JCB0312D05

DCDC 3 Watts xppower.com JCB Series • 2:1 Input Range • Operating Temperature 40 °C to +100 °C • Single & Dual Outputs • 1500 VDC Isolation • Optional Isolation to 3000 VDC • Optional Metal Case • 3 Year Warranty Specification Input General • 5 V (4.5-9 VDC) 12 V (9-18 VDC) 24 V (18-36 VDC) 48 V (36-72 VDC) Input Current • See table Input Filter • Pi network Input Reflected Ripple • 35 mA pk-pk through 12 µH inductor Input Surge • 5 V models 15 VDC for 100 ms 12 V models 24 VDC for 100 ms 24 V models 40 VDC for 100 ms 48 V models 80 VDC for 100 ms Undervoltage Lockout • None Reverse Voltage • None Protection Input Voltage Range Output Output Voltage Minimum Load Initial Set Accuracy Line Regulation Load Regulation Cross Regulation Transient Response • • • • • • • Ripple & Noise Short Circuit Protection Overvoltage Protection Overcurrent Protection Maximum Capacitive Load Temperature Coefficient • • • • • See table Minimum load required (see note 1) ±1% max ±0.5% max ±0.5% max ±5% on dual output models (see note 2) 2 MHrs to MIL-HDBK-217F at 25 °C, GB Environmental Operating Temperature • -40 °C to +100 °C, derate from 100% load at +85 °C to no load at +100 °C Case Temperature • +100 °C max Storage Temperature • -40 °C to +125 °C Humidity • Up to 95% RH, non-condensing Cooling • Natural convection EMC & Safety Emissions ESD Immunity EFT/Burst Surge Conducted Immunity Magnetic Fields • EN55022 Class A conducted & radiated, with external components, see application note • EN61000-4-2, level 3, Perf Criteria A • EN61000-4-4, level 3, Perf Criteria A (see note 7) • EN61000-4-5, installation class 3, Perf Criteria A (see note 7) • EN61000-4-6, 10 V rms, Perf Criteria A • EN61000-4-8, 1 A/m, Perf Criteria A Input Voltage Output Voltage 5.0 9.0 12.0 15.0 24.0 ±5.0 ±9.0 ±12.0 ±15.0 ±24.0 5.0 9.0 12.0 15.0 24.0 ±5.0 ±9.0 ±12.0 ±15.0 ±24.0 5.0 9.0 12.0 15.0 24.0 ±5.0 ±9.0 ±12.0 ±15.0 ±24.0 5.0 9.0 12.0 15.0 24.0 ±5.0 ±9.0 ±12.0 ±15.0 ±24.0 4.5-9 V 9-18 V 18-36 V 36-72 V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V 600 333 250 200 125 ±300 ±167 ±125 ±100 ±63 600 333 250 200 125 ±300 ±167 ±125 ±100 ±63 600 333 250 200 125 ±300 ±167 ±125 ±100 ±63 600 333 250 200 125 ±300 ±167 ±125 ±100 ±63 Maximum Capacitive Load Input Current(6) No Load Full Load Output Current mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA 40 mA 40 mA 40 mA 40 mA 40 mA 40 mA 40 mA 40 mA 40 mA 40 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 8 mA 8 mA 8 mA 8 mA 8 mA 8 mA 8 mA 8 mA 8 mA 8 mA 857 833 810 810 857 869 857 833 810 857 328 324 316 316 316 324 320 320 320 320 156 156 152 152 156 160 158 156 156 156 81 80 78 78 78 80 79 78 78 78 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA 2200 470 470 470 220 ±1000 ±220 ±220 ±220 ±100 2200 470 470 470 220 ±1000 ±220 ±220 ±220 ±100 2200 470 470 470 220 ±1000 ±220 ±220 ±220 ±100 2200 470 470 470 220 ±1000 ±220 ±220 ±220 ±100 µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF Efficiency Model Number(3,4,5) 70% 72% 74% 74% 70% 69% 70% 72% 74% 70% 76% 77% 79% 79% 79% 77% 78% 78% 78% 78% 80% 80% 82% 82% 80% 78% 79% 80% 80% 80% 77% 78% 80% 80% 80% 78% 79% 80% 80% 80% JCB0305S05 JCB0305S09 JCB0305S12 JCB0305S15 JCB0305S24 JCB0305D05 JCB0305D09 JCB0305D12 JCB0305D15 JCB0305D24 JCB0312S05 JCB0312S09 JCB0312S12 JCB0312S15 JCB0312S24 JCB0312D05 JCB0312D09 JCB0312D12 JCB0312D15 JCB0312D24 JCB0324S05 JCB0324S09 JCB0324S12 JCB0324S15 JCB0324S24 JCB0324D05 JCB0324D09 JCB0324D12 JCB0324D15 JCB0324D24 JCB0348S05 JCB0348S09 JCB0348S12 JCB0348S15 JCB0348S24 JCB0348D05 JCB0348D09 JCB0348D12 JCB0348D15 JCB0348D24 Notes 1. Minimum load required to meet noise and ripple and initial set accuracy specifications. Below 25% load, noise and ripple increases to 200 mV pk-pk typical and load regulation to ±1% max. 2. Cross regulation is ±5% when one output is at 100% the other is varied between 25% and 100%. 3. For optional 3000 VDC isolation, add suffix ‘-H’ to end of part number. 4. For optional metal case version, add suffix ‘-M’ to end of part number, eg. JCB0324S12-HM 5. For alternative pin out, add suffix ‘-Z’ to end of part number,eg. JCB0324S12-HMZ 6. Input current measured at nominal input voltage 7. A 220 µF/100 V capacitor across the input is required in order to meet EN61000-4-4 & EN61000-4-5. Mechanical Details and Application Notes 0.01 (0.25) 0.90 (22.86) 1 2 PIN CONNECTIONS 1.25 (31.75) 3 9 10 11 12 Bottom View 24 23 22 15.24 (0.60) 0.80 (20.32) 16 15 14 13 0.02 (0.50) 0.10 (2.54) 0.20 (5.08) 0.40 (10.16) Input Filter 0.12 (3.05) Min. +Vin + Model +Vout L C1 - DC/DC Converter -Vin -Vout LOAD JCB0305 JCB0312 JCB0324 JCB0348 C1 220 220 220 220 *or higher for -H µF/100 µF/100 µF/100 µF/100 L V V V V 12 12 12 12 µH µH µH µH C2 Pin Single Dual Single-H 1 2 3 9 10 11 12 13 14 15 16 22 23 24 +Vin N.C. N.C. N.P. -Vout +Vout -Vin -Vin +Vout -Vout N.P. N.C. N.C. +Vin +Vin -Vout Common N.P. Common +Vout -Vin -Vin +Vout Common N.P. Common -Vout +Vin N.P. -Vin -Vin N.P. N.P. N.C. N.P. N.P. +Vout N.P. -Vout +Vin +Vin N.P. N.C. - No Connection Dual-Z, Dual-H Single-Z, or -HZ or -HZ N.P. N.P. N.P. -Vin -Vin -Vin -Vin -Vin -Vin Common N.P. Common N.P. N.P. N.P. -Vout N.C. -Vout N.P. N.P. N.P. N.P. N.P. N.P. +Vout +Vout +Vout N.P. N.P. N.P. Common -Vout Common +Vin +Vin +Vout +Vin +Vin +Vout N.P. N.P. N.P. N.P. - No Pin Notes 470 pF/2 KV/ MLCC* 1. 2. 3. 4. 5. All dimensions are in inches (mm) Weight: 0.04 lbs (20 g) approx. Pin diameter: 0.02±0.002 (0.5±0.05) Pin pitch tolerance: ±0.014 (±0.35) Case tolerance: ±0.02 (±0.5) C2 19-Nov-13 DCDC JCB03 Models and Ratings