DTE6048S12-D

DTE60 Series DC-DC Converter XP Power 60 Watts •Regulated single outputs from 24VDC to 48VDC xxx Series •Wide 4:1 input range •Fully encapsulated chassis mount •Optional DIN rail version •IEC/UL/cUL62368-1 safety approvals •EN55032 class A with no external components •Remote on/off •2.5kVDC isolation •-40°C to +95°C operating temperature •Full power to 75°C Dimensions: •MTBF 750kHrs (MIL-DHBK-27F, +25°C GB) DTE60: 4.41 x 2.67 x 1.5” (112 x 67.8 x 38 mm) •3 year warranty Available in two wide (4:1) input ranges for nominal 24VDC and 48VDC, the DTE60 series of encapsulated 60W DC-DC converters are chassis mount as standard or can be ordered with a DIN rail mount. They have screw terminals for ease of connection and an LED provides clear ‘power good’ indication. Remote On/Off is standard and when inhibited the standby current is just 3mA. Isolation is 2.5kVDC input/output providing excellent separation between supply and load. The modules are fully protected against input undervoltage, short circuit and overload conditions. These features, along with a rugged design and wide operating temperature range make the DTE60 series suitable for a variety of commercial and industrial applications. Models & Ratings Input Voltage Output Voltage 5.1 V 12.0 V 24.0 V 48.0 V 5.1 V 12.0 V 24.0 V 48.0 V 24 V (9-36 V) 48 V (18-75 V) Input Current(1,4) No Load Full Load Output Current 12.0 5.0 2.5 1.25 12.0 5.0 2.5 1.25 A A A A A A A A 100 mA 100 mA 110 mA 60 mA 40 mA 60 mA 60 mA 50 mA 2.83 2.75 2.75 2.75 1.40 1.36 1.37 1.37 Maximum Capacitive Load A A A A A A A A 20,400 3540 890 220 20,400 3540 890 220 μF μF μF μF μF μF μF μF Efficiency(2) Model Number(3) 90% 91% 91% 91% 91% 92% 91% 91% DTE6024S5V1 DTE6024S12 DTE6024S24 DTE6024S48 DTE6048S5V1 DTE6048S12 DTE6048S24 DTE6048S48 Notes 1. Input current measured at nominal input voltage. 2. Typical values. 3. For optional version fitted with Din Clip add suffix ‘-D’ e.g. DTE6024S24-D. 4. Input current is typically 3 mA at nominal input voltage when output is remotely turned off. Mechanical Details 3.54 (90.0) 0.43 (11.0) 1.50 (38.0) 4 x ø3.5 8 7 6 Top View 5 Indication LED 4 DCON 3 2 1 1.97 (50.0) 2.67 (67.8) 0.66 (16.8) -D Version 3.54 (90.0) Power “Good” Indicator 0.20 (5.0) 0.43 (11.0) 0.20 (5.0) 3.94 (100.0) 0.66 (16.8) 0.12 (3.0) 0.43 (11.0) www.xppower.com Pin Connections Function Remote On/Off -Vin +Vin No Connection +Vout No Connection -Vout No Connection Notes 1.50 (38.0) 4.41 (112.0) 1 Pin 1 2 3 4 5 6 7 8 1. All dimensions are in inches (mm) 2. Weight: 0.6 lbs (300 g) approx 3. Weight for -D version: 0.706 lbs (353 g) approx 4. Terminal wire size 1.5 mm2 max 5. Screw terminal torque 4.5 to 6.2 lb-in (0.5 to 0.7 Nm) 6. Case tolerance: ±0.02 (±0.5) DTE60 Series DC-DC Converter XP Power Input Characteristic Input Voltage Range Maximum Units Notes & Conditions 9 36 VDC 24 V nominal 18 75 VDC 48 V nominal Minimum Typical See Models and Ratings table Input Current A Inrush Current Input Filter Undervoltage Lockout Pi type 24 V models On at >9 V. Off 18 V. Off