GSP500PS12-EF

GSP500 Series AC-DC Power Supplies XP Power 500 Watts • Convection/Forced-cooled Ratings • Universal 80 - 264VAC Input • IT & Medical Safety Approvals • 95% (0 VAC), 8.3ms Dip 30% (70 VAC), 416ms A A A Dip >95% (0 VAC), 4160ms B Dip >95% (0 VAC), 10.0ms A Dip 30% (168 VAC), 500ms A Dip >95% (0 VAC), 5000ms B Dip >95% (0 VAC), 10.0ms A Dip 60% (40 VAC), 100ms A Dip 30% (70 VAC), 500ms A Dip >95% (0 VAC), 5000ms B Dip >95% (0 VAC), 10.0ms A Dip 60% (96 VAC), 100ms A Dip 30% (168 VAC), 500ms A Dip >95% (0 VAC), 5000ms B Derate Output Power to 250 W Safety Approvals Safety Certification CB Report UL EN Safety Standard Notes & Conditions IEC60950-1 & IEC62368-1 Information Technology IEC60601-1 Including Risk Management Medical UL62368-1, CSA62368-1 via cUL Information Technology ANSI/AAMI ES60601-1 & CSA C22.2, No.60601-1 Medical EN62368-1 Information Technology EN60601-1 Medical Equipment Protection Class Class I See safety agency conditions of acceptibility for details CE Meets all applicable directives UKCA Meets all applicable legislation Means of Protection Category Primary to Secondary 2 x MOPP (Means of Patient Protection) Primary to Earth 1 x MOPP (Means of Patient Protection) 55 IEC60601-1 www.xppower.com GSP500 Series AC-DC Power Supplies XP Power Mechanical Details GSP500-EF 1.30 (33.00) X 2 A A 0.20 (5.00) 5.65 (143.40) 6.71 (170.40) LOGIC CONNECTOR 0.08 (2.00) 1 3 9 10 21 0.63 (15.90) FAN CONNECTOR LED 4.00 (101.60) M4 SCREW-2X TORQUE: 10.62lbs-in(1.2Nm) Max. 1.14 (28.90) VOUT (-) 0.77 (19.45) VOUT (+) 1.93 (48.94) M3.5 SCREW 9.5mm CENTER TORQUE: 10.62lbs-in(1.2Nm) Max. N L 0.82 (20.95) 7.00 (177.79) 5.65 (143.40) 0.02 (0.50) AIRFLOW DIRECTION DETAIL A Mounting Hole 8 PLCS M3 X 0.5 0.15 (3.8) MAX Penetration Torque: 5 lb/in (0.6 Nm) A 1.65 (41.90) A 1.30 (33.00) 0.98 (24.90) 0.20 (5.00) 0.21 (5.39) 6.00 (152.40) 5.41 (137.40) X 2 A Logic Connector(3) for standard versions JST B10B-PHDSS A 4.00 (101.60) 2.36 (60.00) CL A A 0.39 (10.00)X2 Fan Connector (3) S3B-PH-KL(LF) Pin 1 2 3 Function +12 V N/C GND Notes 1. All dimensions in inches (mm). 2. Tolerance .xx = ±0.02 (0.50); .xxx = ±0.01 (0.25) 3. Fan connector mates with JST housing PHR-3 and SPH-002T-P0.5S crimp terminals or equivalent. Logic connector J301 mates with JST housing PHDR-10VS and SPHD-001T-P0.5 crimp terminals. www.xppower.com Pin 1 2 3 4 5 6 7 8 9 10 Function +Sense -Sense Power Fail No Connection No Connection No Connection +Inhibit -Inhibit +5V Standby -5V Standby Logic Connector (3) For Current Share Versions -P JST B10B-PHDSS Pin 1 2 3 4 5 6 7 8 9 10 Function +Sense -Sense Power Fail No Connection Current Share Current Share +Inhibit -Inhibit +5V Standby -5V Standby 6 GSP500 Series AC-DC Power Supplies XP Power Mechanical Details GSP500 1.30 (33.00) X2 A A 0.20 (5.00) 5.65 (143.40) LOGIC CONNECTOR 6.00 (152.40) 0.63 (15.9) X2 1 3 9 10 21 FAN CONNECTOR LED M4 SCREW-2X TORQUE: 10.62lbs-in(1.2Nm) Max. 1.14 (28.90) VOUT (-) 0.77 (19.45) 4.00 (101.60) VOUT (+) N L 5.65 (143.40) 0.02 (0.50) DETAIL A Mounting Hole 8 PLCS M3 X 0.5 0.15[3.8] MAX Penetration Torque: 5 lb/in (0.6 Nm) A 1.65 (41.90) AIRFLOW DIRECTION at 12 CFM A 1.30 (33.00) 0.98 (24.90) 0.20 (5.00) 0.21 (33.00) 6.00 (152.40) Logic Connector(3) for standard versions JST B10B-PHDSS 5.41 (137.40)X2 A Pin 1 2 3 4 5 6 7 8 9 10 A 4.00 (101.60) 2.36 (60.00) CL A A 0.39 (10.00)X2 Fan Connector (3) S3B-PH-KL(LF) Pin 1 2 3 Function +12 V N/C GND Notes 1. All dimensions in inches (mm). 2. Tolerance .xx = ±0.02 (0.50); .xxx = ±0.01 (0.25) 77 3. Fan connector mates with JST housing PHR-3 and SPH-002T-P0.5S crimp terminals or equivalent. Logic connector J301 mates with JST housing PHDR-10VS and SPHD-001T-P0.5 crimp terminals. www.xppower.com Function +Sense -Sense Power Fail No Connection No Connection No Connection +Inhibit -Inhibit +5V Standby -5V Standby Logic Connector (3) For Current Share Versions -P JST B10B-PHDSS Pin 1 2 3 4 5 6 7 8 9 10 Function +Sense -Sense Power Fail No Connection Current Share Current Share +Inhibit -Inhibit +5V Standby -5V Standby GSP500 Series AC-DC Power Supplies XP Power Thermal Considerations - GSP500PSxx Models Only In order to ensure safe operation of the PSU in the end-use equipment, the temperature of the components listed in the table below must not be exceeded. Temperature should be monitored using K type thermocouples placed on the hottest part of the component (out of direct air flow). See below for component locations. Temperature Measurements (At Ambient 50 °C) Component Max Temperature °C T1 Coil 120 ° C L3 Coil 120 ° C Q7 Body 120 ° C Q102 Body 120 ° C C20 105 ° C C102 105 ° C -- Service Life The estimated service life of the GSP500PSxx Series is determined by the cooling arrangements and load conditions experienced in the end application. Due to the uncertain nature of the end application this estimated service life is based on the actual measured temperature of a key capacitors with in the product when installed by the end application. The worst case of the two figures should be taken as the indicative service life in 24/7 operation. The graph below expresses the estimated lifetime of a given component temperature and assumes continuous operation at this temperature. Estimated Service Life vs Component Temperature 70000 Q102 Lifetime (Hrs) 60000 50000 40000 30000 C20 20000 10000 C102 Q7 0 105 95 85 75 65 55 C20 Temperature (°C) T1 350000 300000 Lifetime (Hrs) 250000 200000 L3 150000 100000 50000 0 105 95 85 75 65 55 C102 Temperature (°C) www.xppower.com 06 July 2022