JTL3048T0515

DC-DC 30 Watts xppower.com JTL Series • 4:1 Input Range • High Power Density • Single, Dual and Triple Outputs • High Efficiency - Up to 91% • Remote On/Off • 1600 VDC Isolation • 3 Year Warranty Specification Input Input Voltage Range Input Current Input Reflected Ripple Input Filter Undervoltage Lockout Input Surge General • • • • • 24 V (9-36 VDC), 48 V (18-75 VDC) See table 20 mA pk-pk through 12 μH inductor Pi network 24 V models: ON 8.6 V, OFF 7.9 V typical 48 V models: ON 17.8 V, OFF 16 V typical • 24 V models 50 VDC for 100 ms 48 V models 100 VDC for 100 ms Output Output Voltage Output Voltage Trim Minimum Load • See table • ±10% on single outputs models only • No minimum load required for single and dual output models, 10% required on all outputs for triple output models Line Regulation • ±0.2% max for single and dual output models, ±1.0% main, ±5% auxiliary for triple output models Load Regulation • Single output models: ±0.5% max Dual output models: ±1% max balanced outputs Triple output models: ±1% max main, ±5% auxiliaries Cross Regulation • ±5% for dual and triples output (see note 2) Setpoint Accuracy • ±1% (±5% for triple auxiliaries) Start Up Time • 30 ms typical Ripple & Noise • 100 mV or 1% pk-pk, whichever is greater single & dual output models, 50/75 mV pk-pk main/auxiliary outputs of triple output models, 20 MHz bandwidth (see note 3) Transient Response • 3% max deviation, recovery to within 1% in 150% of full load Short Circuit Protection • Trip & restart (hiccup mode), auto recovery Overtemperature • 115 °C typical Protection Remote On/Off • On = Logic High (>3.0) or Open Off = Logic Low (