DTE2024S24-D

DTE20 Series DC-DC Converter XP Power 20 Watts • Regulated single outputs from 24VDC to 48VDC xxx Series • Wide 4:1 input range • Fully encapsulated chassis mount • Optional DIN rail version • IEC/UL/cUL62368-1 safety approvals • EN55032 class A with no external components • Remote on/off • 2.5kVDC isolation • -40°C to +95°C operating temperature • Full power to 80°C Dimensions: • MTBF 750kHrs (MIL-DHBK-27F, +25°C GB) DTE20: 3.78 x 2.13 x 0.92” (96.0 x 54.0 x 23.3 mm) • 3 year warranty Available in two wide (4:1) input ranges for nominal 24VDC and 48VDC, the DTE20 series of encapsulated 20W DC-DC converters are chassis mount as standard or can be ordered with a DIN rail mount. They have screw terminals for ease of connection and an LED provides clear ‘power good’ indication. Remote On/Off is standard and when inhibited the standby current is just 3mA. Isolation is 2.5kVDC input/output providing excellent separation between supply and load. The modules are fully protected against input undervoltage, short circuit and overload conditions. These features, along with a rugged design and wide operating temperature range make the DTE20 series suitable for a variety of commercial and industrial applications. Models & Ratings Input Voltage Output Voltage Output Current 5.1 V 12.0 V 24.0 V 48.0 V 5.1 V 12.0 V 24.0 V 48.0 V 24 V (9-36 V) 48 V (18-75 V) 4.0 1.67 0.835 0.42 4.0 1.67 0.835 0.42 A A A A A A A A Input Current(1,4) No Load Full Load 70 mA 70 mA 70 mA 70 mA 35 mA 35 mA 35 mA 35 mA 0.94 0.92 0.92 0.94 0.47 0.46 0.46 0.47 A A A A A A A A Maximum Capacitive Load Efficiency(2) Model Number(3) 6800 1160 300 75 6800 1160 300 75 90% 91% 91% 89% 90% 91% 91% 89% DTE2024S5V1 DTE2024S12 DTE2024S24 DTE2024S48 DTE2048S5V1 DTE2048S12 DTE2048S24 DTE2048S48 μF μF μF μF μF μF μF μF Notes 1. Input current measured at nominal input voltage. 2. Typical values. 3. For optional version fitted with Din Clip add suffix ‘-D’ e.g. DTE2024S24-D. 4. Input current is typically 3 mA at nominal input voltage when output is remotely turned off. Mechanical Details 2.99 (76.0) 0.39 (10.0) 4 x ø3.5 0.92 (23.3) 8 7 6 Top View 5 4 3 2 1 1.81 (46.0) 2.13 (54.0) 0.20 0.66 (5.0) (16.8) -D Version DCON Pin Connections Function Remote On/Off -Vin +Vin No Connection -Vout No Connection +Vout No Connection Notes DC ON Indicator 2.99 (76.0) 3.39 (86.0) 0.39 (10.0) 0.92 (23.3) 0.20 (5.0) 0.66 (16.8) 3.78 (96.0) 0.12 0.43 (3.0) (11.0) 1 Pin 1 2 3 4 5 6 7 8 www.xppower.com 1. All dimensions are in inches (mm) 2. Weight: 0.214 lbs (107 g) approx 3. Weight for -D version: 0.332 lbs (166 g) approx 4. Terminal wire size 1.5 mm2 max 5. Screw terminal torque 4.5 to 6.2 lb-in (0.5 to 0.7 Nm) 6. Case tolerance: ±0.02 (±0.5) DTE20 Series DC-DC Converter XP Power Input Characteristic Input Voltage Range Maximum Units Notes & Conditions 9 36 VDC 24 V nominal 18 75 VDC 48 V nominal Typical Minimum See Models and Ratings table Input Current A Inrush Current Input Filter Undervoltage Lockout Pi type 24 V models On at >9 V. Off 18 V. Off