F50

F Series 10W DC-HVDC CONVERTER The F Series is a broad line of robust, field-proven DC to HV DC converters which deliver 10 Watts continuous output power. Outputs range from 100V to 12kV. The input and output are galvanically isolated so a unit can be used to deliver a positive or negative high voltage output. The output voltage is proportional to input voltage with a low 0.7V typical turn-on voltage. The F Series employs a qμasi-sinewave oscillator, a fully enclosed transformer, input and output filtering, and a 5-sided metal enclosure. As a result, these modules exhibit very low EMI/RFI, noise and ripple. A dual output option has a center-tap pin which, when grounded provides both positive and negative outputs from one compact module. Typical Applications Features • Mass Spectrometry • Electrostatic Chucks • Output Voltages from 100V to 12kV • Electrophoresis • Output Voltage Proportional to Input • Capacitor Charging • Particle Counter • Low Turn-on Voltage 0.7VDC • Isolation Testing • Input to Output Isolation • Medical Laser Treatment • Dual Output Option • Arc & Short Circuit Protected Dimensions • No Minimum Load 2.80 x 1.70 x 0.85" (71.1 x 43.2 x 21.6mm) • 3 Year Warranty Block Diagram (+) In 1 3 (+) Output RECTIFIER & MULTIPLIER OSCILLATOR (-) In 2 5 Center tap (for Dual output opon) 4 Transformer (-) Output F Series DC-HVDC CONVERTER Input Characteristic Minimum Typical Units Notes & Conditions See Models & Ratings table 12, 15 VDC Input Current, No Load 500 mA Input Current, Full Load 1.5 A Maximum Units Notes & Conditions 12 000 VDC See Models & Ratings table 100 mA See Models & Ratings table % At Max Vout, Full Load Input Voltage Range 0.7 Maximum Output Characteristic Minimum Typical Output Voltage Output Current ±5 Output Voltage Tolerance Minimum Load No minimum load required Regulation Unregulated, Output is proportional to Input. See Application Notes Short Circuit Protection Protected against short circuit conditions indefinitely Ripple and Noise 0.1 Response Time 2.5 % 1See Models & Ratings table 260 msec 0 to Max Vout, Full Load Notes & Conditions General Maximum Units Isolation: Input to Output Characteristic 3500 V