ECP225PS12

AC-DC 225 Watts xppower.com ECP Series • Low 1”Profile with 2.5”x 5” Footprint • 150/225 W Convection/ Forced-cooled • High Efficiency - up to 95% • Medical & ITE Approvals • Built-in Fan Supply • 0.95 at full load Earth Leakage Current • 145 W • EN61000-3-3 • EN61000-4-2, ±8 kV air, ±4 kV contact, Perf Criteria A • EN61000-4-3, 3 V/m, Perf Criteria A • EN61000-4-4, level 3, Perf Criteria A • EN61000-4-5, installation class 3, Perf Criteria A • EN61000-4-6, 3 V, Perf Criteria A • EN55035, 100% 10 ms, 30%, 500 ms, 100%, 5000 ms Perf Criteria A, A, B for high line, A, B, B for low line at full load, EN60601-1-2, 30% 500 ms, 60% 100 ms, 100% 10 ms, 100% 5000 ms, Perf Criteria A, A, A, B for high line, A, B, A, B for low line at full load • UL62368-1, IEC62368-1, EN62368-1, ANSI/AAMI ES 60601-1, IEC60601-1, EN60601-1, CE & UKCA meets all applicable directives & legislation. Output Current Convection-cooled Forced-cooled(1) Ripple and Noise pk-pk(2) Fan Output Efficiency(3) Model Number(4) 12.0 V 12.50 A 18.75 A 120 mV 12 V/0.5 A 93% ECP225PS12 Output Voltage 15.0 V 10.00 A 15.00 A 150 mV 12 V/0.5 A 93% ECP225PS15 24.0 V 6.25 A 9.38 A 240 mV 12 V/0.5 A 94% ECP225PS24 28.0 V 5.36 A 8.04 A 280 mV 12 V/0.5 A 94% ECP225PS28 48.0 V 3.10 A 4.69 A 480 mV 12 V/0.5 A 94% ECP225PS48 Notes 1. Requires 10 CFM. 2. Measured with 20 MHz bandwidth and 10 μF electrolytic capacitor in parallel with 0.1 μF ceramic capacitor 3. Minimum average efficiencies measured at 25%, 50%, 75% & 100% of 225 W load and 230 VAC input. 4. 3” x 5” Footprint available for OEM quantities, add suffix ‘-3X5’to part eg. ECP225PS24-3X5. 5. To meet Level B radiated, a torroid is required on output load leads. Use King Core type K5B RC 25*12*15 for all models except 28V which requires type K5B T 16.5*13*8.2. Mechanical Details CN1 - Input Connector Pin 1 Neutral Pin 2 Not Fitted Pin 3 Line 5.00 (127.0) 4.75 (120.6) 0.25 (6.35) Faston ground tab Mates with JST housing VHR-3N and JST Series SVH-21T-P1.1 crimp terminals Mounting holes marked with must be connected to safety earth 8 2.25 (57.1) CN2 - Output Connector Pin 1 -Vout Pin 2 -Vout Pin 3 -Vout Pin 4 -Vout Pin 5 +Vout Pin 6 +Vout Pin 7 +Vout Pin 8 +Vout VR CN2 2.50 (63.5) 3 CN1 1 1 2 1 0.134 (Ø3.4 ±0.3) Mates with JST housing VHR-8N and JST Series SVH-21T-P1.1 crimp terminals CN3 Mounting Screw Holes 4 Places 0.06 (1.60) 0.83 1.00 (21.0) (25.4) CN3 - Fan Connector Pin 1 Fan - Pin 2 Fan + Mates with Molex housing 22-01-1022 and 2759 crimp terminals 0.11 (2.80) Notes 1. All dimensions shown in inches (mm). Tolerance: ±0.02 (0.5) 2. Weight: 0.51 lbs (230 g) approx. 3. Non earthed mounting hole on secondary side requires insulated mounting to maintain 1 MOPP secondary to ground. Derating Curve Output Power (%) 100 80 60 40 20 0 -20 -10 0 10 20 30 40 50 60 70 80 Ambient Temperature (ºC) 20 July 2022 AC-DC ECP225 Models and Ratings