JCD0624S05

DC-DC 4-6 Watts xppower.com JCD Series • 2:1 Input Range • Industry Standard Package • 1600 VDC Isolation • Continuous Short Circuit Protection • -40 °C to +100 °C Operating Temperature • Single & Dual Outputs • 3 Year Warranty Specification Input Input Voltage Range Input Current Input Reflected Ripple Current Input Filter Input Surge General • 5 V (4.5-9 VDC) 12 V (9-18 VDC) 24 V (18-36 VDC) 48 V (36-72 VDC) • See table • 35 mA rms through 12 μH inductor Efficiency Isolation Voltage • Pi network • 5 V models 15 VDC for 100 ms 12 V models 24 VDC for 100 ms 24 V models 40 VDC for 100 ms 48 V models 80 VDC for 100 ms Isolation Capacitance MTBF Output Output Voltage Setpoint Accuracy Voltage Balance Minimum Load Line Regulation Load Regulation Cross Regulation Ripple & Noise Start Up Delay Transient Response Isolation Resistance Switching Frequency Power Density • See table • ±1% (±2% for JCD0412/24/48S3V3 & D03 models) • ±1% (±2% D03 models) • No minimum load required • ±0.5% • ±0.5% single outputs, ±1.5% for S3V3 & D03 models • ±5% (see note 1) • 60 mV pk-pk, 20 MHz bandwidth. See note 2 • 20 ms typical for 5 V input models, 500 ms typical for 12/24/48 V input models • 3% max deviation, recovery to within 1% in 250 μs (5% & 300 μS for JCD0412/24/48S3V3 & D03 models) for a 25% load change • 0.02%/°C Temperature Coefficient Overload Protection • 150% of full load on 5 V input models only Short Circuit Protection • Indefinite with auto recovery Maximum Capacitive • See table Load • See table • 1600 VDC Input to Output For optional high isolation versions 3500 VDC Input to Output add suffix -H to model number 1600 VDC Input to Case 1600 VDC Output to Case • 500 pF typical input to output • 109Ω • 266 kHz typical • 4 W: 10 W/in3 , 5 W: 12.5 W/in3, 6 W: 15 W/in3 • >1.1 MHrs to MIL-STD-217F at 25 °C, GB Environmental Operating Temperature Case Temperature Storage Temperature Cooling Operating Humidity • • • • • -40 °C to +100 °C (see derating curve) +100 °C max -55 °C to +125 °C Convection-cooled Up to 95% RH, non-condensing EMC Emissions ESD Immunity Radiated Immunity EFT/Burst Surge Conducted Immunity Magnetic Field • EN55022 Class A conducted with external components, see application note • EN61000-4-2, level 3, Perf Criteria B • EN61000-4-3, 10 V/m, Perf Criteria A • EN61000-4-4, level 3 Perf Criteria B* • EN61000-4-5, level 2, Perf Criteria A* • EN61000-4-6, 10 Vrms, Perf Criteria B* • EN61000-4-8, 1 A/m, Perf Criteria B* Safety Safety Approvals • UL60950-1, CAN/CSA C22.2 No.60950-1, UL62368-1, CE (Meets all applicable directives), UKCA (Meets all applicable legislation) *External input capacitor required, 220 μF/100 V Output Voltage Input Voltage Output Current 3.3 V 5.0 V 12.0 V 15.0 V ±3.3 V ±5.0 V ±12.0 V ±15.0 V 3.3 V 5.0 V 9.0 V 12.0 V 15.0 V 24.0 V ±3.3 V ±5.0 V ±9.0 V ±12.0 V ±15.0 V ±24.0 V 3.3 V 5.0 V 9.0 V 12.0 V 15.0 V 24.0 V ±3.3 V ±5.0 V ±9.0 V ±12.0 V ±15.0 V ±24.0 V 3.3 V 5.0 V 9.0 V 12.0 V 15.0 V 24.0 V ±3.3 V ±5.0 V ±9.0 V ±12.0 V ±15.0 V ±24.0 V 4.5-9 VDC 9-18 VDC 18-36 VDC 36-72 VDC 1200 800 333 266 ±600 ±400 ±166 ±133 1200 800 444 333 266 166 ±600 ±400 ±220 ±166 ±133 ±83 1200 800 444 333 266 166 ±600 ±400 ±220 ±166 ±133 ±83 1200 800 444 333 266 166 ±600 ±400 ±220 ±166 ±133 ±83 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA Input Current(1) No Load 25 mA 25 mA 30 mA 30 mA 25 mA 30 mA 35 mA 40 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 15 mA 15 mA 15 mA 15 mA 15 mA 15 mA 15 mA 15 mA 15 mA 15 mA 15 mA 15 mA Maximum Capacitive Load Full Load 1084 mA 1026 mA 974 mA 973 mA 1042 mA 1012 mA 963 mA 985 mA 445 mA 427 mA 416 mA 406 mA 401 mA 406 mA 438 mA 427 mA 416 mA 427 mA 416 mA 416 mA 216 mA 208 mA 203 mA 198 mA 203 mA 200 mA 216 mA 208 mA 200 mA 200 mA 203 mA 210 mA 108 mA 104 mA 100 mA 99 mA 102 mA 98 mA 109 mA 104 mA 100 mA 100 mA 100 mA 105 mA 3300 1000 220 100 ±680 ±470 ±100 ±47 680 1000 470 100 100 22 ±680 ±470 ±220 ±47 ±150 ±10 1000 1000 470 330 330 1000 ±1000 ±330 ±220 ±68 ±220 ±47 1000 1000 470 330 68 68 ±1000 ±470 ±220 ±220 ±47 ±100 Efficiency Model Number 73% 78% 82% 82% 76% 79% 83% 81% 74% 78% 80% 82% 83% 82% 76% 78% 80% 78% 80% 80% 77% 80% 82% 84% 82% 83% 77% 80% 83% 83% 82% 79% 76% 80% 83% 84% 81% 85% 76% 80% 83% 83% 83% 79% JCD0405S3V3 JCD0405S05 JCD0405S12 JCD0405S15 JCD0405D03 JCD0405D05 JCD0405D12 JCD0405D15 JCD0412S3V3 JCD0412S05 JCD0412S09 JCD0412S12 JCD0412S15 JCD0412S24 JCD0412D03 JCD0412D05 JCD0412D09 JCD0412D12 JCD0412D15 JCD0412D24 JCD0424S3V3 JCD0424S05 JCD0424S09 JCD0424S12 JCD0424S15 JCD0424S24 JCD0424D03 JCD0424D05 JCD0424D09 JCD0424D12 JCD0424D15 JCD0424D24 JCD0448S3V3 JCD0448S05 JCD0448S09 JCD0448S12 JCD0448S15 JCD0448S24 JCD0448D03 JCD0448D05 JCD0448D09 JCD0448D12 JCD0448D15 JCD0448D24 μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF Notes 1. When one output is set at 100% load and the other varies between 25% & 100% load. 2. Measured with 20 MHz bandwidth and 1 μF ceramic capacitor across output rails. 3. Input current specified at nominal 5 V, 12 V, 24 V or 48 V input. 4. For optional 3500 VDC isolation add suffix -H to part number e.g. JCD0424S12-H Mechanical Details DIA 0.02 (0.50) 1.25 (31.75) 0.90 (22.86) 2 3 0.80 (20.32) 9 11 0.60 (15.24) Bottom View 23 22 16 14 0.20 (5.08) 0.10 (2.54) 0.40 (10.40) Pin 2 3 9 11 14 16 22 23 Single -Vin -Vin No Pin N.C. +Vout -Vout +Vin +Vin Dual -Vin -Vin Common -Vout +Vout Common +Vin +Vin Notes 1. All dimensions are in inches (mm) 2. Weight: 0.04 lbs (18 g) approx. 3. Pin diameter: 0.02 ±0.002 (0.5 ±0.005) 4. Pin pitch and length tolerance: ±0.014 (±0.35) 5. Case tolerance: ±0.02 (±0.5) 6. Package: 24 pin DIL nickel-coated copper 0.12 (3.00) Min. Application Notes Derating Curve Input Filter 100 + Load (%) 80 12 µH +Vin +Vout 12, 24 & 48 V input 5 V input 60 220 µF 40 DC/DC Converter 20 0 -40 -20 0 10 20 30 40 50 60 Ambient Temperature (ºC) 70 80 90 100 -Vin -Vout LOAD DC-DC JCD04 Models and Ratings Output Voltage Input Voltage Output Current 3.3 V 5.0 V 12.0 V 15.0 V ±3.3 V ±5.0 V ±12.0 V ±15.0 V 3.3 V 5.0 V 9.0 V 12.0 V 15.0 V 24.0 V ±3.3 V ±5.0 V ±9.0 V ±12.0 V ±15.0 V ±24.0 V 3.3 V 5.0 V 9.0 V 12.0 V 15.0 V 24.0 V ±3.3 V ±5.0 V ±9.0 V ±12.0 V ±15.0 V ±24.0 V 3.3 V 5.0 V 9.0 V 12.0 V 15.0 V 24.0 V ±3.3 V ±5.0 V ±9.0 V ±12.0 V ±15.0 V ±24.0 V 4.5-9 VDC 9-18 VDC 18-36 VDC 36-72 VDC 1300 1000 417 333 ±750 ±500 ±208 ±167 1300 1000 555 417 333 208 ±750 ±500 ±278 ±208 ±167 ±104 1300 1000 555 417 333 208 ±750 ±500 ±278 ±208 ±167 ±104 1300 1000 555 417 333 208 ±750 ±500 ±278 ±208 ±167 ±104 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA Input Current(1) No Load Maximum Capacitive Load Full Load 25 mA 25 mA 30 mA 30 mA 25 mA 30 mA 35 mA 40 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 1159 1298 1220 1218 1302 1265 1217 1221 483 541 520 508 508 508 595 541 527 520 527 514 239 261 254 251 248 248 274 263 251 251 251 254 117 130 124 132 127 122 140 130 127 124 128 128 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA 1000 1000 330 220 ±680 ±330 ±100 ±47 1000 1000 470 330 100 68 ±1000 ±1000 ±330 ±47 ±47 ±10 1000 1000 470 1000 220 1000 ±470 ±680 ±220 ±220 ±22 ±22 1000 1000 100 470 330 220 ±1000 ±470 ±220 ±100 ±220 ±22 Efficiency Model Number(4) 74% 77% 82% 82% 76% 79% 82% 82% 74% 77% 80% 82% 82% 82% 70% 77% 79% 80% 79% 81% 75% 80% 82% 83% 84% 84% 76% 79% 83% 83% 83% 82% 76% 80% 84% 80% 82% 85% 74% 80% 82% 84% 81% 81% JCD0505S3V3 JCD0505S05 JCD0505S12 JCD0505S15 JCD0505D03 JCD0505D05 JCD0505D12 JCD0505D15 JCD0512S3V3 JCD0512S05 JCD0512S09 JCD0512S12 JCD0512S15 JCD0512S24 JCD0512D03 JCD0512D05 JCD0512D09 JCD0512D12 JCD0512D15 JCD0512D24 JCD0524S3V3 JCD0524S05 JCD0524S09 JCD0524S12 JCD0524S15 JCD0524S24 JCD0524D03 JCD0524D05 JCD0524D09 JCD0524D12 JCD0524D15 JCD0524D24 JCD0548S3V3 JCD0548S05 JCD0548S09 JCD0548S12 JCD0548S15 JCD0548S24 JCD0548D03 JCD0548D05 JCD0548D09 JCD0548D12 JCD0548D15 JCD0548D24 μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF Notes 1. When one output is set at 100% load and the other varies between 25% & 100% load. 2. Measured with 20 MHz bandwidth and 1 μF ceramic capacitor across output rails. 3. Input current specified at nominal 5 V, 12 V, 24 V or 48 V input. 4. For optional 3500 VDC isolation add suffix -H to part number e.g. JCD0524S12-H Mechanical Details DIA 0.02 (0.50) 1.25 (31.75) 0.90 (22.86) 2 3 0.80 (20.32) 9 11 0.60 (15.24) Bottom View 23 22 16 14 0.20 (5.08) 0.10 (2.54) 0.40 (10.40) Pin 2 3 9 11 14 16 22 23 Single -Vin -Vin No Pin N.C. +Vout -Vout +Vin +Vin Dual -Vin -Vin Common -Vout +Vout Common +Vin +Vin Notes 1. All dimensions are in inches (mm) 2. Weight: 0.04 lbs (18 g) approx. 3. Pin diameter: 0.02 ±0.002 (0.5 ±0.005) 4. Pin pitch and length tolerance: ±0.014 (±0.35) 5. Case tolerance: ±0.02 (±0.5) 6. Package: 24 pin DIL nickel-coated copper 0.12 (3.00) Min. Application Notes Derating Curve Input Filter 100 + 80 Load (%) DC-DC JCD05 Models and Ratings 12 µH +Vin +Vout 12, 24 & 48 V input 5 V input 60 220 µF 40 DC/DC Converter 20 0 -40 -20 0 10 20 30 40 50 60 Ambient Temperature (ºC) 70 80 90 100 -Vin -Vout LOAD Output Voltage Input Voltage Output Current 3.3 V 5.0 V 12.0 V 15.0 V ±3.3 V ±5.0 V ±12.0 V ±15.0 V 3.3 V 5.0 V 9.0 V 12.0 V 15.0 V 24.0 V ±3.3 V ±5.0 V ±9.0 V ±12.0 V ±15.0 V ±24.0 V 3.3 V 5.0 V 9.0 V 12.0 V 15.0 V 24.0 V ±3.3 V ±5.0 V ±9.0 V ±12.0 V ±15.0 V ±24.0 V 3.3 V 5.0 V 9.0 V 12.0 V 15.0 V 24.0 V ±3.3 V ±5.0 V ±9.0 V ±12.0 V ±15.0 V ±24.0 V 4.5-9 VDC 9-18 VDC 18-36 VDC 36-72 VDC 1400 1200 500 400 ±909 ±600 ±250 ±200 1400 1200 666 500 400 250 ±909 ±600 ±333 ±250 ±200 ±125 1400 1200 666 500 400 250 ±909 ±600 ±333 ±250 ±200 ±125 1400 1200 666 500 400 250 ±909 ±600 ±333 ±250 ±200 ±125 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA Input Current(1) No Load Maximum Capacitive Load Full Load 25 mA 25 mA 25 mA 30 mA 25 mA 25 mA 35 mA 40 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 30 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 12 mA 1232 1558 1445 1445 1578 1500 1428 1428 520 649 632 617 604 617 675 657 617 632 625 625 256 313 301 301 301 294 328 308 301 301 301 304 128 156 148 148 154 147 164 156 150 148 152 150 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA 1000 1000 330 220 ±680 ±330 ±100 ±47 220 1000 680 1000 100 100 ±1000 ±680 ±22 ±330 ±100 ±10 1000 1000 680 1000 100 470 ±1000 ±680 ±220 ±470 ±100 ±100 2200 1000 1000 470 1000 220 ±1000 ±680 ±680 ±330 ±330 ±150 Efficiency Model Number(4) 75% 77% 83% 83% 76% 80% 84% 84% 74% 77% 79% 81% 82% 81% 74% 76% 81% 79% 80% 80% 75% 80% 83% 83% 83% 85% 76% 81% 83% 83% 83% 82% 75% 80% 84% 84% 81% 85% 76% 80% 83% 84% 82% 83% JCD0605S3V3 JCD0605S05 JCD0605S12 JCD0605S15 JCD0605D03 JCD0605D05 JCD0605D12 JCD0605D15 JCD0612S3V3 JCD0612S05 JCD0612S09 JCD0612S12 JCD0612S15 JCD0612S24 JCD0612D03 JCD0612D05 JCD0612D09 JCD0612D12 JCD0612D15 JCD0612D24 JCD0624S3V3 JCD0624S05 JCD0624S09 JCD0624S12 JCD0624S15 JCD0624S24 JCD0624D03 JCD0624D05 JCD0624D09 JCD0624D12 JCD0624D15 JCD0624D24 JCD0648S3V3 JCD0648S05 JCD0648S09 JCD0648S12 JCD0648S15 JCD0648S24 JCD0648D03 JCD0648D05 JCD0648D09 JCD0648D12 JCD0648D15 JCD0648D24 μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF μF Notes 1. When one output is set at 100% load and the other varies between 25% & 100% load. 2. Measured with 20 MHz bandwidth and 1 μF ceramic capacitor across output rails. 3. Input current specified at nominal 5 V, 12 V, 24 V or 48 V input. 4. For optional 3500 VDC isolation add suffix -H to part number e.g. JCD0624S12-H Mechanical Details DIA 0.02 (0.50) 1.25 (31.75) 0.90 (22.86) 2 3 0.80 (20.32) 9 11 0.60 (15.24) Bottom View 23 22 16 14 0.20 (5.08) 0.10 (2.54) 0.40 (10.40) Pin 2 3 9 11 14 16 22 23 Single -Vin -Vin No Pin N.C. +Vout -Vout +Vin +Vin Dual -Vin -Vin Common -Vout +Vout Common +Vin +Vin Notes 1. All dimensions are in inches (mm) 2. Weight: 0.04 lbs (18 g) approx. 3. Pin diameter: 0.02 ±0.002 (0.5 ±0.005) 4. Pin pitch and length tolerance: ±0.014 (±0.35) 5. Case tolerance: ±0.02 (±0.5) 6. Package: 24 pin DIL nickel-coated copper 0.12 (3.00) Min. Application Notes Derating Curve Input Filter 100 + Load (%) 80 12 µH +Vin +Vout 12, 24 & 48 V input 5 V input 60 220 µF 40 DC/DC Converter LOAD 20 0 -40 -20 0 10 20 30 40 50 60 Ambient Temperature (ºC) 70 80 90 -Vin -Vout 100 29 Sept 2021 DC-DC JCD06 Models and Ratings