AEL80US12

AC-DC 15 Watts AEL Series • • • • • • • xppower.com CEC 2008 & EISA 2007 Compliant Approved as LPS China Compulsory Certfication (CCC) Qualified High Efficiency +70 °C Operating Temperature Compact Dimensions Optional Input Connector Specification Input Input Voltage Input Frequency Input Current Inrush Current Earth Leakage Current Power Factor Input Protection Standby Power Consumption • • • • • • • • 90-264 VAC 47-63 Hz 0.4 A at 115 VAC 15 A/30 A for 115 VAC/230 VAC, cold start 0.75 mA at 240 VAC Meets EN61000-3-2 Fitted with internal fuse Typically 0.3 W, max 0.5 W General Efficiency Isolation • 85% typical • 3000 VAC Input to Output 1500 VAC Input to Ground 500 VDC Output to Ground • 63 kHz typical • 300 kHrs to MIL-STD-217F Switching Frequency MTBF Environmental Operating Temperature • 0 °C to +70 °C, derate from 100% power at +40 °C to 50% power at +70 °C Storage Temperature • -40 °C to +85 °C Cooling • Convection cooled Operating Humidity • 5-95% RH, non-condensing Operating Altitude • 3000 m Shock • 10 g, 10 ms on 3 axes Vibration • 5-100 Hz 2.31 m/s2, 20 mins 3 axes Output Output Voltage Minimum Load Hold Up Time Start Up Delay Transient Response Line Regulation Load Regulation Ripple & Noise Short Circuit Protection Temperature Coefficient • • • • • • • • • • See tables No minimum load required 5 ms min at full load 110 VAC 2.0 s at full load 100 VAC 2% deviation, recovery to within 1% of nominal in 4 ms for 50% load change See tables See tables 1% pk-pk max, 20 MHz BW. See note 3. Trip & restart (Hiccup mode), auto recovery ±0.04%/°C EMC & Safety Emissions Harmonic Current Voltage Flicker ESD Immunity Radiated Immunity EFT/Burst Surge Conducted Immunity Magnetic Field Dips & Interruptions • EN55022 FCC Part-15C Level B conducted & radiated • EN61000-3-2 Class A • EN61000-3-3 • EN61000-4-2 Level 3 Perf criteria A • EN61000-4-3 3 V/m Perf criteria A • EN61000-4-4 Level 2 Perf criteria A • EN61000-4-5 Level 3 Perf criteria A • EN61000-4-6 Level 2 Perf criteria A • EN61000-4-8 1 A/m Perf criteria A • EN61000-4-11, 70% UT for 500 ms, 40% UT for 100 ms,