IE1212SH

xppower.com Specification • Nominal ±10% • 20 mA pk-pk through 12 μH inductor 5Hz to 20 MHz • None Output Output Voltage Minimum Load Line Regulation Load Regulation Single Unregulated Output • SIP or DIP Package • 1.0kV DC Isolation • Optional 3.0kV DC Isolation • Small Package Sizes • -40 °C to +85 °C Operation • 3 Year Warranty Input No Load Voltage(3) Input Current Input Input Voltage Range Input Reflected Ripple Current Input Reverse Voltage Protection • 3.3 VDC 5 VDC • • • • Setpoint Accuracy • Ripple & Noise • Temperature Coefficient • Maximum Capacitive • Load See table None(5) ±1.2%/1% Δ Vin ±10% for a 20-100% load change(5) (3.3 V models ±20%, 15 V model ±8%) ±3% 100 mV pk-pk max, 20 MHz bandwidth 0.02%/°C 220 μF 12 VDC 15 VDC 24 VDC General Efficiency Isolation Voltage (functional) Isolation Resistance Isolation Capacitance Switching Frequency MTBF Solder Process Pin Material Case Material • See table • 1000 VDC minimum (3000 VDC -H option) • 109 Ω • 60 pF typical • 40-150 KHz variable • >1.1 MHrs to MIL-HDBK-217F at 25 °C, GB • 260⁰C max 1.5mm from case 10s max • SIP Solder coated alloy 42, DIP solder coated brass • Non-conductive plastic UL94V-0 rated 3.3 V 5.0 V 9.0 V 12.0 V 15.0 V 24.0 V 3.3 V 5.0 V 9.0 V 12.0 V 15.0 V 24.0 V 3.3 V 5.0 V 9.0 V 12.0 V 15.0 V 24.0 V 5.0 V 3.3 V 5.0 V 9.0 V 12.0 V 15.0 V 24.0 V 300 200 111 84 66 42 300 200 111 84 66 42 300 200 111 84 66 42 200 300 200 111 84 66 42 Efficiency mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA Model Number(1,2) 71% 75% 74% 74% 77% 77% 72% 75% 77% 78% 78% 80% 72% 75% 77% 80% 78% 78% 78% 72% 75% 77% 80% 78% 80% IE0303S IE0305S IE0309S IE0312S IE0315S IE0324S IE0503S IE0505S IE0509S IE0512S IE0515S IE0524S IE1203S IE1205S IE1209S IE1212S IE1215S IE1224S IE1505S IE2403S IE2405S IE2409S IE2412S IE2415S IE2424S Notes 1. For DIP package, replace ‘S’ in model number with ‘D’. 2. Add suffix ‘-H’ to model number for 3000 VDC isolation. 3. Operation at no load will not damage unit but it may not meet all specifications. 4. All dimensions in inches (mm). 5. Pin pitch tolerance: ±0.014 (±0.35) 6. Case tolerance: ±0.02 (±0.5) 7. Weight: SIP 0.003 lbs (1.4 g), DIP 0.004 lbs (1.8 g) Mechanical Details SIP Package DIP Package 0.46 (11.68) 0.50 (12.70) 0.24 (6.00) • • • • -40°C to +85°C -40°C to +125°C 100°C max Convection-cooled Safety Safety Agency mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA Output Current (4) Environmental Operating Temperature Storage Temperature Case Temperature Cooling 25 25 30 45 40 40 25 25 25 25 25 25 16 16 16 16 16 16 9 10 10 10 10 10 10 Output Voltage • CE & UKCA meets all applicable directives 0.40 (10.14) 0.27 (6.86) 0.38 (9.65) 0.02 (0.5) 0.12 (3.00) 0.12 (3.05) 0.02 (0.5) 0.02 (0.5) 0.2 (5.1) & legislation. 0.08 (2.03) +Vout 0.30 (7.62) -Vout Bottom View -Vin +Vin -Vout +Vout 0.01 (0.25) Bottom View 0.06 (1.60) 0.01 (0.25) 0.30 (7.62) -Vin +Vin 0.30 (7.62) 24 August 2021 DC-DC 1 Watt IE Series