GP05US05

Universal AC Input Switchers 5-10 Watts GP Series • THE XPERTS IN POWER 85-264 VAC Input • Single & Dual Ouptuts • PCB Mounting • Eurocard Mounting Option • DIN Rail Mounting Option • Chassis Mounting Option • International Safety Approvals Specification Input Input Voltage Input Frequency Inrush Current • • • 85-264 VAC (110-370 VDC) 47-440 Hz 20 A typical at 100 VAC, 40 A typical at 200 VAC, (cold start & full load) Environmental Operating Temperature • 0 °C to +55 °C, derate linearly to 80% at -10 °C to 25% at +70 °C for 85-132 VAC, & 45% at +65 °C for 133-264 VAC 20-95% RH non-condensing 50 G for 11 ms, once on each X, Y & Z axis 10-55 Hz at 10 G, 3 mins period 60 mins each along each along X, Y & Z axis Humidity Shock Vibration • • • Output Hold Up Time Output Voltage Line Regulation Load Regulation Ripple & Noise Short Circuit & Overload Protection • • • • • • 10 ms at 85 VAC full load See Table, ±5% initial tolerance See Table See Table See Table Operates >105% of rating & recovers automatically EMC & Safety Safety Approvals • IEC950, EN60950, UL1950, VDE 0160, CSA 22.2 No.234 N.B. To comply with with CSA agency approval units are labelled with nominal AC input voltage & frequency FCC Curve B, VDE 0871 Curve B, & EN55022B conducted noise with addition of 0.1 µF ‘X’ capacitor fitted across AC input General Temperature Coefficient Switching Frequency Efficiency Isolation • • • • 0.02%/°C typical 250 kHz See Table 3000 VAC 1 min, 500 VDC 50 Mohm Input to Output, 2000 VAC 1 min, 500 VDC 50 Mohm Input to Case, FG 500 VAC 1 min, 500 VDC 50 Mohm Output to Case, FG EMC • • • www.xpplc.com sales@xpplc.com AC-DC Power Supplies OUTPUT VOLTAGE & CURRENT RATINGS Output Voltage 5V 12 V +12 V (24 V) +15 V (30 V) 5V 12 V +12 V (24 V) +15 V (30 V) Notes 1. Measured low line to high line. 2. Measured no load to full load. Output Current 1.00 A 0.45 A 0.22 A 0.17 A 2.00 A 0.90 A 0.45 A 0.35 A Efficiency (Typical @ 100 VAC) 65% 67% 67% 67% 70% 72% 72% 72% Regulation Line(1) Load(2) 20 mV 40 mV 40 mV 100 mV 60 mV 600 mV 75 mV 750 mV 20 mV 40 mV 48 mV 100 mV 60 mV 600 mV 75 mV 750 mV Ripple & Noise Pk-Pk 80/120 mV 120/150 mV 120/150 mV 120/150 mV 80/120 mV 120/150 mV 120/150 mV 120/150 mV GP Model Number GP05US05 GP05US12 GP05UD12 GP05UD15 GP10US05 GP10US12 GP10UD12 GP10UD15 • Universal AC Input Switchers 5-10 Watts GP Series Mechanical Details 5 W Models 10 W Models Weight: 75g max Dimension: Inches (mm) Tolerance: ±0.5 mm (1) Tolerance :±0.3 mm Weight: 100g max Dimension: Inches (mm) Tolerance: ±0.5 mm (1) Tolerance :±0.3 mm Mounting Options The GP-BOARD is designed to accept any of the GP series models, in addition it can be supplied with a DIN HOUSING for mounting on DIN rails - both top hat and G types. Order GP-BOARD(S) for single output models and GP-BOARD(D) for dual output models. 3.66 (93.0) 2.64 (67.0) 4 x 0.16 (4.0) holes, 3.35 (85.0) x 2.36 (60.0) The GP-EUROCARD (3.94 (100) x 6.31 (160) is designed to accept any combination of two GP series models to provide dual, triple and quad outputs. In addition it can be supplied with a GP-E/CARD KIT which includes 6TE front panel and plastic cover for rear of pcb. www.xpplc.com sales@xpplc.com Rev 2.0