JHL0324D12

JHL03 Series DC-DC Converter XP Power 3 Watts xxx Series • International Medical Approvals • 4000 VAC Reinforced Insulation • Meets IEC60601-1, 3rd Edition • 2 MOPP Isolation at 250 VAC • 2 μA Patient Leakage Current • DIP24 Package • EN55011 Level A With No External Components • 3 Year Warranty Dimensions: JHL03: 1.25 x 0.80 x 0.40” (31.15 x 20.32 x 10.20 mm) Models & Ratings Input Voltage Output Voltage 10-17 V 20-30 V Input Current(1) No Load Full Load Output Current Maximum Capacitive Load(2) Efficiency(3) Model Number 5.0 V 600 mA 56 mA 325 mA 720 μF 76% JHL0312S05 12.0 V 250 mA 72 mA 316 mA 300 μF 78% JHL0312S12 15.0 V 200 mA 67 mA 315 mA 240 μF 78% JHL0312S15 ±12.0 V ±125 mA 43 mA 304 mA ±140 μF 81% JHL0312D12 ±15.0 V ±100 mA 56 mA 303 mA ±120 μF 80% JHL0312D15 5.0 V 600 mA 38 mA 167 mA 720 μF 74% JHL0324S05 12.0 V 250 mA 37 mA 165 mA 300 μF 78% JHL0324S12 15.0 V 200 mA 23 mA 146 mA 240 μF 82% JHL0324S15 ±12.0 V ±125 mA 29 mA 150 mA ±140 μF 80% JHL0324D12 ±15.0 V ±100 mA 42 mA 166 mA ±120 μF 80% JHL0324D15 Notes 1. Input current measured at nominal input voltage. 2. Maximum capacitive load is per output. 3. Typical values. Mechanical Details 1.25 (31.75) 14 0.80 (20.32) Pin Connections 0.10 (2.54) 0.20 (5.08) 16 22 23 0.60 (15.24) Bottom View 11 10 0.18 (4.57) 0.40 (10.20) 9 3 2 0.90 (22.86) Notes: 1. Pin diameter: 0.02 ±0.002 (0.5 ±0.05) 2. Pin pitch tolerance: ±0.014 (±0.35) 3. Case Tolerance: ±0.02 (±0.5) 0.12 (3.05) Min. 1 www.xppower.com Pin Single Dual 2 -Vin -Vin 3 -Vin -Vin 9 No Pin Common 10 Trim Trim 11 No Pin -Vout 14 +Vout +Vout 16 -Vout Common 22 +Vin +Vin 23 +Vin +Vin Notes 1. All dimensions are in inches (mm) 2. Weight: 0.04 lbs (20 g) approx. 3. Pin diameter: 0.02 ±0.002 (0.5 ±0.05) 4. Pin pitch tolerance: ±0.014 (±0.35) 5. Case tolerance: ±0.02 (±0.5) JHL03 Series DC-DC Converter XP Power Input Characteristic Input Voltage Range Minimum Maximum Units Notes & Conditions 10 Typical 17 VDC 12 V nominal 20 30 VDC 24 V nominal 25 A 2 μA Input Current See Models and Ratings table Inrush Current Input Filter Patient Leakage Current Undervoltage Lockout At 30 VDC input Pi type On at >9.0 V. Off 17.5 V. Off 10.5 V input. At 10 V input, min temp is -10 °C Non-condensing Natural convection Shock ±3 shocks in each plane, total 18 shocks of 30 g : 11 ms halfsine. Conforms to EN60068-2-27 & EN60068-2-47 Vibration 10-500 Hz at 2 g sweep and endurance at resonance in all 3 planes. Conforms to EN60068-2-6 www.xppower.com 2 JHL03 Series DC-DC Converter XP Power EMC: Emissions Phenomenon Standard Test Level Conducted EN55011 Level A Radiated EN55011 Level A Notes & Conditions EMC: Immunity Phenomenon Standard Test Level Criteria Immunity IEC60601-1-2 Ed 4.0: 2014 As Below ESD Immunity EN61000-4-2 ±8 kv Contact, ±15 kv Air A Radiated Immunity EN61000-4-3 10 V/m A EFT/Burst EN61000-4-4 2 A Surges EN61000-4-5 1 A Conducted Immunity EN61000-4-6 3 Vm A Magnetic Fields EN61000-4-8 30 A/m A Safety Approvals Notes & Conditions 80 MHz - 2.7 GHz plus discrete communication proximity field frequencies ANSI/AMMI ES60601-1 3rd Edition, CSA-22.2 No.60601-1:2008, IEC60601-1 3rd Edition Safety Approvals Safety Agency Safety Standard Notes & Conditions CB Report IEC60601-1 Including Risk Management Medical UL ANSI/AAMI ES60601-1 3rd Ed. & CSA C22.2, No.60601-1:2008 Medical EN EN60601-1 Medical CE Meets all applicable directives UKCA Meets all applicable legislation Application Notes 100 Derating Curve Load (%) 80 60 40 20 0 -20 -10 0 10 20 30 40 50 60 70 80 90 Ambient Temperature (°C) External Output Trim Trim + Vout Trim Up -Vout 3 Trim Down Trim For 5 V output: Trim +10%, R = 3.4 k typical Trim -10%, R = 1.1 k typical For ±12 V output: Trim +10%, R = 12.8 k typical Trim -10%, R = 9.5 k typical For 12 V output: Trim +10%, R = 5.9 k typical Trim -10%, R = 11.3 k typical For ±15 V output: Trim +10%, R = 18 k typical Trim -10%, R = 14.8 k typical For 15 V output: Trim +10%, R = 8.4 k typical Trim -10%, R = 10.4 k typical www.xppower.com 12 Aug 2022