E60

E Series 3W DC-HVDC CONVERTER CONVECTION COOLED The E Series is a broad line of small, component level high voltage converters in a PCB mount package that provides up 3 Watts continuous output power for models up to 7kV (2 Watts for models >7kV). These HV converters feature low ripple and noise, and low EMI/ RFI by utilizing a quasi-sinewave oscillator, excellent filtering techniques and a fully enclosed pot-core transformer. The output voltage is directly proportional to the input voltage and is linear from approximately 0.7 volts to maximum input. The galvanically isolated output allows for user selectable output polarity. Dual output models with a center-tap pin provide both positive and negative outputs from one module. Some models are provided with an external aluminum box for increased EMI/RFI shielding and rugged mounting. Proven design techniques, classic topology and custom encapsulation Typical Applications formula come together to provide engineers with a clean, reliable, low cost, and easy to integrate high voltage solution. Features • Mass Spectrometry • Electrostatic Chucks • Output Voltages from 100V to 12kV • Electrophoresis • Capacitor Charging • Output Voltage Proportional to Input • Particle Counter • Low Turn-on Voltage 0.7VDC • Ignition/Spark • Input to Output Isolation • Sustaining Ion Pumps • Dual Output Dimensions • No Minimum Load • 3 Year Warranty 2.50 x 1.5 x 0.85" (63.5 x 38.1 x 21.6mm) Block Diagram (+) In 3 1 + (-) In 2 RECTIFIER & MULTIPLIER OSCILLATOR Transformer 5 4 (+) Output Center Tap (for Dual Output option) (-) Output E Series DC-HVDC CONVERTER Input Characteristic Minimum Typical Units Notes & Conditions See Models & Ratings table 12, 15 VDC Input Current, Full Load 175 mA Input Current, No Load 400 mA Maximum Units Notes & Conditions 12000 VDC See Models & Ratings table 30 mA See Models & Ratings table % At Max Vout, Full Load Input Voltage Range 0.7 Maximum Output Characteristic Minimum Typical Output Voltage Output Current ±5 Output Voltage Tolerance Minimum Load No minimum load required Regulation Unregulated, Output is proportional to Input. See Application Notes Ripple and Noise 0.05 1.5 10 Response Time % See Models & Ratings table msec 0 to Max Vout, Full Load Maximum Units Notes & Conditions Environmental Characteristic Minimum Typical Operating Temperature (case) -10 +60 °C Models E01 to E60 Operating Temperature (case) -10 +50 °C Models E70 to E121 -25 +90 °C 95 %RH Non-condensing Maximum Units Notes & Conditions Isolation: Input to Output 3500 V