DK-V6-CONN-G-J

Domain-Specific Platforms Connectivity DE LIVE R I NG H IG H-SPE E D CON N ECTIVITY CAPAB I LITI ES ACROSS TH E SE R IAL SPECTR U M CONNECTIVITY PLATFORMS FOR VIRTEX-6 / SPARTAN-6 FPGAs Connectivity Design Challenges Key Connectivity Challenges • Scaling performance to meet changing requirements Ever-increasing I/O bandwidth is needed to address higher silicon processing capabilities and to meet constantly changing market dynamics. Parallel to serial transition is almost complete and serial (≤ 3.125Gb/s) to higher speed serial (≥ 5Gb/s) is imminent. Designers must address lower power, lower system cost and shrink existing form-factors. • Building systems for smaller form factors and stringent power budgets, at lower costs • Reducing design development time, accelerating market adoption Xilinx Connectivity Platforms • Support all popular serial protocols with Virtex®-6 FPGAs with built-in ultra-high speed >11Gb/s GTH transceivers and highly flexible 6.5Gb/s GTX transceivers • Enable targeting smaller form factors with Spartan®-6 FPGAs with the lowpower 3.125Gb/s GTP transceivers • Address power considerations and enable low-cost solution deployment with built-in blocks for PCIe®, Ethernet, and Memory Controllers • Accelerate development time with Targeted Reference Designs delivered with connectivity kits Xilinx Connectivity Platforms Simplify and Accelerate High-Speed Serial Deployment The Connectivity Platforms enable efficient implementation and faster deployment of customer end-product systems across the serial spectrum. Key elements of these platforms are: • FPGA silicon equipped development board with popular serial interfaces • Tools and plug-and-play IP tailored for connectivity methodologies • Targeted Reference Designs that integrate built-in blocks and soft IP both Xilinx and Alliance Partner IP • Software interface to enable users to setup, evaluate settings and modify to understand different implementations This complete and comprehensive approach accelerates development for experienced users and simplifies the adoption of FPGAs for new users. Complete Tool Flow Reduces Time-to-Market State-of-the-art serial connectivity tools are integrated in the ISE® Design Suite software to implement both established as well as new serial protocols. It also includes a comprehensive IP portfolio supporting industry leading serial protocols. In addition, Xilinx’s scalable board strategy enabled by on-board FPGA Mezzanine Card (FMC) connectors empowers customers to focus on innovation by reusing the design elements of the targeted reference designs. Target Market Applications Xilinx Connectivity platforms accelerate a broad range of applications, including: • Wired telecommunications and wireless infrastructure applications • Audio, video, and broadcast solutions • Industrial, automotive infotainment, and high-end consumer markets • Aerospace and Defense (A&D) and high-performance computing • Storage applications Domain-Specific Platforms Connectivity Silicon High-Performance Connectivity Solutions for Virtex-6 FPGAs VIRTEX-6 LXT FPGA • High Logic Density • High-Speed Serial Connectivity - 36 Low-Power GTX 6.5Gb/s Transceivers • Virtex-6 LXT/SXT FPGAs serve applications that require high-performance logic, DSP, and serial connectivity, with up to 36 low-power GTX 6.5Gb/s serial transceivers • Virtex-6 HXT FPGAs are optimized for communication, switching, and imaging systems that require the highest-speed serial connectivity, with up to 24 GTH 11.18Gb/s serial transceivers and 48 GTX 6.5Gb/s serial transceivers • 1.4Gb/s SelectIO™ technology to build high-bandwidth parallel interfaces LOGIC BLOCK RAM DSP PARALLEL I/O SERIAL I/O VIRTEX-6 SXT FPGA • High Logic Density • High-Speed Serial Connectivity - 36 Low-Power GTX 6.5Gb/s Transceivers • Enhanced DSP VIRTEX-6 HXT FPGA • High Logic Density • Ultra High-Speed Serial Connectivity - 24 GTH 11.18Gb/s Transcievers and 48 GTX 6.5Gb/s Transceivers Low-Cost, Easy-to-Use Connectivity Solutions for Spartan-6 FPGAs • Spartan-6 LXT FPGAs are the first to provide the necessary logic capacity, performance, power consumption, and price points to enable mainstream designers to use FPGA-based serial technology with up to 8 GTP 3.125Gb/s transceivers • 1.05Gb/s SelectIO technology to meet 3.3V to 1.2V parallel I/O standards and protocols along with hot swap compliance SPARTAN-6 LX FPGA • Lowest-Cost Logic LOGIC BLOCK RAM DSP SPARTAN-6 LXT FPGA • Lowest-Cost Logic • Low-Cost Serial Connectivity - 8 GTP 3.1258Gb/s Transcievers PARALLEL I/O SERIAL I/O Built-In Blocks and IP Portfolio • Maximize scalability of Virtex-6 FPGAs supporting up to 4 PCIe blocks (x1-x8 Gen1/Gen2) Endpoint and Root port configuration, up to 4 Ethernet blocks supporting 10/100/1000Mb/s operation through multiple interfaces • Simplified and optimized connectivity for Spartan-6 FPGAs using 1 PCIe block (x1 Gen1) Endpoint configuration and 4 Memory Interface controller blocks supporting DDR, DDR2, DDR3, and LP DDR interfaces • Xilinx IP portfolio, available through the CORE Generator™ system enables design with multiple protocols, streamlines design process, and improves design quality • Alliance Partner IP portfolio simplifies and maximizes design flexibility and reduces risk by supporting additional serial/parallel protocols and hardware acceleration functions Support for Industry Standard AXI4™ Interface The Xilinx Connectivity Targeted Design platforms now support the industry standard AXI interface for design creation and system integration. Users can now use a single interface specification that can be used to target the FPGA architectures to create high performance designs and simplify development & enhancement of these systems that include external memory and connectivity processing blocks. Tools and Design Flows Tailored for Connectivity Designs • Front-to-back design methodology with ISE Design Suite Logic/Embedded editions • Architecture Wizards–Transceiver, Clocking, CRC Wizards • Design analysis and synthesis–PlanAhead™ (floorplanning and PinLayout) and XST • Implementation tool–MAP, Timing driven Place & Route (P&R), and SmartXplorer • Debug tools–ChipScope™ Pro, SerialIO ToolKit, FPGA Editor • Guidelines and reports: - Signal integrity considerations - Transceiver characterization: generic and protocol specific reports - PCB design guidelines Domain-Specific Platforms Connectivity Targeted Reference Designs Accelerate system design development by integrating critical components–transceivers, IP blocks, and memory controllers. The connectivity kit framework includes: • Complete end-to-end system design enabling building block FPGA design architecture • Design fully tested, validated, supported, maintained, and updated for every revision of the ISE software release • Hardware Design Elements: RTL and IP files simulation environment, implementation scripts, and FPGA programming files • Enabling System Design using the industry standard AXI4 Streaming, Memory Mapped, Lite Interfaces for interfacing different IP blocks • Software Design Elements: source files including–device drivers, APIs, application, and GUI • Demonstration and documentation: User Guides, Getting Started Guides, Hardware Setup Guides PCIe Packet DMA User Application User Application NonXilinx Mixed Signal Embedded Logic • GTX transceivers running at PCIe (5.0Gb/s) and XAUI (3.125Gb/s) line rates • Xilinx IP LogiCORE for PCI Express Endpoint-x4 Gen2 or x8 Gen1 • Northwest Logic Packet DMA supporting >20G aggregate bandwidth • Xilinx IP LogiCORE for XAUI AXI MIG Memory Non- Embedded Mixed IP • GTP transceivers Logic at PCIe (2.5Gb/s) and GbE (1.25Gb/s) Xilinx Signalrunning line rates • Xilinx IP LogiCORE for PCI Express Endpoint–x1 Gen1 • Northwest Logic Packet DMA supporting >3G aggregate bandwidth • Xilinx Virtual-FIFO memory controller design using built-in Memory Interface Controller Block • Xilinx IP LogiCORE for Ethernet supporting GMII and SFP interfaces C onnectivity K it D esign F low 1. GETTING STARTED • • • • • Read the Getting Started Guide Connect the cables Power-up the board Load the reference designs Demo up and running DDR3 Component Spartan-6 Connectivity Targeted Reference Design includes: Glue Logic IP • Xilinx Virtual-FIFO memory controller design GbE (RJ-45) Spartan-6 LXT FPGA Virtex-6 Connectivity Targeted Reference Design includes: Memory GTP User Application Virtex-6 LXT FPGA Glue Logic Local Link to AXI4 Interface GbE (SFP) Memory Controller Block DDR3 SODIMM Local Link to AXI4-Stream Interface AXI4-Stream Interface x1 PCIe Gen1 (2.5Gbps) LogiCore IP for PCI Express AXI Ethernet AXI4 Interface Memory Controller Packet DMA XAUI IP LogiCORE Protocol Bridge XAUI (3.125Gbps) AXI4-Stream Interface Packet DMA X8 PCIe Gen1 (2.5 Gbps) Protocol Bridge OR AXI4-Stream Interface LogiCore IP for PCI Express AXI4-Stream Interface X4 PCIe Gen2 (5.0Gbps) Packet DMA & Memory Controller Interface AXI4-Stream Interface AXI4-Lite PCIe Packet DMA 2. EVALUATE • Evaluate reference design using interactive web-based user interface 3. CUSTOMIZE • • • • Open the design tools Customize the reference designs Generate a new design Download and run Domain-Specific Platforms Connectivity Connectivity Kits There are two Connectivity kits, each featuring either a Virtex-6 or Spartan-6 device. The kits are complete and easy-to-use right out of the box. Virtex-6 F PGA C onnectivity K it For more information, support, documents and reference designs, or to purchase, please visit www.xilinx.com/v6connkit Each Virtex-6 FPGA Connectivity Kit for high-bandwidth and high-performance connectivity applications features: • Xilinx ML605 Development Board including Virtex-6 LX240T FPGA • FMC Connectivity Daughter Card (CX4, SMA, SATA interfaces) • CX4 Loopback Module • ISE Design Suite Embedded Edition (device-locked to Virtex-6 LX240T FPGA) • Connectivity Targeted Reference Design: PCIe-10GDMA-DDR3-XAUI S partan-6 F PGA C onnectivity K it For more information, support, documents and reference designs, or to purchase, please visit www.xilinx.com/s6connkit Each Spartan-6 FPGA Connectivity Kit for easy-to-use connectivity applications features: • Xilinx SP605 Development Board including Spartan-6 LX45T FPGA • FULL seat of a Production Netlist of Northwest Logic x1 Packet DMA Back-end core (single seat node-locked license) • ISE Design Suite Embedded Edition (device-locked to Spartan-6 LX45T FPGA) • Connectivity Targeted Reference Design: PCIe-DMA-DDR3-GbE Each kit also includes: • Board design files • Fedora 10 Live CD • Cables and power supply • Getting Started Demonstration • Documentation: Hardware Setup Guide, Getting Started Guide, and User Guides • Reference designs, demos, documentation, and applications delivered on USB memory stick to get started quickly Take the NEXT STEP Visit us online at www.xilinx.com/connectivity Corporate Headquarters Europe Japan Asia Pacific Xilinx, Inc. 2100 Logic Drive San Jose, CA 95124 USA Tel: 408-559-7778 www.xilinx.com Xilinx Europe One Logic Drive Citywest Business Campus Saggart, County Dublin Ireland Tel: +353-1-464-0311 www.xilinx.com Xilinx K.K. Art Village Osaki Central Tower 4F 1-2-2 Osaki, Shinagawa-ku Tokyo 141-0032 Japan Tel: +81-3-6744-7777 japan.xilinx.com Xilinx, Asia Pacific Pte. Ltd. 5 Changi Business Park Singapore 486040 Tel: +65-6407-3000 www.xilinx.com © Copyright 2009 Xilinx, Inc. XILINX, the Xilinx logo, Virtex, Spartan, ISE and other designated brands included herein are trademarks of Xilinx in the United States and other countries. All other trademarks are the property of their respective owners. Printed in the U.S.A. PN 2460