Spezifikation für Freigabe / specification for release
Kunde / customer :
Artikelnummer / part number :
Bezeichnung :
description :
S14100039
STROMKOMPENSIERTE DROSSEL WE-CMB
COMMON MODE CHOKE WE-CMB
DATUM / DATE : 2015-07-23
A Mechanische Abmessungen / dimensions:
A
B
A
B
C
E1
E2
F1
F2
G
C
G
Glue
F1
F2
1
2
2
Front View
Side View
E2
2
4
3
mm
mm
mm
mm
mm
mm
mm
mm
Tape
E1
1
3
29,0 max.
20,0 max.
4,5 ± 0,5
12,0 ± 0,5
10,0 ± 0,5
1,8 max.
3,3 max.
29,0 max.
Bottom View
B Elektrische Eigenschaften / electrical properties:
Eigenschaften /
properties
Leerlauf-Induktivität /
inductance
DC-Widerstand /
DC-resistance
Nennstrom /
nominal current
Nennspannung/
nominal voltage
Testbedingungen /
test conditions
C Schaltbild / schematic:
Wert / value
Einheit / unit
tol.
10 kHz / 50µA
LO
0,285
mH
±30%
@ 20°C
RDC
1,6
mW
max.
IDC
25,0
A
max.
UN
250
VAC
max.
D Prüfgeräte / test equipment:
1
2
N1
N2
4
3
E Testbedingungen / test conditions:
WAYNE KERR WK3260B/WK3265 für/for L0/LN und/and RDC
Luftfeuchtigkeit / humidity:
33%
HP 34401 A für/for IN
Umgebungstemperatur / temperature:
+25°C
Prüfspannung / testing voltage
1500 V,50 Hz
3mA , 2 sec.
F Werkstoffe & Zulassungen / material & approvals
G Eigenschaften / general specifications:
Sockel / base:
UL94V-0
Klimabeständigkeit/ climatic class:
Draht / wire:
Class F (155°C)
Betriebstemp. / operating temperature:
40/125/21
Verguß / molding:
UL94V-2
Übertemperatur / temperature rise:
Abstandhalter / spacer:
UL94V-0
It is recommended that the temperature of the part does
-40°C - + 125°C
< 55 K
not exceed 125°C under worst case operating conditions.
Freigabe erteilt / general release:
..................................................................................
Datum / date
..................................................................................
Geprüft / checked
Kunde / customer
..................................................................................
Unterschrift / signature
Würth Elektronik
HasA
Version 3
15-07-23
HasA
Version 2
15-03-05
..................................................................................
HasA
Version 1
Kontrolliert / approved
Name
Änderung / modification
14-04-15
Datum / date
This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating thi s component into any equipment where higher safety and
reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in th e range of aerospace, aviation, nuclear control, submarine, transportation,
(automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information ne twork etc, Würth Elektronik eiSos GmbH must be informed before the
design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic componen t which is used in electrical circuits that require high safety and
reliability functions or performance.
Würth Elektronik eiSos GmbH & Co. KG
D-74638 Waldenburg · Max-Eyth-Strasse 1 -3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400
http://www.we-online.com
SEITE 1 VON 2
Spezifikation für Freigabe / specification for release
Kunde / customer :
Artikelnummer / part number :
Bezeichnung :
description :
S14100039
STROMKOMPENSIERTE DROSSEL WE-CMB
COMMON MODE CHOKE WE-CMB
DATUM / DATE : 2015-07-23
25
Attenuation [dB]
20
15
10
5
0
0,001
0,01
0,1
1
10
100
Frequency [MHz]
A (comm)
Freigabe erteilt / general release:
..................................................................................
Datum / date
..................................................................................
Geprüft / checked
A (diff)
Kunde / customer
..................................................................................
Unterschrift / signature
Würth Elektronik
HasA
Version 3
15-07-23
HasA
Version 2
15-03-05
..................................................................................
HasA
Version 1
Kontrolliert / approved
Name
Änderung / modification
14-04-15
Datum / date
This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating thi s component into any equipment where higher safety and
reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in th e range of aerospace, aviation, nuclear control, submarine, transportation,
(automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information ne twork etc, Würth Elektronik eiSos GmbH must be informed before the
design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic componen t which is used in electrical circuits that require high safety and
reliability functions or performance.
Würth Elektronik eiSos GmbH & Co. KG
D-74638 Waldenburg · Max-Eyth-Strasse 1 -3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400
http://www.we-online.com
SEITE 2 VON 2
