875585545003

Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: + 1,6 - 0,65 ±0,15 Properties 0,3 2,2 ±0,2 -0,05 2,1 Test conditions Capacitance C Rated Voltage VR Surge Voltage VS 0.25 V/ 120 Hz/ +20 °C 1000 cycles @ 20 °C Value Unit Tol. 100 µF ±20% 25 V (DC) max. 31.2 V (DC) max. Leakage Current ILeak 2 min./ +20 °C 25 µA max. Dissipation Factor DF 0.25 V/ 120 Hz/ +20 °C 14 % max. 1400 mA max. 30 mΩ max. Ripple Current IRIPPLE 100 kHz @ 125 °C ESR RESR 0.25 V/ 100 kHz/ +20 °C 3,5 O 6,3 ±0,5 7,7 ±0,3 0,3 max. Scale - 3:1 Schematic: General Information: q 6,6 ±0,2 Aluminum Hybrid Polymer Capacitors Operating Temperature -55 up to +125 °C Storage Conditions (in original packaging) 5 °C up to + 35 °C; 10 % up to 75 % RH Endurance 4000 h Moisture Sensitivity Level (MSL) 1 Test conditions of electrical properties: +20 °C, 35 % RH if not specified differently FIT according to separate documentation Surge Voltage: charging time 30 s, discharging time 330 s for a cycle Scale - 3:1 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE FPu 001.001 2023-03-24 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION TECHNICAL REFERENCE WCAP-HSAH Aluminum Hybrid Polymer Capacitors HSKD077101M025DVCPDD000 SIZE/TYPE BUSINESS UNIT STATUS PAGE 6.3 x 7.7 eiCap Valid 1/9 ORDER CODE 875585545003 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Component Marking: 1st Line Capacitance Value: 100 µF (Coding: 101) 2nd Line WCAP-HSAH & Datecode: YWW 3rd Line Rated Voltage: 25 V(DC) Multiplier for Ripple Current vs. Frequency Frequency 100 Hz ≤ freq. < 300 Hz 300 Hz ≤ freq. < 500 Hz 500 Hz ≤ freq. < 1 kHz Muliplier 0,1 0,15 0,2 1 kHz ≤ freq. < 2 kHz 0,3 2 kHz ≤ freq. < 3 kHz 0,4 3 kHz ≤ freq. < 5 kHz 0,45 5 kHz ≤ freq. < 10 kHz 0,5 Multiplier for Ripple Current vs. Frequency Frequency Muliplier 10 kHz ≤ freq. < 15 kHz 0,6 15 kHz ≤ freq. < 20 kHz 0,65 20 kHz ≤ freq. < 40 kHz 0,75 40 kHz ≤ freq. < 50 kHz 0,8 50 kHz ≤ freq. < 100 kHz 0,85 100 kHz ≤ freq. < 500 kHz 1 500 kHz ≤ freq. < 1000 kHz 1,05 Lifetime Performance: Test Conditions Endurance Moisture Resistance Lifetime 4000 h @ 125 °C 1000 h, stored @ 85 °C , RH 85 % Voltage VR applied VR applied Current IR applied None ∆C ≤ ±30 % of initial measured value ≤ ±20 % of initial measured value DF ≤ 200 % of the initial specified value ≤ 120 % of the initial specified value ESR ≤ 200 % of the initial specified value ≤ the initial specified value Leakage Current ≤ the initial specified value ≤ the initial specified value Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE FPu 001.001 2023-03-24 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION TECHNICAL REFERENCE WCAP-HSAH Aluminum Hybrid Polymer Capacitors HSKD077101M025DVCPDD000 SIZE/TYPE BUSINESS UNIT STATUS PAGE 6.3 x 7.7 eiCap Valid 2/9 ORDER CODE 875585545003 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] P0 P2 T W3 E1 D0 A N D W F B E2 B0 W1 close to center C Top Cover Tape A0 P1 K0 T1 W2 T2 End Start Feeding direction detail B Carrier Tape B Cover Tape Cover Tape Chip Cavity Sprocket Hole No Component min. 160mm Components No Component min. 100mm Embossment Cover Tape min. 400mm Tape Type Tolerance Value 2a A0 (mm) ±0,2 7,00 B0 (mm) ±0,2 7,00 W (mm) ±0,3 16,00 T (mm) ±0,05 0,40 T1 (mm) max. 0,10 T2 (mm) ±0,2 8,00 K0 (mm) typ. 7,84 P0 (mm) ±0,1 4,00 P1 (mm) ±0,1 12,00 P2 (mm) ±0,05 2,00 D0 (mm) ±0,1 1,50 E1 (mm) ±0,1 1,75 E2 (mm) min. 14,25 F (mm) ±0,1 7,50 Material Polystyrene Qty. (pcs.) 900 165° - 180° Pull-off force Tape width 16 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com Tolerance Value A (mm) ± 2,0 380,00 B (mm) ± 0,5 2,30 C (mm) ± 0,5 15,00 D (mm) ± 0,8 21,50 N (mm) min. 100,00 W1 (mm) ± 1,0 17,00 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE FPu 001.001 2023-03-24 DIN ISO 2768-1m W2 (mm) ± 1,0 20,00 W3 (mm) ± 1,0 17,00 Material Polystyrene PROJECTION METHOD DESCRIPTION TECHNICAL REFERENCE WCAP-HSAH Aluminum Hybrid Polymer Capacitors HSKD077101M025DVCPDD000 SIZE/TYPE BUSINESS UNIT STATUS PAGE 6.3 x 7.7 eiCap Valid 3/9 ORDER CODE 875585545003 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Inner Carton: [mm] Packaging Specification - Outer Carton: [mm] W H C H IC IC L IC W L C Tolerance Value LIC (mm) typ. 400,00 WIC (mm) typ. 390,00 HIC (mm) typ. 106,00 No. of Reel (pcs.) 4 Qty. (pcs.) 3600 Material Paper Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com Tolerance Value LC (mm) typ. 425,00 WC (mm) typ. 412,00 HC (mm) typ. 340,00 C No. of Inner Carton (pcs.) Qty. (pcs.) Material 3 10800 Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE FPu 001.001 2023-03-24 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION TECHNICAL REFERENCE WCAP-HSAH Aluminum Hybrid Polymer Capacitors HSKD077101M025DVCPDD000 SIZE/TYPE BUSINESS UNIT STATUS PAGE 6.3 x 7.7 eiCap Valid 4/9 ORDER CODE 875585545003 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³