EML30US09-P

EML30 Series AC-DC Power Supplies XP Power 30 Watts • Compact Size • Medical Approvals • Single Outputs from 3.3 to 48 V • PCB Mount, Open Frame & Chassis Mount • Encapsulated PCB & Chassis Mount • Class II • Peak Load Capability • 3 Year Warranty Dimensions: The EML30 is a series of open frame and encapsulated AC-DC single output power supplies designed for medical applications. The series provides a number of flexible mechanical options including PCB mount, open frame, chassis mount with screw terminals and a DIN Rail option. With approvals to world-wide medical safety standards, compliance with class B for both conducted and radiated emissions and a 130%, 30s peak load capability, these class II isolation parts benefit system designers with easy integration into the latest healthcare products and applications. EML30: (-P ): 2.96 x 1.36 x 1.05” (75.2 x 34.6 x 26.7 mm) (-T ): 3.46 x 1.36 x 1.00” (87.9 x 34.6 x 25.4 mm) (-E ): 3.10 x 1.50 x 1.10” (78.7 x 38.1 x 27.9 mm) (-S): 3.78 x 1.57 x 1.12” (96.0 x 40.0 x 28.5 mm) Models & Ratings Output Power Output Voltage Output Current Nominal Peak (1) Model Number (2,3) 20 W 3.3 VDC 6.00 A 7.80 A EML30US03 30 W 5.0 VDC 6.00 A 7.80 A EML30US05 30 W 9.0 VDC 3.33 A 4.33 A EML30US09 30 W 12.0 VDC 2.50 A 3.25 A EML30US12 30 W 15.0 VDC 2.00 A 2.60 A EML30US15 30 W 24.0 VDC 1.25 A 1.63 A EML30US24 30 W 36.0 VDC 0.83 A 1.08 A EML30US36 30 W 48.0 VDC 0.62 A 0.81 A EML30US48 Notes 1. Peak load lasting 400 kHrs MIL-HDBK-217F, +25 °C GB 0.13 (60) lb (g) Open frame versions 0.35 (160) lb (g Encapsulated version 0.37 (170) lb (g Screw terminal version Notes & Conditions Environmental Characteristic Maximum Units Operating Temperature Minimum -20 Typical +70 °C Storage Temperature -40 +85 °C 95 %RH 3048 m Cooling Humidity Operating Altitude Derate linearly from 100% at +50 °C to 50% at +70 °C Convection-cooled Shock IEC68-2-27, 30 g, 11 ms half sine, 3 times in each of 6 axes Vibration IEC68-2-6, 2 g, 10 Hz to 500 kHz, 10 mins/cycle, 60 mins each cycle www.xppower.com Non-condensing 2 EML30 Series AC-DC Power Supplies EMC: Emissions Phenomenon Standard Test Level Conducted EN55032/11 Class B Radiated EN55032/11 Class B Harmonic Current EN61000-3-2 Voltage Flicker EN61000-3-3 Criteria Notes & Conditions Class A EMC: Immunity Phenomenon Test Level Criteria ESD EN61000-4-2 Standard 4 A Radiated EN61000-4-3 10 V/m A EFT EN61000-4-4 3 A Surges EN61000-4-5 3 A Conducted EN61000-4-6 10 Vrms A Magnetic Fields EN61000-4-8 30 A/m A EN60601-1-2 Acc. IEC60601-1-2 4th Ed. A 70% UT for 500 ms Dips and Interruptions Notes & Conditions 0% UT for 20 ms A 0% UT for 5000 ms B Safety Approvals 3 Safety Agency Safety Standard Notes & Conditions CB Report IEC60601-1 Ed 3 Including Risk Management Medical UL ANSI/AAMI ES60601-1:2005 & CSA C22.2, No.60601-1:08 Medical TUV EN60601-1/A11:2011 Medical CE Meets all applicable directives UKCA Meets all applicable legislation Means of Protection Category Primary to Secondary 2 x MOPP (Means of Patient Protection) IEC60601-1 Ed 3 www.xppower.com XP Power EML30 Series AC-DC Power Supplies XP Power Mechanical Details Open Frame - PCB Mount (-P) Encapsulated (-E) ACN 0.59 (15.0) 1.36 (34.6) 1.18 (30.0) 0.09 (2.29) 3.10 (78.7) 0.125 (3.2) ACN -Vo ACL VR 2.85 (72.4) -Vo 0.16 (4.1) +Vo 0.055 (1.40) 0.59 (15.0) TOP VIEW 1.18 (30.0) +Vo ACL 0.09 (2.29) 2.85 (72.4) 2.96 (75.2) 0.15 (3.8) 0.17 (4.4) 1.50 (38.1) 1.10 (27.9) 1.05 (26.7) 4x ø 0.039 (ø1.0) 0.039 (1.0) 0.39 (10.0) 0.07 (1.8) Open Frame - Chassis Mount (-T) Screw Terminal (-S) 3.43 (87.0) 15 (3.81) 3.46 (87.9) 3.2 (81.28) 4- 0.15 ( 3.8) 0.125 (3.2) TOP VIEW ACN 1.36 (34.6) Pin 1 Pin 2 -Vout 1.1 Pin 3 Output (27.9) Pin 4 0.13 Pin 5 +Vout (3.3) Pin 6 Input Pin 3 : ACN Pin 2 : NC Pin 1 : ACL See Note 4 Below ACL 1.57 (40.0) 0.39 (10.0) 00 .4) -Vo 0.84 (21.3) 1.20 +Vo (30.5) 3.01 (76.4) VR 0.88 (22.4) 0.12 max 1.0 (3.0) (25.4) 4x ø0.14 (4x ø3.5) 0.44 (11.2) 1º 1.12 (28.5) 0.27 (6.8) 0.10 (2.5) 3.78 (96.0) Optional DIN clip Notes 1. Dimensions in inches (mm). 2. Weight: P Version: 0.13 lbs (60 g) T Version: 0.13 lbs (60 g) E Version: 0.35 lbs (160 g) S Version: 0.37 lbs (170 g) 3. Tolerances: x.xx = ± 0.02 (x.x = ± 0.5) x.xxx = ± 0.01 (x.xx = ± 0.25) 4. Heatsink is only fitted to 3V3, 5V and 9V models Mating Connectors (-T version only) Input Connector: JST XHP-3 Output Connector: JST XHP-6 Crimps: SPH-002T-P0.5S Cable harness with 300mm wire available, order part no. ECL25 LOOM KIT www.xppower.com 17 Sept 2021