JSK5012S05

JSK50 Series DC-DC Converter XP Power 50 Watts xxx Series • Regulated Single Output • 2:1 Input Range • 2” x 1” Package • 1500 VDC Isolation • Operating Temperature -40 °C to +105 °C • ITE Safety Approvals • Remote On/Off • High Power Density • Optional Heatsink Dimensions: • Six-sided Metal Case JSK50: 2.00 x 1.00 x 0.43” (50.8 x 25.4 x 11.0 mm) • 3 Year Warranty Models & Ratings Input voltage Output voltage Output current 3V3 5V 12 V 15 V 24 V 3V3 5V 12 V 15 V 24 V 3V3 5V 12 V 15 V 24 V 10.00 A 10.00 A 4.17 A 3.33 A 2.08 A 10.00 A 10.00 A 4.17 A 3.33 A 2.08 A 10.00 A 10.00 A 4.17 A 3.33 A 2.08 A 9-18V 18-36V 36-75V Input current(1,2) No load Full load 85 mA 110 mA 160 mA 160 mA 250 mA 50 mA 70 mA 85 mA 85 mA 110 mA 35 mA 45 mA 50 mA 50 mA 60 mA Overvoltage Protection Maximum capacitive load(3) Efficiency Model number(4) 3.9 V 6.2 V 15.0 V 18.0 V 30 V 3.9 V 6.2 V 15.0 V 18.0 V 30 V 3.9 V 6.2 V 15.0 V 18.0 V 30 V 25800 μF 17000 μF 2900 μF 1900 μF 750 μF 25800 μF 17000 μF 2900 μF 1900 μF 750 μF 25800 μF 17000 μF 2900 μF 1900 μF 750 μF 89% 90% 91% 91% 91% 89% 92% 92% 92% 91% 89% 92% 92% 92% 91% JSK5012S3V3 JSK5012S05 JSK5012S12 JSK5012S15 JSK5012S24 JSK5024S3V3 JSK5024S05 JSK5024S12 JSK5024S15 JSK5024S24 JSK5048S3V3 JSK5048S05 JSK5048S12 JSK5048S15 JSK5048S24 3.09 A 4.63 A 4.58 A 4.58 A 4.57 A 1.55 A 2.26 A 2.26 A 2.26 A 2.29 A 0.77 A 1.13 A 1.13 A 1.13 A 1.15 A Notes 1. Input currents measured at nominal input voltage. 2. Input current is typically 2.5 mA at nominal input voltage when output is turned off using remote on/off. 3. Maximum capacitive load is per output. 4. Add suffix “-HK” for optional heatsink. Mechanical Details 0.14 (3.6) 5 6 Pin 1 2 3 4 5 6 1.22 (31.1) Bottom View 0.07 (1.85) Pin Connections 1 0.04 (1.00) 2 2.00 (50.8) 3 0.20 0.20 (5.08)(5.08) 1.80 (45.72) 0.40 (10.16) 4 0.71 max (18.0) max 1.22 (31.0) Max Heat-sink 0.40 (10.16) 0.40 (10.16) 1.00 (25.4) 1 0.10 (2.54) 0.22 (5.5) 0.43 (11.0) Thermal pad Clamp Converter www.xppower.com Single +Vin -Vin Remote On/Off +Vout -Vout Trim Notes 1. All dimensions are in inches (mm) 2. Weight: 0.066 lbs (30.0g) approx. 3. Tolerance: X.XX±0.01 (X.X±0.25) X.XXX±0.005 (X.XX±0.13) 4. Pin Tolerance: ±0.002 (±0.05) JSK50 Series DC-DC Converter XP Power Input Characteristic Input Voltage Range Input Filter Minimum Typical Maximum 9 18 18 36 36 75 Units 12 V nominal VDC 24 V nominal 48 V nominal Internal Pi type 25 Input Surge 12 V models 50 VDC for 1 s 100 Remote On/Off Notes & Conditions 24 V models 48 V models ON: Logic high (3.5-12 V) or open circuit OFF: Logic low (