G60CT

G Series 1.5W DC-HVDC CONVERTER CONVECTION COOLED The G Series is a line of miniature high voltage converters that provide up to 6kV output, positive or negative, in a compact PCB mount package. The isolated output is directly proportional to the input, and is linear from approximately 0.7 volts in. Excellent filtering techniques and a low noise quasi-sinewave oscillator provide clean, reliable DC to HV DC conversion with low ripple and low EMI/RFI. The isolated output allows for user selectable output polarity. When the optional center-tap pin is grounded, the unit provides both positive and negative outputs from one compact, low cost module. The pin pattern used on this model has become an industry standard for high voltage modules. The G Series units are component level converters that are easy to integrate, low cost, and come with decades of field proven reliability. Typical Applications Features • Mass Spectrometry • Electrostatic Chucks • Output Voltages from 100V to 6kV • Electrophoresis • Output Voltage Proportional to Input • Capacitor Charging • Particle Counter • Low Turn-on Voltage 0.7VDC • Ignition/Spark • Input to Output Isolation • Sustaining Ion Pumps • Dual Output Models • No Minimum Load Dimensions • 3 Year Warranty 1.50 x 1.50 x 0.63" (38.1 x 38.1 x 16.0mm) Block Diagram (+) In 3 1 + (-) In 2 RECTIFIER & MULTIPLIER OSCILLATOR Transformer 5 4 (+) Output Center Tap (for Dual Output option) (-) Output G Series DC-HVDC CONVERTER Input Characteristic Minimum Input Voltage 0.7 Typical Maximum Units Notes & Conditions 12 VDC Input Current, No Load 175 mA See Models and Ratings Table. Input Current, Full Load 400 mA See Models and Ratings Table. Maximum Units Notes & Conditions 6000 VDC See Models & Ratings table 15 mA See Models & Ratings table % At Max Vout, Full Load Output Characteristic Minimum Typical Output Voltage Output Current ±3 Output Voltage Tolerance Minimum Load No minimum load required Regulation Unregulated, Output is proportional to Input. Unloaded output voltage is typically 10% higher than unloaded. Ripple and Noise 0.1 2.0 15 Response Time % See Models & Ratings table msec 0 to Max Vout, Full Load [G01 to G60] Maximum Units Notes & Conditions Environmental Characteristic Minimum Typical Operating Temperature -10 +60 °C Storage Temperature -25 +90 °C Case temperature 95 %RH Non-condensing Maximum Units Notes & Conditions 3500 V 190 kHz Natural convection Cooling Humidity General Characteristic Minimum Isolation: Input to Output Switching Frequency Construction Mean Time Between Failure 60 Typical