FCS60US24

FCS60 Series AC-DC Power Supplies XP Power 60 Watts • 60 W Convection Rating • 2” by 4” Footprint • Low 1.04” Profile • High Efficiency • Medical, ITE and Household Appliance Approvals • Class I & Class II Installations • High Power Density • Less than 0.3 W No Load Input Power • 3 Year Warranty Dimensions: The FCS60 series is designed to minimize the no load power consumption and maximize efficiency to facilitate equipment design to meet the latest environmental legislation. Approved for medical and FCS60: ITE applications in either Class I or Class II installations, this range of single output AC-DC power supplies 2.00 x 4.00 x 1.04” (50.8 x 101.6 x 26.4 mm) are packaged in a low profile 1.04” height with a foot print of just 2” by 4”. The FCS60 provides up to 60W convection-cooled and operates down to 80 VAC. The power supply features two AC line fuses and low leakage currents required by medical applications. The low profile, low noise and safety approvals covering ITE and medical standards allows the versatile FCS60 series to be used in a wide range of applications. Models & Ratings Output Power 60 W 60 W 60 W 60 W 60 W 60 W Output Voltage 12.0 V 15.0 V 18.0 V 24.0 V 36.0 V 48.0 V Output Current 5.00 A 4.00 A 3.33 A 2.50 A 1.67 A 1.25 A Efficiency(1) 85% 85% 85% 85% 86% 86% Model Number FCS60US12 FCS60US15 FCS60US18 FCS60US24 FCS60US36 FCS60US48 Notes 1. Typical efficiency measured at full load and 230 VAC input. Mechanical Details 4.0 (101.60) 3.75 (95.24) ø0.134 (ø3.4) thru in 4 positions CON 1 Neutral 2 Line 1 2.0 (50.8) CON 2 1 2 +VE -VE CN1 - Input Connector Pin 1 Line Pin 2 Not Fitted Pin 3 Neutral Mates with JST housing VHR-3N and JST Series SVH-21T-P1.1 crimp terminals Output Voltage Adjustment 1.75 (44.4) Mounting hole marked with must be connected to safety earth for class I applications 0.125 (3.17) 0.125 (3.17) CN2 - Output Connector 0.92 (23.4) Notes +Vout Pin 2 -Vout Mates with JST housing VHR-2N and JST Series SVH-21T-P1.1 crimp terminals 0.12 (3.0) 1. All dimensions shown in inches (mm). Tolerance: ±0.02 (0.5) 1 1.04 (26.4) Pin 1 2. Weight: 0.25 lbs (112 g) approx. www.xppower.com FCS60 Series AC-DC Power Supplies XP Power Summary Characteristic Minimum Input Range 80 Typical 115/230 No Load Input Power 264 0.3 Efficiency 85 Operating Temperature Safety Approvals Maximum Units Notes & Conditions VAC Derate output from 100% at 90 VAC to 90% at 85 VAC and 80% at 80 VAC W % 230 VAC (see models and ratings table) ITE Medical -25 +70 °C See derating curve (fig.1) IEC60950-1, IEC62368-1, EN62368-1, cUL62368-1 IEC60601-1 Ed 3.1 Including Risk Management, ANSI/AAMI ES60601-1 & CSA C22.2 No.6061-1:08, EN60601-1 Household IEC60335-1 CE Meets all applicable directives UKCA Meets all applicable legislation Input Characteristic Minimum Typical Maximum Units Notes & Conditions Derate output from 100% at 90 VAC to 90% at 85 VAC and 80% at 80 VAC Input Voltage - Operating 80 115/230 264 VAC Input Frequency 47 50/60 63 Hz Power Factor EN61000-3-2 class A Input Current - Full Load 0.9/0.5 A 115/230 VAC 264 VAC cold start, 25 ºC 264 VAC/60 Hz Inrush Current 60 A Earth Leakage Current 270 μA 0.3 W No load Input Power Input Protection Agency approval, 47-63 Hz T3.15 A/250 A, 250 V Internal fuse fitted in line and neutral. Output - Main Output Characteristic Minimum Output Voltage 12 Typical Initial Set Accuracy Output Voltage Adjustment Minimum Load Units Notes & Conditions 48 VDC See Models and Ratings table ±1 % ±10 A 1 Output Rise Time 50% load, 115/230 VAC % 0 Start Up Delay Hold Up Time Maximum 2 50 No minimum load required s ms 8.3/20 ms Min at full load 115/230 VAC Line Regulation ±0.5 % 90-264 VAC Load Regulation 1 % 0-100% load. Transient Response 4 % Recovery within 1% in less than 500 μs for a 50-75% and 75-50% load step Over/Undershoot 5 % Full load Ripple & Noise 1.0 % pk-pk 20 MHz bandwidth Overvoltage Protection 115 140 %Vnom Continuous trip and restart (hiccup) Overload Protection 110 160 % I nom 0.05 %/˚C Maximum Units Short Circuit Protection Continuous trip and restart (hiccup) Temperature Coefficient General Characteristic Minimum Efficiency Isolation: Input to Output Input to Ground Output to Ground Typical 85 % 4000 VAC 2 MOPP 1500 VAC 1 MOPP 500 VAC 1 MOPP at output voltage Power Density Mean Time Between Failure Weight Notes & Conditions 115/230 VAC 100% load 7.2 500 W/in3 kHrs 0.25 (112) MIL-HDBK-217F, Notice 2 +25 °C GB lb(g) www.xppower.com 2 FCS60 Series AC-DC Power Supplies XP Power Environmental Characteristic Maximum Units Operating Temperature Minimum -25 +70 °C Storage Temperature -40 +85 °C 95 %RH 5000/4000 m Humidity Typical 5 Operating Altitude Notes & Conditions See derating curve, fig.1 Non-condensing ITE/Medical Shock ±3 x 30g shocks in each plane, total 18 shocks. 30g = 11ms (+/- 0.5msecs), half sine. Conforms to EN60068-2-27 Vibration Single axis 10-500 Hz at 2g sweep and endurance at resonance in all 3 planes. Conforms to EN60068-2-6 Temperature Derating Curve Figure 1 Output Load (W) 50 25 Some specification parameters may not be met 60 0 -25 -20 0 +40 +50 Ambient Temperature (ºC) +70 Notes FCS60US12 ripple and noise is