IV1203S

xppower.com • Single & Dual Unregulated Output • SIP or DIP Package • 3.0kV DC Isolation • Optional 4.0kV & 6.0kV DC Isolation • -40°C to +85°C Operation • MTBF >1.1 MHrs • 3 Year Warranty Specification Input Voltage(3) Input Input Voltage Range Input Reflected Ripple Current Input Reverse Voltage Protection Input Filter No Load Input Current Output Voltage Output Current Efficiency Model Number(1,2) 30 mA 3.3 V 300 mA 75% IV0503SA 30 mA 5.0 V 200 mA 78% IV0505SA 30 mA 9.0 V 112 mA 75% IV0509SA 30 mA 12.0 V 84 mA 76% IV0512SA 30 mA 15.0 V 66 mA 76% IV0515SA 30 mA 24.0 V 42 mA 72% IV0524SA 20 mA 3.3 V 300 mA 74% IV1203SA 20 mA 5.0 V 200 mA 74% IV1205SA 20 mA 9.0 V 112 mA 75% IV1209SA 20 mA 12.0 V 84 mA 77% IV1212SA 20 mA 15.0 V 66 mA 78% IV1215SA 20 mA 24.0 V 42 mA 75% IV1224SA 10 mA 3.3 V 300 mA 75% IV2403SA 10 mA 5.0 V 200 mA 77% IV2405SA 10 mA 9.0 V 112 mA 75% IV2409SA 10 mA 12.0 V 84 mA 78% IV2412SA 10 mA 15.0 V 66 mA 78% IV2415SA 10 mA 24.0 V 42 mA 78% IV2424SA • Nominal ±10% • 20mA pk-pk through 12μH 5Hz to 20MHz • None 5 VDC • Capacitor Output Output Voltage Minimum Load Line Regulation Load Regulation • • • • Setpoint Accuracy • Ripple & Noise • Temperature Coefficient • Maximum Capacitive • Load See table None(3) 1.2%/1% Δ Vin ±10% 20-100% load change (3.3 V models ±20%) ±3% 75 mV pk-pk max, 20 MHz bandwidth 0.02%/°C Dual: ±100 μF, Single: 220 μF General Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance Switching Frequency MTBF • • • • • • See table 3000 VDC(4) 109Ω 60 pF typical Variable, 80 KHz typical >1.1 MHrs to MIL-HDBK-217F at 25 °C, GB • • • • -40 °C to +85 °C -40 °C to +125 °C 100 °C max Convection-cooled Environmental Operating Temperature Storage Temperature Case Temperature Cooling 24 VDC Mechanical Details SIP Package Safety Safety Approvals 12 VDC 0.24 (6.0) (5) 0.40 (10.2) 0.37 (9.5) 0.12 (3.0) 0.40 (10.16) -Vin 0.01 (0.2) +Vin -Vin 0.27 (6.9) 0.12 (3.0) 0.02 (0.5) 0.10 (2.5) 0.40 (10.16) Notes 1. For dual output, delete suffix ‘A’, and split current equally between rails. 2. For DIP package, replace ‘S’ in part number with ‘D’. 3. Operation at no load will not damage unit but it may not meet all specifications. 4. For 4000 VDC Isolation, add suffix '-H4'. For 6000 VDC Isolation, add suffix '-H6'. 5. All dimensions in inches (mm). 6. Pin pitch tolerance: ±0.014 (±0.35) 7. Case tolerance: ±0.02 (±0.5) 8. Weight: SIP 0.006 lbs (2.6 g), DIP 0.005 lbs (2.3 g) 0.80 (20.3) 0.76 (19.50) 0.02 (0.5) • UL60950-1 & CAN/CSA C22.2 No. 60950-1 UL62368-1 & CAN/CSA C22.2 No. 62368-1, CE & UKCA meets all applicable directives & legislation. DIP Package -Vout +Vout 0.60 (15.24) Single Output (Bottom View) +Vin 0.01 (0.2) NC -Vout -Vin +Vin -Vin Dual Output (Bottom View) -Vout 0V +Vout 0.60 (15.24) 0.05 (1.2) 0.01 (0.2) 0.30 (7.6) 0.60 (15.24) 0.05 (1.2) 0.01 (0.2) +Vout +Vin NC -Vout 0V +Vout 0.30 (7.6) 0.60 (15.24) 23 Sept 2021 DC-DC 1 Watt IV Series