JVA151500S15

JVA15 Series DC-DC Converter XP Power 15 Watts xxx Series • Renewable Energy, Industrial Applications and EV Applications • Ultrawide Input Range - 200-1500 VDC • Fully Encapsulated PCB Mount & DIN Rail Versions • Optional DIN Rail Versions with Built In EMI Filter & 1500 VDC Fuse • -40 °C to +70 °C Operating Temperature • 3 Year Warranty The JVA series offers high isolation DC-DC converters with an ultra wide DC input range. Configuration options provide convenient installation choices. Dimensions: JVA15: 4.92 x 2.95 x 1.57” (124.9 x 74.9 x 40.0 mm) JVA15-D: 5.08 x 4.02 x 1.92” (129.0 x 102.0 x 49.0 mm) JVA15-DF: 5.75 x 5.43 x 2.17” (146.05 x 137.9 x 55.0 mm) Models & Ratings Output Power Input Voltage 10 W 15 W 200-1500 V Output Voltage Overvoltage Output Current Input Current(1) Protection (typical) Typical Efficiency(4) Maximum Capacitive Load Model Number(2,3) 5.0 V 8.0 V 2000 mA 64% 6000 μF JVA151500S05 12.0 V 20.0 V 1250 mA 71% 2000 μF JVA151500S12 15.0 V 20.0 V 1000 mA 72% 1200 μF JVA151500S15 24.0 V 30.0 V 625 mA 74% 470 μF JVA151500S24 120 mA Notes 1. At 200 VDC input 2. For DIN rail mount option, add suffix '-D' e.g. JVA151500S12-D 3. For DIN rail with added EMI filter option, add suffix '-DF' e.g. JVA151500S24-DF 4. At 800 VDC Input Input Characteristic Input Voltage Range Minimum Typical 200 Maximum Units Notes & Conditions 1500 VDC See derating curve Input Current 120/30/16 mA 200 VDC/800 VDC/1500 VDC input Inrush Current 50/150 A 200 VDC/1500 VDC input Input Filter Pi type Undervoltage Lockout On 180-195 V, Off 170-185 V Input Protection External 15 A/1500 VDC required This is already included in the optional -DF version Output Characteristic Minimum Output Voltage 5 Initial Set Accuracy Minimum Load Typical Maximum Units 24 V ±2 0 A 2 s Line Regulation ±1 % Load Regulation ±1 Ripple & Noise 150 % 300 mV pk-pk 320 % Short Circuit Protection 1 No minimum load required 0 - 100% load 20 MHz bandwidth Trip & Restart (hiccup mode), auto recovery 120 Overvoltage Protection Temperature Coefficient See Models and Ratings table % Start Up Delay Overload Protection Notes & Conditions Trip & Restart (hiccup mode) See Models and Ratings table 0.02 %/ ˚C www.xppower.com JVA15 Series DC-DC Converter XP Power General Characteristic Minimum Typical Efficiency Isolation Maximum Notes & Conditions % 4000 See Models and Ratings table VAC Switching Frequency 65 For 60 s kHz 5000 Operating Altitude Mean Time Between Failure Units 72 m 300 Derate from 100% load at 2000 m to 80% load at 5000 m kHrs MIL-HDBK-217F, +25 °C GB 0.9 (400) Weight JVA15 1.01 (460) lb (g) JVA15-D 1.56 (710) JVA15-DF Environmental Characteristic Maximum Units Notes & Conditions Operating Temperature Minimum -40 Typical +70 °C See derating curve Storage Temperature -40 +85 °C Case Temperature Humidity 5 95 °C 95 %RH Non-condensing Cooling Natural convection Shock ±3 shocks in each plane, total 18 shocks of 30 g : 11 ms halfsine. Conforms to EN60068-2-27 & EN60068-2-47 Vibration 10-500 Hz at 2 g sweep and endurance at resonance in all 3 planes. Conforms to EN60068-2-6 EMC: Emissions Phenomenon Standard Test Level Conducted EN55032 Level A Radiated EN55032 Level A Notes & Conditions See application notes. Not required for ‘-DF’ versions EMC: Immunity Phenomenon Standard Immunity EN55035 Test Level Criteria ESD Immunity EN61000-4-2 ±6 kV Contact, ±8 kV Air A Radiated Immunity EN61000-4-3 10 V/m A EFT/Burst EN61000-4-4 3 A Surges EN61000-4-5 3 A Conducted Immunity EN61000-4-6 10 Vrms A Magnetic Fields EN61000-4-8 10 A/m A Notes & Conditions Safety Approvals Safety Agency Safety Standard Notes & Conditions EN EN62109 Photovoltaic Power System UL UL1741/CSA-C22.2 No.107-1 Distributed Energy Resources CE Meets all applicable directives UKCA Meets all applicable legislation www.xppower.com 2 JVA15 Series DC-DC Converter XP Power Application Notes Input Voltage 300-1500 VDC Thermal Derating Curve 100 90 Output Power (%) 80 70 60 JVA151500S05, S12, S15 with input voltage 200-300 VDC 50 40 JVA151500S24 with input voltage 200-300 VDC 0 -40 0 Ambient Temperature (°C) 50 70 100 Input Derating Curve 90 Output Power (%) 80 70 60 50 40 30 20 10 0 200 0 Input Voltage (VDC) 1200 1500 EMI Filter for Conducted Emissions Model L1 Fuse +Input L2 C1 C7 C9 C10 -Input C3 + C4 C2 JVA151500S15 R1 JVA151500S24 R2 + Lo JVA40 + C5 + C6 JVA151500S12 TVS +Vo +Vin + C8 Element Model C7/C8/C9/C10 R3 C3/C4/C5/C6 R4 R1/R2/R3/R4 -Vin -Vo L1 L2 Fuse 3 C1 (μF) JVA151500S05 www.xppower.com 1 C2 (μF) 120 120 120 68 TVS SMBJ7.0A SMBJ20A SMBJ20A SMBJ30A Recommended Value 104K/275 VAC 47 μF/450 VDC 1 MΩ/2 W 330 μH/1 A 7 mH/1 A 3 A UL/CE marked/15 A/1500 VDC JVA15 Series DC-DC Converter XP Power Mechanical Details Standard PCB mount 1.57 (40.0) Front View 0.23 (6.0) 4 ø 0.138 (ø 3.50) 4.92 (125.0) 4.54 (115.5) Third Angle Projection 5 ø 0.067 (ø 1.70) 5 ø 0.047 (ø 1.20) 2.95 (75.0) 2 3 2.57 (65.5) 1 5 4 Bottom View 1.6 (40.6) 0.40 (10.16) 4 1 5 Pin 1 2 3 4 5 Pin Connections Function -Vin +Vin No Connection -Vo +Vo 3 2 4-M3 (0.118) 4.40 (111.76) Note：Grid 2.54*2.54mm Optional DIN rail mount, -D 5.07 (129.0) 9 7 8 Right View Front View 4.01 (102.0) 1 2 3 4 Pin 1 2 3 4 5 6 7 8 9 6 Pin Connections Function +Vo -Vo No Connection No Connection No Connection +Vin +Vin -Vin -Vin 5 LED 1.92 (49.0) Optional DIN rail mount with filter, -DF 5.78 (146.0) LED 9 8 7 6 5 2 x M3 Screws Unscrew two scres to replace the fuse from shell 5.43 (138.0) 2.16 (55.0) Front View 1 2 3 Bottom View Pin 1 2 3 4 5 6 7 8 9 Pin Connections Function -Vin -Vin +Vin +Vin +Vo -Vo No Connection No Connection No Connection 4 Notes 1. All dimensions are in inches (mm) 2. Weight: Standard PCB mount: 0.66 lbs (300 g) approx Optional DIN rail mount, -D: 0.79 lbs (360 g) approx Optional DIN rail mount with filter, -DF: 1.34 lbs (610 g) approx www.xppower.com 06 July 2022