ECL25US12

AC-DC 25 Watts ECL25 Series • • • • • • • Ultra Compact Size Low Cost xppower.com Single Outputs from 3.3 to 48 V PCB Mount & Open Frame Encapsulated PCB Mount Class II Peak Load Capability Specification Input Input Voltage Input Frequency Input Current Inrush Current Earth Leakage Current Input Protection • • • • • • 85-264 VAC (120-370 VDC) 47-63 Hz 0.4 A rms at 230 VAC 20 A at 115 VAC, 40 A at 230 VAC, Class II construction no earth Internal 2 A fuse General Efficiency Isolation Switching Frequency Power Density MTBF • • • • • See tables 3000 VAC Input to Output 70 kHz typical 5.6 W/In3 (PCB Mount version) >400 kHrs per MIL-HDBK-217F Environmental Operating Temperature • -20 °C to +70 °C, derate linearly from 100% at +50 °C to 50% at +70 °C Cooling • Convection-cooled Operating Humidity • 95% RH, non-condensing Storage Temperature • -40 °C to +85 °C Operating Altitude • 3000 m Vibration • 2 g, 10 Hz to 500 kHz, 10 mins/cycle, 60 mins each cycle Output Output Voltage Output Voltage Trim Initial Set Accuracy Minimum Load Start Up Delay Start Up Rise Time Hold Up Time Line Regulation Load Regulation Transient Response Ripple & Noise • • • • • • • • • • • See tables ±5% (not encapsulated units) ±1% No minimum load required 2 s max 14 ms max 16 ms typical at full load & 115 VAC ±0.5% max ±1% max 4% max deviation, recovery to within 1% in 500 µs for a 25% load change 3.3-5 V versions: 50 mV pk-pk, 12-15 V versions: 120 mV pk-pk, 24-48 V versions: 200 mV pk-pk, 20 MHz BW 115-135% Vnom, recycle input to reset 120-170% Trip and restart (Hiccup mode) 0.05%/°C EMC & Safety Emissions Harmonic Currents ESD Immunity Radiated Immunity EFT/Burst Surge Conducted Immunity Magnetic Fields Dips & Interruptions • • • • • • • • • EN55022, level B conducted & radiated EN61000-3-2, EN61000-3-3 EN61000-4-2, level 3 Perf Criteria A EN61000-4-3, 10 V/m 80% mod Perf Criteria A EN61000-4-4, level 3 Perf Criteria A EN61000-4-5, level 3 Perf Criteria A EN61000-4-6, 10 Vrms Perf Criteria A EN61000-4-8, 10 A/m Perf Criteria A EN61000-4-11, 70% UT for 10 ms, 40% UT for 100 ms,