IH0524D

DC-DC 2 Watts IH Series xppower.com Specification • Nominal ±10% • 20mA pk-pk through 12μH inductor, 5Hz to 20 MHz • None • • • • See table None(3) 1.2%/1% Δ Vin ±10% 20-100% load change (3.3 V models ±20%) ±3% 75 mV pk-pk max, 20 MHz bandwidth 0.02%/°C ±220 μF General • • • • • See table 1000 VDC(2) 109 Ω 60 pF typical >1.1 MHrs to MIL-HDBK-217F at 25 °C, GB Environmental Operating Temperature Storage Temperature Case Temperature Cooling SIP or DIP Package • 1.0kV DC Isolation • Optional 3.0kV-6.0kV DC Isolation • MTBF >1.1 MHrs • -40 °C to +85 °C Operation • 3 Year Warranty No Load Input Current 30 30 30 30 30 30 20 20 20 20 20 20 10 10 10 10 10 10 5 VDC 12 VDC Setpoint Accuracy • Ripple & Noise • Temperature Coefficient • Maximum Capacitive • Load Cross Regulation • 3.3 V and 5 V: ±8%, all others: ±5%(4) Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance MTBF • • Capacitor Output Output Voltage Minimum Load Line Regulation Load Regulation Dual Output Unregulated Input Voltage Input Input Voltage Range Input Reflected Ripple Current Input Reverse Voltage Protection Input Filter • 24 VDC -40°C to +85°C -40°C to +125°C 100°C max Convection-cooled ±3.3 V ±5.0 V ±9.0 V ±12.0 V ±15.0 V ±24.0 V ±3.3 V ±5.0 V ±9.0 V ±12.0 V ±15.0 V ±24.0 V ±3.3 V ±5.0 V ±9.0 V ±12.0 V ±15.0 V ±24.0 V ±200 ±200 ±111 ±84 ±66 ±42 ±200 ±200 ±111 ±84 ±66 ±42 ±200 ±200 ±111 ±84 ±66 ±42 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA 65% 72% 77% 78% 80% 80% 67% 75% 77% 82% 82% 82% 68% 75% 80% 82% 82% 82% IH0503S IH0505S IH0509S IH0512S IH0515S IH0524S IH1203S IH1205S IH1209S IH1212S IH1215S IH1224S IH2403S IH2405S IH2409S IH2412S IH2415S IH2424S Mechanical Details 0.40 (10.16) max 0.27 (6.88) 0.01 0.05 (0.25) (1.25) max 0.015 (0.38) 0.10 0.02 (2.54) (0.50) 0.12 (3.05) max SIP Package DIP Package 0.76 (19.5) 0.80 (20.32) max +Vin -Vin 0.28 (7.2) max -Vout 0V +Vout 0.50 (12.7) Safety 0.30 (7.62) -Vin +Vin NC 0.01 (0.25) 0.20 (5.08) 0.10 (2.54) 0.60 (15.24) • CE & UKCA meets all applicable directives 0.01 0.05 (0.25) (1.25) max 0.76 (19.5) max +Vin -Vin 0.09 (2.29) 0.80 (20.32) -Vout 0V +Vout 0.60 (15.24) 0.40 (10.16) +Vout 0V -Vout 0.30 (7.62) 1000 V Versions & legislation. Model Number(1,2) Efficiency 1. For DIP package, replace ‘S’ with ‘D’ in model number. 2. Add suffix ‘H’ to model number for 3000 VDC isolation. For higher VDC isolation, add suffix ‘Hx’ to model number where x=4 for 4000 VDC isolation, x=5 for 5200 VDC isolation and x=6 for 6000 VDC isolation. 3. Operation at no load will not damage unit but it may not meet all specifications. 4. When one output is set to 100% load and the other varies between 25%-100% load. 5. All dimensions in inches (mm). 6. Pin pitch tolerance: ±0.014 (±0.35) 7. Case tolerance: ±0.02 (±0.5) 8. Weight: SIP 0.004 lbs (2.2 g), DIP 0.005 lbs (2.4 g) 0.09 (2.29) Safety Agency Output Current Notes 0.12 (3.05) min • • • • mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA Output Voltage 0.30 (7.62) max 0.30 (7.62) > 3000 V Versions -Vin +Vin NC -Vout 0V +Vout 0.10 (2.54) 0.40 (10.16) 0.01 (0.25) 0.60 (15.24) 24 August 2021