ASB160PS12

ASB160 Series 160W AC-DC AC-DC POWER POWER SUPPLIES SUPPLIES BASEPLATE COOLED The ASB160 series is a range of complete low profile, full brick, baseplate cooled AC-DC power supplies which requires no external components. The series includes a complete built in EMC filter and AC fuse as well as bulk storage capacitor providing a complete AC-DC power solution ready for installation into end applications. The ASB160 offers high efficiency to minimise waste heat and heat sinking requirements and operates from -40°C to +90°C on the module baseplate. Features Applications • Complete AC-DC power supply • No extra components required • Baseplate cooled full brick package • Low profile • Input range 90 to 264VAC AC-DC Converters Industrial Electronics Instrumentation Railway Security Technology • Single outputs from 12 to 54VDC • Output voltage trim ±5% • High efficiency - up to 93% • Over current, over voltage and over temperature protection • Optional heatsink available • -40 to +90°C baseplate operating temperature Dimensions • 3 year warranty 2.40 x 4.60 x 0.78” (61.0 x 116.8 x 19.7 mm) Models & Ratings Model number(1) Output Voltage Output Current Ripple & Noise Efficiency(2) ASB160PS12 12.0V 13.30A 120mV 92.0% ASB160PS15 15.0V 10.66A 150mV 93.0% ASB160PS24 24.0V 6.66A 240mV 92.0% 36.0V 4.44A 360mV 93.0% ASB160PS48 48.0V 3.33A 480mV 93.0% ASB160PS54 54.0V 2.96A 540mV 91.0% ASB160PS36 Output Power 160W ` Notes: 1. Add suffix ‘-HK’ to receive with optional heat-sink fitted. 3. Optional heatsink can be ordered as a separate item using part number IFH HEATSINK 2. Typical efficiency with 230VAC input and full load. ASB160 Series AC-DC POWER SUPPLIES Input Characteristic Minimum Input Voltage 90 Input Frequency 47 Typical Maximum Units 264 VAC 63 Hz 1.7/0.82 Input Current Inrush Current Earth Leakage Current A 115VAC/230VAC 100 A 230VAC, cold start at 25°C 750 µA 264VAC, 60Hz 0.9 Power Factor Notes & Conditions Full load No Load Input Power 0.5/0.7 W Maximum Units 12V-48V/54V Internal T3.15A/250VAC fitted in line Input Protection General Characteristic Minimum Typical 92 Efficiency % Isolation: Input to Output 3000 VAC Input to Ground 1500 VAC Output to Ground 500 VAC 180 250 kHz 100 150 Switching Frequency 18.5 Power Density Mean Time Between Failure See models and ratings table Main converter, variable, load dependant PFC W/in3 160 khrs 0.62 (280) Weight Notes & Conditions MIL-HDBK-217F at 25°C GB and 115VAC lb(g) Output Characteristic Output Voltage Minimum 12 Maximum Units Notes & Conditions 54 VDC See Models and Ratings table 1 Initial Set Accuracy Output Voltage Trim Typical 95 % At 60% load 105 % Of nominal output voltage. See application note 1.3 s 10 ms No minimum load required Minimum Load Start Up Delay Start Up Rise Time Hold Up Time 8 10 ms Full load and 115VAC Line Regulation ±0.5 % Load Regulation ±0.5 % Transient Response 2 % Maximum deviation, recovering to less than 1% within 300µs for 25% step load Ripple and Noise 1 % pk-pk 20MHz bandwidth, measured with 20MHz Bandwidth and 10µF electrolytic in parallel with 0.1µF ceramic capacitor Overload Protection 110 140 % Overvoltage Protection 110 150 % Short Circuit Protection Trip and restart (hiccup), auto resetting Thermal Protection Measured internally at the baseplate, auto resetting Temperature Coefficient Remote Sense 0.02 5 Auto recovery except 54V version recycle AC to reset %/°C After 20 minute warm up % Maximum compensation 2 ASB160 Series AC-DC POWER SUPPLIES Environmental Characteristic Operating Temperature Minimum Typical Maximum -40 Units +90 °C 5 90 %RH -40 +90 °C 5000 m Notes & Conditions Baseplate Temperature, see derating curve Conduction cooled via baseplate Cooling Operating Humidity Storage Temperature Operating Altitude Shock IEC68-2-27, 30g, 11ms half sine, 3 times in each of 6 axes Vibration IEC68-2-6, 10-500Hz, 2g 10 mins/sweep, 60 mins for each of 3 axes Non-condensing EMC: Emissions Phenomenon Standard Test Level EN55032 Level B Harmonic Currents EN61000-3-2 Class A Voltage Flicker EN61000-3-3 Conducted ESD Notes & Conditions EMC: Immunity Phenomenon Standard Radiated Radiated Immunity EFT/Burst Surge Conducted EN61000-4-6 Dips and Interruptions Test Level Criteria EN61000-4-2 3/2 A EN61000-4-3 3V/m A EN61000-4-4 2 A EN61000-4-5 Installation Class 3 A EN61000-4-11 Notes & Conditions ±8kV air/±4kV contact 3V A Dip: 100% 10ms A/B High Line/Low Line Dip: 30% 500ms A/B High Line/Low Line Int: 100% 5000ms B Safety Approvals Safety Agency Standard UL UL62368-1 TUV EN62368-1 CB IEC62368-1 CE Meets all applicable directives UKCA Meets all applicable legislation Notes & Conditions 3 ASB160 Series AC-DC POWER SUPPLIES Mechanical Details 4.20 (106.7) 4.20 (106.7) 0.299(7.60) (7.60) 0.299 FG FG Earth Earth Moun ng inserts ø0.13 (3.2) through 4 places Moun ng inserts ø0.13 (3.2) through 4 places 4.20 (106.7) 4.20 (106.7) 0.299(7.60) (7.60) 0.299 ACN ACN 0.299(7.60) (7.60) 0.299 +Sen +Sen +Vout +Vout Trim Trim -Vout -Vout -Sen -Sen ACL ACL 0) (1.00) 39 1.00 0.039 (2 0 )) . ( 3- 0.079 2.00 3- 0.0 9 ( 5- 0.07 5- 0.299(7.60) (7.60) 0.299 0.400 (10.16) 0.400 (10.16) 0.400 (10.16) 0.400 (10.16) 2.00 (50.8) 2.00 (50.8) 2.40 (61.0) 2.40 (61.0) 0.20 (5.1) 0.20 (5.1) 0.23 (5.9) 0.23 (5.9) 0.78 (19.7) 0.78 (19.7) Grey Grey 4.60 (116.8) 4.60 (116.8) Heatsink Option 4.20 (106.7) 4.20 (106.7) 1.0 (25.4) 1.0 (25.4) 4.60 (116.8) 4.60 (116.8) Notes: 1. Dimensions shown in inches (mm). 2. Weight: 0.62lb (280g) 3. Pin diameter: 0.08 ±0.002 (2.0 ±0.05) 4. Pin pitch tolerance: ±0.014 (±0.35) 5. Case tolerance: ±0.02 (±0.5) 6. Baseplate is connected to FG Pin Derating Curve 0 0 -40 -30 -40 -30 -20 -20 -10 -10 0 10 0 10 20 30 20 30 40 40 50 Ambient Ambient Temperature Temperature (°C) (°C) 50 60 60 70 70 80 80 90 90 Load (%) 50 50 100 Some specification parameters may not be met Some specification parameters may not be met 100 With IFH With HEATSINK IFH HEATSINK Load (%) Load (%) 50 100 Some specification parameters may not be met Some specification parameters may not be met Load (%) 100 50 0 0 -40 -30 -40 -30 -20 -20 -10 -10 0 10 0 10 20 30 20 30 40 40 50 50 60 60 70 70 80 80 90 100 90 100 Baseplate Baseplate Temperature Temperature (°C) (°C) When ASB160 is fitted with IFH HEATSINK and mounted in horizontal position with heatsink upper most, the baseplate temperature will typically be 85°C in an Lifetime Lifetime ambient of 40°C. KHrs KHrs 400 400 200 200 100 50 100 50 4 Rd Trim Trim Load Load ASB160 Series -Vo -Vo Ru Load Load 100 90 Efficiency (%) Efficiency Curves 80 ASB160PS12 70 60 80 70 70 60 60 50 50 10 70 40 50 60 70 80 90 50 100 10 20 2030 30 40 4050 50 60 6070 70 80 8090 230 VAC 100 100 10 Efficiency (%) Efficiency (%) 9020 90 30 80 115 VAC ASB160PS24 60 100 100 10 80 90100 100 90 20 90 Efficiency (%) 90 30 80 80 70 70 60 60 50 50 10 40 50 60 70 80 90 100 115 VAC 115 230 VAC 230 10 20 2030 30 40 4050 50 60 6070 70 80 80 90 90100 100 Output Voltage Adjustment Trim down Trim up +Vo +Vo Trim Rd Trim Load -Vo Ru Load -Vo To Trim Down Connecting an external resistor (Rd) between the Trim pin and the +Vo pin decreases the output voltage. The following table can be used to determine the required external resistor value to obtain a percentage output voltage change of 5%. 12V Trim Down (%) 15V 24V 100 5 288.7 398.5 Efficiency (%) 50 Ru -Vo -Vo 100 Efficiency (%) Efficiency (%) 0 Trim Trim Rd 36V 48V 54V 1215 1776 2005 Rd (kΩ) 738 90 80 115 VAC To Trim Up 230 VAC Connecting an external resistor (Ru) between the Trim pin and the -Vo pin increases the output voltage. The following table can be used to determine the required external 70 resistor value to obtain a percentage output voltage change of 5%. 60 20 30 Up (%) 40 Trim 5 50 60 12V 70 79 80 90 15V 100 84 50 10 20 24V 30 40 50 Ru (kΩ) 90.8 18 January 2023 36V 60 92.8 70 80 48V 90 89.4 100 54V 90.8 35