875115150001

Recommended Land Pattern: [mm] Electrical Properties: Pw Fw1 OD pw L t qW Value ØD Length L Width W Material Thickness t Pw 3.1 ±0.2 mm Fw1 pw 2.8 mm fw1 8 4.2 Unit Test conditions Capacitance 0.25 V/ 120 Hz/ +20 °C Unit Tol. 220 µF ±20% UR 6.3 V (DC) max. max. Leakage Current 2 min./ +20 °C ILeak 277.2 µA Dissipation Factor 0.25 V/ 120 Hz/ +20 °C DF 8 % typ. T F Ripple Current 100 kHz @ 105 °C IRIPPLE 3500 mA max. ESR 100 kHz @ 20°C RESR 20 mΩ max. General Information: Aluminum Polymer Capacitors Storage Conditions 5-35 °C, < 75% RH Operating Temperature -55 °C up to +105 °C Endurance 2000 h Test conditions of Electrical Properties: +20°C, 35% RH if not specified differently FIT according to separate documentation Component conform to REACh and RoHS requirements and standards mm ±0.5 mm 8.3 mm ±0.2 0.15 mm max. Fw2 0.9 ±0.1 mm fw2 1.9 mm mm Value C Tol. 7.7 0.35 ±0.05 mm fw1 A R Schematic: D Properties Diameter Properties Rated Voltage fw2 + Fw2 Dimensions: [mm] max. Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CREATED CHECKED GENERAL TOLERANCE KaS PSL DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION TECHNICAL REFERENCE WCAP-PSHP Aluminum Polymer Capacitors PSEE077221M6R3DVCTDB000 ORDER CODE 875115150001 REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.001 Valid 2018-12-01 eiCap 1/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Component Marking: 1st Line Capacitance Value: 220 µF (Coding: 221 ) 2nd Line Rated Voltage: 6.3 3rd Line PSHP & datecode: YWW D A R Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com T F CREATED CHECKED GENERAL TOLERANCE KaS PSL DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION TECHNICAL REFERENCE WCAP-PSHP Aluminum Polymer Capacitors PSEE077221M6R3DVCTDB000 ORDER CODE 875115150001 REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.001 Valid 2018-12-01 eiCap 2/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max TC –5°C Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) Liquidous Temperature Time tL maintained above TL tL Preheat Area Value Preheat Temperature Min 3 °C/ second max. T F TL 217 °C tL 60 - 150 seconds Peak package body temperature Tp see table Time within 5°C of actual peak temperaure tp 20 - 30 seconds Ramp-down Rate (TL to TP) 6 °C/ second max. Time 25°C to peak temperature Ts min refer to IPC/ JEDEC J-STD-020E tS 60 - 120 seconds 8 minutes max. Package Classification Reflow Temperature: A R Properties PB-Free Assembly | Package Thickness < 1.6 mm 25 Time 25°C to Peak Time D Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com Volume mm³ 350-2000 Volume mm³ >2000 260 °C 260 °C 260 °C PB-Free Assembly | Package Thickness 1.6 mm - 2.5 mm 260 °C 250 °C 245 °C PB-Free Assembly | Package Thickness ≥ 2.5 mm 245 °C 245 °C refer to IPC/ JEDEC J-STD-020E Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Volume mm³