CPC60UT2

Triple Output Switchers 15-60 Watts CPC Series • THE XPERTS IN POWER Low Profile • Small, Compact PCB Format • Isolated Auxiliary Outputs • Low Noise • 85-264 VAC Universal Input • Optional Covers & Looms • International Safety Approvals Specification Input Input Voltage Input Frequency Inrush Current • • • 85-264 VAC (110-370 VDC) 47-440 Hz 60 A max at 200 V input & full load (cold start) Leakage Current Mating Connectors Cable Looms Covers • • • • Isolation • Input to output 3000 VAC for 1 min, 500 VDC, 50 Mohm Input to earth 2000 VAC for 1 min, 500 VDC, 50 Mohm Output to earth 500 VAC for 1 min, 500 VDC, 50 Mohm 0.75 mA max. Available as an option Available as an option Available as an option Output Hold-Up Time Output Voltage Output Voltage Adjustment Output Voltage Set Point Line Regulation Load Regulation Ripple & Noise Minimum Load Short Circuit & Overload Protection Overvoltage Protection • • • • • • • • • • 10 ms min at 85 V input & full load (100 ms typical at 200 V input) See Table, 5 V adjustable, V1 is isolated from V2 & V3 5 V ±5% ±6% max 0.4% max over specified input range 2% 5 V output, 1% auxiliary outputs 40 mV pk-pk typical (180 mV pk-pk max) No minimum load - See Note 3 Operates >105% of rating auto recovery Operates >115% of rating +5 V output Environmental Operating Temperature Storage Temperature Relative Humidity Vibration Shock • • • • • -10°C to +70°C, derate above +50 °C Consult Sales Office -20 °C to +75 °C 20-90% non-condensing 10-55 Hz at 2 G, 3 mins period for 60 mins along X, Y & Z axis 20 G for 11 ms, once on X, Y & Z axis EMC & Safety EMC Safety Approvals • • FCC curve B, EN55022B Approved to UL1950, IEC950, CSA22.2 No.234, EN60950 General Switching Frequency • Efficiency • Variable frequency 40-400 kHz dependant on line & load 70-72% typical • • www.xpplc.com sales@xpplc.com AC-DC Power Supplies OUTPUT VOLTAGE & CURRENT RATINGS Output Power 15 W 15 W 30 W 30 W 60 W 60 W Output 1(1) @ 2.0 A (3.0 @ 2.0 A (3.0 @ 3.0 A (4.5 @ 3.0 A (4.5 @ 5.0 A (7.0 @ 5.0 A (7.0 Output Ratings Output 2(2) +12 V @ 0.3 A (0.6 A +15 V @ 0.3 A (0.6 A +12 V @ 1.2 A (2.0 A +15 V @ 1.0 A (2.0 A +12 V @ 2.5 A (3.5 A +15 V @ 2.0 A (3.5 A Output 3(2) @ 0.2 A (0.30 @ 0.2 A (0.30 @ 0.3 A (0.45 @ 0.3 A (0.45 @ 0.5 A (0.70 @ 0.5 A (0.70 CPC Model Number CPC15UT1 CPC15UT2 CPC30UT1 CPC30UT2 CPC60UT1 CPC60UT2 +5 +5 +5 +5 +5 +5 V V V V V V A A A A A A pk) pk) pk) pk) pk) pk) pk) pk) pk) pk) pk) pk) -12 -15 -12 -15 -12 -15 V V V V V V A A A A A A pk) pk) pk) pk) pk) pk) • Notes 1. Isolated from 2 & 3. 2. Linear regulated.. 3. The specified output currents are available for a maximum duration of 10 s if the average current level is below rating and the total power is below rating for the unit. Outputs 2 & 3 may be loaded to 80% of their rated current when +5 V is not loaded. ‘FG’ terminal should be used as AC input earth. It is isolated from the DC output. 4. Mating input & output connectors are available. Example: order as CPC30 CON KIT for 30 watt models. 5. Loom kit option: comprising of 2 x 300 mm length cable looms, one terminated with a mating connector for input and the other for output terminals. 6. Cover option: wrap around chassis & safety cover supplied as a kit or fitted. Triple Output Switchers 15-60 Watts CPC Series Operating Characteristics Mechanical Details - 15 Watt Models PCB Version Covered Version Fuse Rating 250 V T2 A Supplied as cover kit (not fitted). Order as CPC15/COVER KIT Supplied fitted use suffix C e.g. CPC15UT1-C Mating Connector (Terminal) I/O Connector CN1 CN2 B3P5-VH B8B-XH-A VHR-5N (SVH-21T-1.1 or SVH-21-P1.1) XHP-8 (BXH-001T-P0.6 or SXH-001T-P0.6) Mfr: JST PIN ASSIGNMENT CN1 CN2 Pin No. 1 2 3 4 5 Input AC(L) AC(N) FG Pin No. 1 2 3 4 5 6 7 8 Input V1 V1 G1 G1 V2 G2 G2 V3 NOTES: 2 A per pin maximum for CN2 Weight: 150g or less Tolerance: +1 Dimensions in mm PWB Material: Glass composite (CEM3) www.xpplc.com sales@xpplc.com Mechanical Details - 30 Watt Models PCB Version Covered Version Fuse Rating 250 V T3 A Supplied as cover kit (not fitted). Order as CPC30/COVER KIT Supplied fitted use suffix C e.g. CPC30UT1-C PIN ASSIGNMENT CN1 CN2 I/O Connector CN1 CN2 B3P5-VH B6P-VH Mating Connector (Terminal) Pin No. 1 2 3 4 5 Input AC(L) AC(N) FG Pin No. 1 2 3 4 5 6 Input V3 G2 G2 V2 G1 V1 VHR-5N (SVH-21T-1.1 or SVH-21-P1.1) VHR-6N (SVH-21T-1.1 or SVH-21T-P1.1)) Mfr: JST NOTES: 2 A per pin maximum for CN2 Weight: 220g or less Tolerance: +1 Dimensions in mm PWB Material: Glass composite (CEM3) Mechanical Details - 60 Watt Models PCB Version Covered Version Fuse Rating 250 V T3 A Supplied as cover kit (not fitted). Order as CPC60/COVER KIT Supplied fitted use suffix C e.g. CPC60UT1-C PIN ASSIGNMENT CN1 CN2 I/O Connector CN1 CN2 B3P5-VH B8P-VH Mating Connector (Terminal) Pin No. 1 2 3 4 5 Input AC(L) AC(N) FG Pin No. 1 2 3 4 5 6 7 8 Input V3 G2 G2 V2 G1 G1 V1 V1 VHR-5N (SVH-21T-1.1 or SVH-21-T-P1.1) VHR-8N(SVH-21T-1.1 or SVH-21T-P1.1) Mfr: JST NOTES: 5 A per pin maximum for CN2 Weight: 300g or less Tolerance: +1 Dimensions in mm PWB Material: Glass composite (CEM3) www.xpplc.com sales@xpplc.com AC-DC Power Supplies LOOM KITS CPC Triple Output Switchers 15-60 Watts CPC Series Loom Kit - 15 Watt Models Input Connector 1 2 3 4 5 Output Connector 1 2 3 4 5 6 7 8 11.81” (300 mm) M Pin No. 1 2 3 4 5 Wire Gauge 0.5 mm 0.5 mm 0.5 mm Colour Brown Blue Grn/Yel Input L N E Order as CPC 15 Loom KT Pin No. 1&2 3&4 5 6&7 8 Colour Red Black Yellow Black Grey M Loom Kit - 30 Watt Models Input Connector 1 2 3 4 5 M Pin No. 1 2 3 4 5 Wire Gauge 0.5 mm 0.5 mm 0.5 mm Colour Brown Blue Grn/Yel Input L N E Order as CPC 30 Loom KT Pin No. 1 2&3 4 5 6 Wire Gauge 0.5 mm 0.5 mm 0.5 mm 0.5 mm 0.5 mm Colour Grey Black Yellow Black Red M Loom Kit - 60 Watt Models Input Connector 1 2 3 4 5 M Pin No. 1 2 3 4 5 Wire Gauge 0.5 mm 0.5 mm 0.5 mm Colour Brown Blue Grn/Yel Input L N E Order as CPC 60 Loom KT Pin No. 1&2 2&3 4 5&6 7&8 Wire Gauge 0.5 mm 0.5 mm 0.5 mm 0.5 mm 0.5 mm Colour Grey Black Yellow Black Red M M M M 11.81” (300 mm) Wire Gauge 22 AWG 22 AWG 22 AWG 22 AWG 22 AWG M Output V1 G1 V2 G2 V3 Output Connector 1 2 3 4 5 6 11.81” (300 mm) 11.81” (300 mm) M Output V3 G2 V2 G1 V1 Output Connector 1 2 3 4 5 6 7 8 11.81” (300 mm) 11.81” (300mm) M Output V3 G2 V2 G1 V1 www.xpplc.com sales@xpplc.com Rev 2.0