865060762008

Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: + 4,5 ±0,2 0,45 -0,05 Test conditions Capacitance C Rated Voltage VR Surge Voltage VS 0.25 V/ 120 Hz/ +20 °C Value Unit Tol. 150 µF ±20% 63 V (DC) max. 1000 cycles @ 105 °C 72.4 V (DC) max. Leakage Current ILeak 2 min./ +20 °C 94.5 µA max. Dissipation Factor DF 0.25 V/ 120 Hz/ +20 °C 10 % max. 800 mA max. 180 mΩ max. IRIPPLE 100 kHz @ 105 °C Ripple Current 2,5 - 1,2 ±0,2 Properties Impedance Z 0.25 V/ 100 kHz/ +20 °C O 12,5 ±0,5 5,8 Scale - 2:1 0,3 max. 14,0 max. 4,3 Schematic: General Information: q 13,0 ±0,2 Aluminum Electrolytic Capacitors Operating Temperature -55 up to +105 °C Storage Conditions (in original packaging) 5 °C up to + 35 °C; 10 % up to 75 % RH Endurance 5000 h Moisture Sensitivity Level (MSL) 1 Test conditions of electrical properties: +20 °C, 35 % RH if not specified differently FIT according to separate documentation Surge Voltage: charging time 30 s, discharging time 330 s for a cycle Scale - 2:1 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE FPu 002.000 2023-05-02 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION TECHNICAL REFERENCE WCAP-ASLL Aluminum Electrolytic Capacitors ASEH140151M063DVCTGE000 ORDER CODE 865060762008 SIZE/TYPE BUSINESS UNIT STATUS PAGE 12.5 x 14.0 eiCap Valid 1/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Product Marking: 1st Line Capacitance Value: 150 µF ( Coding: 151 ) 2nd Line WCAP-ASLL & Datecode: YWW 3rd Line Rated Voltage: 63 V (DC) Multiplier for Ripple Current vs. Frequency: Frequency [Hz] 60 (50) 120 500 1K 10 K 50 K-100 K C ≤ 10 0.47 0.59 0.76 0.85 0.97 1 10 < C 0.52 0.65 0.8 0.89 0.97 1 Lifetime Performance: Test Conditions Endurance Shelf Life Life Time 5000 h @ 105 °C 1000 h @ 105 °C Voltage VR applied None Current IR None ∆C ≤ ±30 % of initial measured value ≤ ±30 % of initial measured value DF ≤ 300 % of the initial specified value ≤ 300 % of the initial specified value Leakage Current ≤ the initial specified value ≤ the initial specified value Comment Before measurement: Restore capacitor to 20 ° C, apply for VR for 30 min. Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE FPu 002.000 2023-05-02 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION TECHNICAL REFERENCE WCAP-ASLL Aluminum Electrolytic Capacitors ASEH140151M063DVCTGE000 ORDER CODE 865060762008 SIZE/TYPE BUSINESS UNIT STATUS PAGE 12.5 x 14.0 eiCap Valid 2/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] P0 D0 K0 P2 W3 T E A A0 A A C Top Cover Tape P1 T1 T2 Feeding direction End N W B d S B0 D F W1 close to center W2 Start Carrier Tape Cover Tape detail B B Cover Tape Chip Cavity Sprocket Hole No Component min.160 mm Components No Component min. 100mm Embossment Cover Tape min. 400mm Tape Type Tolerance Value 3 A0 (mm) ±0,2 13,90 B0 (mm) ±0,2 13,90 W (mm) ±0,3 32,00 T (mm) ±0,05 0,50 T1 (mm) ref. 0,10 T2 (mm) ±0,2 14,50 K0 (mm) typ. 14,30 P0 (mm) ±0,1 4,00 P1 (mm) ±0,1 24,00 P2 (mm) ±0,05 2,00 D0 (mm) ±0,1 1,50 D0 / 2 (mm) +0,05/ -0,0 0,75 d (mm) ±0,05 0,20 E (mm) ±0,1 1,75 S (mm) ±0,1 28,40 F (mm) ±0,1 14,20 Material Polystyrene Qty. (pcs.) 200 165° - 180° Pull-off force Tape width 32 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com Tolerance Value A (mm) ± 2,0 380 B (mm) ±0,5 2 C (mm) ±0,5 15 D (mm) ±0,8 21 N (mm) min. 80 W1 (mm) ±1,0 34 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE FPu 002.000 2023-05-02 DIN ISO 2768-1m W2 (mm) ±1,0 39 W3 (mm) ±1,0 34 Material Paper PROJECTION METHOD DESCRIPTION TECHNICAL REFERENCE WCAP-ASLL Aluminum Electrolytic Capacitors ASEH140151M063DVCTGE000 ORDER CODE 865060762008 SIZE/TYPE BUSINESS UNIT STATUS PAGE 12.5 x 14.0 eiCap Valid 3/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Inner Carton: [mm] Packaging Specification - Outer Carton: [mm] W H C H IC IC W L C L Tolerance Value LIC (mm) typ. 400,00 WIC (mm) typ. 390,00 HIC (mm) typ. 130,00 No. of Reel (pcs.) 3 Qty. (pcs.) 600 C IC Material Paper Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com Tolerance Value LC (mm) typ. 430,00 WC (mm) typ. 420,00 HC (mm) typ. 422,00 No. of Inner Carton (pcs.) Qty. (pcs.) Material 3 1800 Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE FPu 002.000 2023-05-02 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION TECHNICAL REFERENCE WCAP-ASLL Aluminum Electrolytic Capacitors ASEH140151M063DVCTGE000 ORDER CODE 865060762008 SIZE/TYPE BUSINESS UNIT STATUS PAGE 12.5 x 14.0 eiCap Valid 4/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³