IF0512S

DC-DC 1 Watt IF Series xppower.com Specification • Regulated Single Output • SIP or DIP Package • Low Ripple & Noise • 1000 VDC Isolation • Optional 3000 VDC Isolation • MTBF 4.2 MHrs • 3 Year Warranty Input Voltage Input Input Voltage Range • Nominal ±10% Input Reflected Ripple Current • 20 mA pk-pk through 12 μH inductor, 5 Hz to 20 MHz Input Reverse Voltage Protection • None Output Voltage Output Current 3.3 V 5.0 V 9.0 V 12.0 V 15.0 V 3.3 V 5.0 V 9.0 V 12.0 V 15.0 V 3.3 V 5.0 V 9.0 V 12.0 V 15.0 V 5V 12 V Output Output Voltage • See table Minimum Load • None Line Regulation • ±0.5% max Load Regulation • ±0.5% max for a 10-100% load change(3) (±1.0% for 3.3 V output) Setpoint Accuracy • ±2% max Ripple & Noise • 50 mV pk-pk max, 20 MHz bandwidth Temperature Coefficient • 0.02%/°C Maximum Capacitive Load 24 V (3) SIP Package Isolation Voltage • 1000 VDC standard, 3000 VDC option(2) Isolation Resistance • 1000 MΩ min Isolation Capacitance • 60 pF typical Switching Frequency • 36-150 kHz variable MTBF • 4.2 MHrs to MIL-HDBK-217F at 25 °C, GB 0.28 (7.20) 0.39 (10.00) 0.01 (0.25) 1 2 4 5 6 0.28 (7.20) 7 0.02 (0.50) 0.40 (10.16) • +100 °C max Cooling • Convection-cooled 0.30 (7.62) 1 7 14 11 0.30 (7.62) 10 Standard +Vin -Vin -Vout No Pin +Vout No Pin -H’Version ‘ +Vin -Vin No Pin -Vout No Pin +Vout 0.40 (10.16 ) DIP Package Operating Temperature • -40 °C to +85 °C (no derating) Case Temperature Pin 1 2 4 5 6 7 0.80 (20.32) 0.60 (15.24) • -40 °C to +125 °C 0.08 (2.00) 0.02 (0.50) 0.10 (2.54) 0.60 (15.24) Environmental Storage Temperature IF0503S IF0505S IF0509S IF0512S IF0515S IF1203S IF1205S IF1209S IF1212S IF1215S IF2403S IF2405S IF2409S IF2412S IF2415S 0.37 (9.50) 0.12 (3.05) • See table Model Number(1,2) 57% 65% 65% 68% 68% 57% 63% 66% 68% 66% 60% 65% 68% 68% 68% 0.76 (19.50) • 220 μF Efficiency Efficiency mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA Mechanical Details General 9 0.01 (0.25) 8 0.02 (0.50) 0.12 (3.05) Pin 1 7 8 9 10 11 14 0.27 (6.85) Standard -Vin N.C. No Pin +Vout No Pin -Vout +Vin -H’Version ‘ -Vin N.C. +Vout No Pin -Vout No Pin +Vin Notes EMC & Safety Safety Approvals 333 200 111 84 67 333 200 111 84 67 333 200 111 84 67 • CE (Meets all applicable directives), UKCA (Meets all applicable legislation) 1. For DIP package, replace suffix ‘S’ with suffix ‘D’. 2. For 3000 VDC isolation, add suffix ‘-H’. 3. Operation at no load will not damage unit but it may not meet all specifications. 4. All dimensions in inches (mm). 5. Pin pitch tolerance: ±0.014 (±0.35) 6. Case tolerance: ±0.02 (±0.5) 7. Weight: 0.005 lbs (2.4 g) 17 Sept 2021