JCK6048S05

DC-DC 60 Watts xppower.com JCK Series • 2:1 Input Range • Very High Power Density • High Efficiency - Up to 92% • Remote On/Off • 1600 VDC Isolation • OCP, OVP & OTP Functions • 3 Year Warranty Specification Input Input Voltage Range Input Current Input Reflected Ripple Current Undervoltage Lockout Input Surge General • 24 V (18-36 VDC), 48 V (36-75 VDC) • See table • 20 mA pk-pk through 12 μH inductor, 5 Hz to 20 MHz • 24 V models: ON 17.8 V, OFF 16 V typical 48 V models: ON 33.5 V, OFF 30.5 V typical • 24 V models 50 VDC for 100 ms 48 V models 100 VDC for 100 ms Output Output Voltage Output Voltage Trim Minimum Load Line Regulation Load Regulation Setpoint Accuracy Start Up Time Ripple & Noise Transient Response Efficiency Isolation Isolation Capacitance Switching Frequency Power Density MTBF • See table • 1600 VDC Input to Output 1600 VDC Input to Case 1600 VDC Output to Case • 2000 pF typical • 270 kHz typical • 37.5 W/in3 • >110 kHrs min to MIL-HDBK-217F at 25 ˚C, GB Environmental • • • • • • • • See table ±10% No minimum load required ±0.5% max ±0.5% max ±1% 30 ms typical 75 mV for 3V3 +5 V models, 100 mV for other models (see note 2) • 3% max deviation, recovery to within 1% in 3.0) or Open Off = Logic Low (