IA2409D

IA Series DC-DC Converter 1 Watt • Dual output uregulated • SIP or DIP package • Industry standard pinout • 1.0kV DC isolation • Operating temperature -40°C to +85°C • MTBF >1.1MHrs • 3 year warranty The IA series of compact SIP and DIP format DC-DC converters offer a cost effective, versatile and convenient solution to many applications within electronic circuits. With functional isolation, these dual output converters can be used for example in process control, instrumentation and logic circuits. Dimensions: IA SIP: 0.76 x 0.24 x 0.40” (19.3 x 6.09 x 10.16 mm) IA DIP: 0.80 x 0.40 x 0.25” (20.32 x 10.16 x 6.35 mm) Models & Ratings Input Voltage 3.3VDC 5VDC 12VDC 24VDC Output Voltage Output Current(2) Efficiency Model Number(1) ±5.0V ±100 mA 66% IA0305S ±3.3 V ±151 mA 65% IA0503S ±5.0 V ±100 mA 74% IA0505S ±9.0 V ±55 mA 78% IA0509S ±12.0 V ±42 mA 78% IA0512S ±15.0 V ±33 mA 80% IA0515S ±24.0 V ±21 mA 80% IA0524S ±3.3 V ±151 mA 66% IA1203S ±5.0 V ±100 mA 75% IA1205S ±9.0 V ±55 mA 76% IA1209S ±12.0 V ±42 mA 78% IA1212S ±15.0 V ±33 mA 80% IA1215S ±24.0 V ±21 mA 76% IA1224S ±3.3 V ±151 mA 68% IA2403S ±5.0 V ±100 mA 74% IA2405S ±9.0 V ±55 mA 76% IA2409S ±12.0 V ±42 mA 78% IA2412S ±15.0 V ±33 mA 78% IA2415S ±24.0 V ±21 mA 78% IA2424S Notes 1. Replace ‘S’ in model number with ‘D’ for DIP package. 1 2. Outputs power-trade. www.xppower.com IA Series DC-DC Converter Input Characteristic Input Voltage Range Minimum 2.97 4.50 Typical Maximum 3.63 5.50 10.80 21.60 Units Notes & Conditions 3.3V nominal 5V nominal VDC 13.20 26.40 12V nominal 24V nominal Output Characteristic Output Voltage Set Accuracy Minimum Typical Maximum ±3.0 Units VDC % 1.2 ±10 % % Minimum Load Line Regulation Load Regulation Ripple & Noise Maximum Capacitive Load Temperature Coefficient Notes & Conditions See Models and Ratings table At full load No load wil not damage unit but may not meet all specifications For 1% Vin charge 20 to 100% (3.3 Vout ±20%) 20 MHz bandwidth. Measured using 0.47 μF ceramic capacitor. 75 mV pk-pk 100 0.02 μF %/ ˚C Maximum Units Notes & Conditions % VDC See Models and Ratings table General Characteristic Efficiency Isolation: Input to Output Isolation Resistance Isolation Capacitance Switching Frequency Mean Time Between Failure Minimum Typical 1000 109 Ω pF kHz MHrs Water Wash Pin Material Case Material 60 80 1.1 0.00507 (2.3) 0.00573 (2.6) Use de-ionized water only Alloy 42 solder coated nickel iron Non-conductive black plastic UL94V-0 Potting Material Epoxy UL94V-0 rated Solder Profile Wavesolder 260°C max. 1.5mm from case 10s max Weight Variable MIL-HDBK-217F, +25 °C GB SIP DIP lb (g) Environmental Characteristic Minimum Operating Temperature -40 Storage Temperature -40 Typical Maximum Units +85 °C +125 °C +100 °C Case Temperature Cooling Notes & Conditions Natural convection EMC: Emissions Phenomenon Standard Test Level Conducted EN55032 Class A Notes & Conditions Class B / External Components EMC: Immunity Phenomenon Test Level Criteria ESD EN61000-4-2 Standard ±8 kV air discharge, ±6 kV contact A Radiated EN61000-4-3 10 V/m A EFT/Burst EN61000-4-4 ±2 kV A With external components, see application notes Surge EN61000-4-5 ±1 kV A With external components, see application notes Conducted EN61000-4-6 10 V rms A www.xppower.com Notes & Conditions 2 IA Series DC-DC Converter Safety Approvals Safety Agency Safety Standard UL UL60950-1 & CAN/CSA C22.2 No. 60950-1 UL62368-1 & CAN/CSA C22.2 No. 62368-1 CE UKCA Notes & Conditions Meets all applicable directives Meets all applicable legislation Mechanical Details TOP VIEW 0.24 (1) (6.09) max 0.02 (0.5) FRONT VIEW 0.76 (19.30) max BOTTOM VIEW +Vin -Vin -Vout 0V +Vout 0.5 (12.70) 0.01 (0.254) max 0.055 (1.40) 0.18 (4.57) 0.12 (3.05) min 0.1 (2.54) 0.4 (10.16) max Connection +Vin -Vin No pin -Vout Common +Vout No pin 0.4 (10.16) max TOP VIEW 0.80 (20.32) max 0.02 (0.51) 0.06 (1.52) 0.11 (2.79) min 0.3 (7.62) 0.02 (0.51) NC BOTTOM VIEW +Vin 0.01 (0.254) max 0.25 (6.35) max (2) SIDE VIEW 0.11 (2.84) -Vin Pin No. 1 2 3 4 5 6 7 DIP Package DIP Package SIP Package SIP Package -Vout 0.3 (7.62) +Vout 0V 0.60 (15.24) Pin No. 1 7 8 9 10 11 14 Connection -Vin NC Common +Vout No pin -Vout +Vin Notes 1. All dimensions shown in inches (mm). 2. Weight: SIP 0.00507 lbs (2.3 g) DIP 0.00573 lbs (2.6 g) 3. Recommended hole size for pins is 0.03 (0.8) diameter. Application Notes EMI Filter Input filter components (C1, L, C2, C3) are used to help meet conducted emissions requirement for the module. These components should be mounted as close as possible to the module; and all leads should be minimized to decrease radiated noise. IA03XXX IA05XXX IA15XXX IA24XXX 1210, 1210, 1210, 1210, C1 2.2 μF/100V 2.2 μF/100V 2.2 μF/100V 2.2 μF/100V L 18μH 18μH 18μH 18μH C2 C3 1210, 2.2μF/100V 1206, 470pF/2kV Ripple & Noise Reduction - Add optional electrolytic 10μF output capacitor EFT/Surge Filter Input filter components (C1, D1) are used to help meet IEC61000-4-4 and IEC61000-4-5. SIP DIP Input 3.3V 5.0V 12.0V 15.0V 24.0V C1 = 2200μF, 100V D1 SMAJ5A SMAJ6.5A SMAJ14A SMAJ18A SMAJ26A C1 = 470μF, 100V www.xppower.com 22 March 2022