ACM06US09

ACM06 Series AC-DC Power Supplies 6 Watt xxx Series • Energy Efficiency Level VI • European CoC Tier 2 • Medical and ITE Approvals • Interchangeable Mains Connectors • Optional White Versions • Output Voltages from 5 V to 12 V • Class II Construction • 3 Years Warranty The ACM06 series of wall plug adaptors comply with the latest energy efficiency level VI standards with high active mode efficiency and extremely low no load power consumption. Available with a standard jack plug connector as well as USB versions, these adaptors suit a wide variety of cost sensitive industrial and medical applications while maintaining industry leading performance. Dimensions: ACM (body only): 2.89 x 1.21 x 1.67” (73.5 x 30.7 x 42.5 mm) Models & Ratings Output Power 6W Output Voltage Output Current Total Regulation(3) Efficiency(4) Model Number(1,2,5) 5.0 V 9.0 V 1000 mA 600 mA 5% 5% 80.0% 79.8% ACM06US05(6) ACM06US09 12.0 V 500 mA 5% 82.0% ACM06US12 Notes 1. Model number is for body only. AC input plugs must be ordered separately, see AC input plug section. 2. Other output voltages available, contact sales for details. 3. Total regulation includes initial set accuracy, line and load regulation. 4. Typical average value measured at 115 VAC. 5. For white case version add suffix ‘-W’ e.g. ACM06US12-W. MOQ applies, contact sales for details. 6. For 5 V version with optional USB type A connector in case, add suffix -BB, e.g ACM06US05-BB. Input Characteristic Input Voltage Input Frequency Input Current Inrush Current Power Factor No Load Input Power Input Protection Minimum 90 47 Typical Maximum 264 63 0.2 70 Units VAC Hz A A 75 mW Maximum 12 5 Units V A s ms ms % 4 % deviation Notes & Conditions 100 VAC 240 VAC, cold start at 25 °C EN61000-3-2, class A Internal fuse in line Output Characteristic Output Voltage Minimum Load Start Up Delay Start Up Rise Time Hold Up Time Total Regulation Transient Response 1 Minimum 5 0 Typical 4 30 10 Ripple & Noise 150 mV pk-pk Short Circuit Protection Temperature Coefficient 0.05 %/ ˚C Notes & Conditions See Models and Ratings table No minimum load required Full load and 100 VAC See Models and Ratings table For a 50% step load change at 0.15 A/μs Measured with 20 MHz bandwidth and 10 μF electrolytic in parallel with 0.1 μF ceramic capacitor Continuous, trip and restart (hiccup mode) with auto recovery www.xppower.com ACM06 Series AC-DC Power Supplies General Characteristic Minimum Typical Maximum Units 80 Efficiency Notes & Conditions Typical average of efficiencies measured at 25%, 50%, 75% and 100% load and 115 VAC input % Energy Efficiency Isolation Level VI 4000 20 Leakage Current Switching Frequency 24 Mean Time Between Failure 250 Weight VAC Input to Output, 2 x MOPP 100 µA At 264 VAC, 60 Hz, from output to ground 70 kHz kHrs Variable lb (g) Body only 0.22 (100) MIL-HDBK-217F at 25 °C GB Environmental Characteristic Operating Temperature Storage Temperature Operating Humidity Minimum Typical Maximum Units 0 +60 °C -20 5 +85 90 °C % 5000 m Operating Altitude Notes & Conditions Derate from 100% load at 40 °C to 50% load at 60 °C RH, non-condensing Cooling Natural convection Shock 1 m drop onto concrete on each of 6 axes, non operating Vibration 300 10 Hz 2 g, 0.3 decades/min, 15 mins for each of 3 axes EMC: Emissions Phenomenon Standard Test Level Conducted EN55032 Level B Radiated EN55032 Level B Harmonic Current EN61000-3-2 Class A Voltage Flicker EN61000-3-3 Notes & Conditions EMC: Immunity Phenomenon Medical Device EMC Low Voltage PSU EMC Standard Test Level Criteria IEC60601-1-2 Ed.4.0 : 2014 as below EN61204-3 High severity level as below ESD Immunity EN61000-4-2 ±8 kV contact, ±15 kV air A Radiated Immunity EN61000-4-3 10 V/m A EFT/Burst EN61000-4-4 Level 3 A Surge EN61000-4-5 Level 2 A Conducted Immunity EN61000-4-6 6V A Magnetic Fields EN61000-4-8 30 A/m Dip: 100% 10 ms Dip: 70% 500 ms A A B Int: 100% 5000 ms B Dip: 30% 25 AC Cycles A EN61000-4-11 Dips and Interruptions EN60601-1-2 Int: 100% 0.5 AC Cycle At 8 angles, A at 115 VAC, B at 100 VAC Int: 100% 1 AC Cycle B Int.: >95% 5000 ms B www.xppower.com Notes & Conditions 2 ACM06 Series AC-DC Power Supplies Safety Approvals Certification Safety Standard Notes & Conditions UL60950-1, UL62368-1 UL EN CB Information Technology ANSI/AAMI ES 60601-1 Medical, 2 x MOPP EN60950-1, EN62368-1 Information Technology EN60601-1 Medical, 2 x MOPP IEC60950-1, IEC62368-1 Information Technology IEC60601-1 Medical, 2 x MOPP CSA CSA C22.2 No. 60601 Medical, 2 x MOPP CCC China Compulsory Certification, GB4943 AU/NZ AU/NZ 60950.1 CE Meets all applicable directives UKCA Meets all applicable legislation Mechanical Details ACM06USXX 70.8 (1800 ±10%) 2.89 ±0.03 (73.5 ±1.0) 0.43 ±0.01 (11.0 ±0.05) 1.67 ±0.03 (42.5 ±1.0) ø0.09 (ø2.5) ø0.21 (ø5.5) 1.20 ±0.03 (30.7 ±1.0) 2.89 ±0.03 (73.5 ±1.0) ACM06US05-BB 1.67 ±0.03 (42.5 ±1.0) 1.20 ±0.03 (30.7 ±1.0) Notes ACM06USXX output plug ø5.5 x ø2.5 x 11.0mm, centre positive. ACM06USXX output lead: UL2468, 18 AWG. 3 www.xppower.com 3 ACM06 Series AC-DC Power Supplies AC Input Plugs Black UK Plug: ACM PLUG UK White UK Plug: ACM PLUG UK W Black USA Plug: ACM PLUG US White USA Plug: ACM PLUG US W 1.73 (44.1) ±0.02 (±0.6) 1.25 (32.0) ±0.11 (±0.5) 0.15 (3.97) ±0.1 (±0.15) R3 1.94 (49.4) ±0.02 (±0.6) 1.16 (29.5) ±0.11 (±0.5) 0.05 (1.5) ±0.003 (±0.1) R3 0.87 (22.2) ±0.1 (±0.15) 0.24 (6.3) ±0.003 (±0.1) 0.62 (16.0) ±0.01 (±0.5) 0.35 (9.0) ±0.11 (±0.5) 0.27 (7.0) ±0.007 (±0.2) 0.5 (12.7) ±0.007 (±0.2) 0.69 (17.7) ±0.01 (±0.5) 0.89 (22.7) ±0.01 (±0.5) 0.66 (17.0) ±0.11 (±0.5) 0.03 (4.0) ±0.003 (±0.1) 1.26 (22.25) ±0.007 (±0.2) 0.31 (7.9) ±0.003 (±0.1) Black Australian Plug: ACM PLUG AU White Australian Plug: ACM PLUG AU W Black European Plug: ACM PLUG EU White European Plug: ACM PLUG EU W 0.35 (9.0) ±0.01 (±0.3) R 0.8 (20.5) 1.16 (29.5) ±0.02 (±0.6) 1.16 (29.5) ±0.02 (±0.6) 0.06 (1.6) ±0.1 (±0.003) 1.25 (32.0) ±0.02 (±0.6) 1.26 (32.1) ±0.02 (±0.6) 0.24 (6.3) ±0.1 (±0.003) 0.7 (17.8) ±0.02 (±0.6) 0.34 (8.8) ±0.1 (±0.003) 1.40 (35.6) ±0.01 (±0.6) 0.71 (18.2) ±0.01 (±0.5) 0.35 (9.0) ±0.01 (±0.5) 1.16 (29.5) ±0.01 (±0.6) 0.6 (17.0) 0.69 (17.6) ±0.007 (±0.2) 0.55 (14.1) ±0.01 (±0.5) 0.74 (19.0) ±0.01 (±0.5) 1.61 (41.0) ±0.02 (±0.6) Black China Plug: ACM PLUG CN White China Plug: ACM PLUG CN W 1.16 (29.5) ±0.01 (±0.5) 0.35 (9.0) ±0.01 (±0.5) 1.25 (32.0) ±0.01 (±0.5) 0.62 (16.0) ±0.01 (±0.5) 0.24 (6.3) ±0.003 (±0.1) 0.05 (1.5) ±0.003 (±0.1) 0.5 (12.7) ±0.007 (±0.2) www.xppower.com 17 July 2021