature -40 up to +85 °C 0,8 ±0,1 Storage Conditions (in original packaging) < 40 °C ; < 75 % RH Moisture Sensitivity Level (MSL) V 1 Scale - 20:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE BeBo 005.000 2020-02-27 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-VS SMT Varistor Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 82556200 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0603 eiSos Expired 1/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Rated Current vs. Voltage: Pulse Lifetime Derating: 1000 100 1 2 10 10 100 imax [A] Voltage [V] No. of Pulses 100 1.000 10.000 100.000 1.000.000 1 10 10 1 1E-5 1E-4 1E-3 1E-2 1E-1 1E+0 1E+1 100 1E+2 0,1 10000 1000 Pulse Duration [µs] Current [A] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE BeBo 005.000 2020-02-27 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-VS SMT Varistor Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 82556200 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0603 eiSos Expired 2/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] P0 W3 P2 A T (=K0) W F A N B W1 close to center D E1 D0 B0 E2 C Cover Tape W2 A0 P1 T1 A T1 End Feeding direction Start Carrier Tape detail B B Cover Tape Top Cover Tape Chip Cavity Sprocket Hole No Component min. 160mm Components Embossment No Component min.100mm Bottom Cover Tape Cover Tape min. 400mm Tape Type 1a A0 (mm) ±0,15 1,05 B0 (mm) ±0,15 1,90 W (mm) ±0,3 8,00 T (mm) ±0,05 0,95 T1 (mm) ref. 0,10 P0 (mm) ±0,1 4,00 P1 (mm) ±0,05 4,00 P2 (mm) +0,05 2,00 D0 (mm) +0,1 / -0,0 1,50 E1 (mm) ±0,1 1,75 E2 (mm) min. 6,25 F (mm) ±0,05 3,50 Material Qty. (pcs.) Paper 4.000 165° - 180° A (mm) ± 2,0 178 B (mm) ±0,5 2 C (mm) ±0,5 13 D (mm) ±0,8 21 N (mm) 1.5 62 W1 (mm) +1,5 8.4 W2 (mm) ± 1,0 13 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE BeBo 005.000 2020-02-27 DIN ISO 2768-1m W3 (mm) min. 8.5 W3 (mm) max. 9.5 Material Polystyrene PROJECTION METHOD DESCRIPTION WE-VS SMT Varistor Pull-of force Tape width 8 mm 0,1 N - 1,0 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 82556200 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0603 eiSos Expired 3/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³