IR0515SA

DC-DC 3 Watts IR Series xppower.com • Single & Dual Output • SIP Package • 1000 VDC Isolation • Optional 3000 VDC Isolation • -40 °C to +85 °C Operation • Semi-regulated • 3 Year Warranty Specification Input Voltage Range Input Reflected Ripple Current Input Reverse Voltage Protection No Load Output Input Voltage Current Input Voltage Input • Nominal ±10% • 20 mA pk-pk, 5 Hz to 20 MHz • None 5 VDC Output Output Voltage • Minimum Load • Line Regulation • Load Regulation • Setpoint Accuracy • Ripple & Noise • Temperature Coefficient • Maximum Capacitive • Load See table None(1) 1.2%/1% Δ Vin See table +2%, -4% 50 mV pk-pk max, 20 MHz bandwidth(2) 0.02%/°C See table 12 VDC General Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance Switching Frequency MTBF • • • • • • See table 1000 VDC minimum, 3000 VDC option(3) 109Ω 60 pF typical Variable, 60 kHz - 85 kHz >1.1 MHrs to MIL-HDBK-217F at 25 °C, GB 5.0 V 600 mA 220 μF 79% 8.0% IR0505SA 70 mA 9.0 V 333 mA 220 μF 84% 7.0% IR0509SA 70 mA 12.0 V 250 mA 100 μF 84% 6.0% IR0512SA 80 mA 15.0 V 200 mA 100 μF 84% 6.0% IR0515SA 80 mA ±5.0 V ±300 mA ±100 μF 82% 7.0% IR0505S 70 mA ±9.0 V ±167 mA ±100 μF 85% 6.0% IR0509S 70 mA ±12.0 V ±125 mA ±47 μF 85% 6.0% IR0512S 70 mA ±15.0 V ±100 mA ±47 μF 86% 5.0% IR0515S 25 mA 5.0 V 600 mA 220 μF 84% 6.0% IR1205SA 25 mA 9.0 V 333 mA 220 μF 87% 4.0% IR1209SA 25 mA 12.0 V 250 mA 100 μF 88% 4.0% IR1212SA 20 mA 15.0 V 200 mA 100 μF 90% 3.0% IR1215SA 25 mA ±5.0 V ±300 mA ±100 μF 85% 5.0% IR1205S 25 mA ±9.0 V ±167 mA ±100 μF 88% 4.0% IR1209S 25 mA ±12.0 V ±125 mA ±47 μF 89% 3.0% IR1212S 20 mA ±15.0 V ±100 mA ±47 μF 90% 3.0% IR1215S Mechanical Details -40 °C to +85 °C -40 °C to +125 °C 100 °C max Convection-cooled 0.39 (10.0) 0.02 (0.50) 0.12 (3.05) 0.10 (2.54) 0.60 (15.24) 0.02 (0.50) Safety Safety Approvals 0.28 (7.20) 0.76 (19.50) 0.37 (9.50) • • • • Model Number 80 mA Environmental Operating Temperature Storage Temperature Case Temperature Cooling Max Output Load Capacitive Efficiency Current Reg. Load • CE & UKCA meets all applicable directives & legislation. 0.28 (7.20) 1 0.05 (1.25) 2 0.02 (0.50) Notes 1. Operation at no load will not damage unit but it may not meet all specifications. 2. Output capacitor of 1 μF required to meet quoted ripple and noise. 3. For optional 3 kV isolation, add suffix ‘-H’ to the model number. 4. All dimensions in inches (mm). 5. Pin pitch tolerance: ±0.014 (±0.35) 6. Case tolerance: ±0.02 (±0.5) 7. Weight: 0.006 lbs (2.8 g) Pin 1 2 4 5 6 7 4 Single +Vin -Vin -Vout N.P +Vout N.P 5 6 7 0.01 (0.25) Pin Connections Dual +Vin -Vin -Vout Common +Vout N.P Single-H +Vin -Vin N.P -Vout N.P +Vout Dual-H +Vin -Vin N.P -Vout Common +Vout 23 Sept 2021