JCP4024S05

DC-DC 40 Watts JCP Series • • • • • • • 2:1 Input Range Single, Dual & Triple Outputs xppower.com -40 °C to +100 °C Operating Temperature High Efficiency up to 92% Six-sided Metal Case Fixed 350 kHz Switching Frequency Continuous Short Circuit Protection Specification Input Input Voltage Range • 12 VDC (9-18 VDC) 24 VDC (18-36 VDC) 48 VDC (36-75 VDC) • See table • Pi network • Turn on >71% nominal input Turn off 600 kHrs to MIL-STD-217F Input Current Input Filter Undervoltage Lockout Switching Frequency MTBF Environmental Output Output Voltage Output Voltage Trim Minimum Load Line Regulation • • • • See table ±10% See table ±0.5% max for single & dual outputs, ±1.0% max for V1 of triple outputs, ±5.0% for V2 & V3 ±0.5% max single & dual outputs, ±2.0% max for V1 of triple outputs, ±5.0% for V2 & V3 ±1.5% max ±2.0% max 2.5, 3.3 & 5.0 V models 50 mV pk-pk max 12.0 & 15.0 V models 75 mV pk-pk max (20 MHz bandwidth) 5% max deviation, recovery to within 1% in 300 µs for a 25% load change ±0.02%/°C Operating Temperature • -40 °C to +100 °C, derate from 100% load at +60 °C to 0% load at +100 °C Case Temperature Storage Temperature Cooling Operating Humidity Shock Vibration • • • • • +100 °C max -55 °C to +125 °C Convection-cooled Up to 90%, non-condensing 30 g, half sine wave 18 ms pulse applied 3 times on each of 6 axes • 5-500 Hz, 3 g, for 10 mins on each of 3 axes Load Regulation • Setpoint Accuracy Voltage Balance Ripple & Noise • • • EMC Emissions • EN55022 Level A conducted & radiated with external components - contact technical sales • EN61000-4-2, Level 2 Perf Criteria A • EN61000-4-3, 3 V/m Perf Criteria A • EN61000-4-6, 3 V rms Perf Criteria A Transient Response • Temperature • Coefficient Overvoltage Protection • 2.5 V models 3.6 V typical, 3.3 V models 3.9 V typical, 5.0 V models 6.2 V typical, 12.0 V models 15.0 V typical, 15.0 V models 18.0 V typical Overcurrent Protection • 110-140% Short Circuit Protection • Continuous, trip & restart (Hiccup mode) Remote On/Off • ON >3.5 VDC or open circuit OFF 3.5 VDC or open circuit Output Off