LCS75US12

LCS75 Series 75W AC-DC POWER SUPPLIES CONVECTION COOLED The LCS series of regulated output convection cooled AC-DC power supplies are designed to provide a cost effective solution for industrial electronics, technology and household applications. Features include output voltage adjustment, a power ‘ON’ LED, low stand-by power consumption, output short circuit protection, over current and over voltage protection. Applications include auxiliary power sources, security installations, lighting control, smart home or office control systems, ticketing and vending applications. Features Applications • 75W convection cooled • ITE, industrial and household approvals • Integrated connector cover • Class B conducted & radiated emissions GP • Input voltage range 85-264VAC • 300VAC withstand voltage for 5s • Output voltages from 5V to 48VDC Household Industrial Electronics • Efficiency to 91% Instrumentation GP GP Technology Robotics • Short circuit, overvoltage & overload protection Dimensions • Conformal coating option GP • -30°C to +70°C operating temperature GP 3.89” x 3.82” x 1.18” (99.0 x 97.0 x 30.0 mm) • 3 year warranty Models & Ratings Model Number(3) Output Voltage Nominal Adjustment Range(4) Output Current Ripple & Noise pk to pk(1) Efficiency(2) Maximum Capacitive Load Power LCS75US05 5.0V 4.5 - 5.5V 14.0A 100mV 86% 10000μF 70W LCS75US12 12.0V 10.2 - 13.8V 6.0A 120mV 88% 6000μF 72W LCS75US15 15.0V 13.5 - 18.0V 5.0A 120mV 88% 5000μF 75W LCS75US24 24.0V 21.6 - 28.8V 3.2A 150mV 90% 1500μF 77W LCS75US36 36.0V 32.4 - 39.6V 2.1A 200mV 90% 1000μF 76W LCS75US48 48.0V 43.2 - 52.8V 1.6A 200mV 91% 680μF 77W Notes: 1. Ripple & noise measured with 20MHz bandwidth and 47μF electrolytic capacitor in parallel with 0.1μF ceramic capacitor. 2. Typical efficiencies measured at 230VAC full load. 3. Add suffix -E to model number to specify conformal coating option, MOQ applies, please contact sales. 4. Output power rating must not be exceeded. LCS75 Series AC-DC POWER SUPPLIES Input Characteristic Input Voltage - Operating Input Frequency Surge Withstand Minimum Typical Maximum Units Notes & Conditions 85 115/230 264 VAC Derate output power linearly from 100% at 100VAC to 80% at 85VAC 373 VDC Alternative input. Not to be used in addition to AC input. DC input not included in safety approvals, external DC rated fuse required. Derate output power linearly from 100% at 140VDC to 80% at 120VDC 63 Hz 120 47 50/60 300VAC for maximum 5s 2.0 Input Current - Full Load A 1.0 0.3 No Load Input Power 40 Inrush Current 0.75 Earth Leakage Current 230VAC W A 65 115VAC 115VAC cold start at 25°C ambient 230VAC cold start at 25°C ambient mA 230VAC/50Hz (Typ) Maximum Units Notes & Conditions 48 VDC See Models & Ratings table T3.15A / 250VAC Internal fuse fitted in line Input Protection Output Characteristic Output Voltage Minimum Typical 5 ±2 Initial Set Accuracy Voltage Adjustment Minimum Load % ±1 ±10 % 300 ms 0 A Start Up Delay 8 Hold Up Time ms 55 Full load LCS75US05 All other models No minimum load required 115/230VAC full load 115VAC 230VAC Drift ±0.03 % After 20 minutes warm up, 230VAC, 0°C to 50°C Line Regulation ±0.5 % 100-264VAC, full load % 0-100% load % Recovery within 1% in less than 3ms for a 50-75% and 75-50% load step ±1 Load Regulation ±0.5 10 Transient Response mV pk-pk Ripple & Noise 10 Over/Undershoot 16.2 LCS75US12 33.6 50.0 Temperature Coefficient Short Circuit Protection 110 200 ±0.03 LCS75US15 LCS75US24 Auto recovery LCS75US36 60.0 Overload Protection Full load LCS75US05 VDC All other models See Models and Ratings table 6.3 21.75 Overvoltage Protection % LCS75US05 LCS75US48 % Nominal output current, auto recovery %/°C 5 s Trip and restart, auto recovery 2 LCS75 Series AC-DC POWER SUPPLIES General Characteristic Minimum Typical Maximum 88 Efficiency Units % Isolation: Input to Output 4000 VAC Input to Ground 2000 VAC Output to Ground 1250 VAC 65 Switching Frequency 300 Class I construction W/in3 khrs 0.485 (220) Weight 230VAC Full load (see Models & Ratings table) kHz 2.78 Power Density Mean Time Between Failure Notes & Conditions MIL-HDBK-217F, Notice 2 +25°C GB lb(g) Case Material Aluminium chassis with vented galvanized steel cover Conformal Coating Option Acrylic resin, UL94V-0 rated, certified (UL No. E351072), minimum 30μm coating thickness. Add suffix -E to part number Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions See derating curve Operating Temperature -30 +70 °C Storage Temperature -40 +85 °C 90 %RH 5000 m Natural convection Cooling 5 Humidity Operating Altitude Shock and Vibration Non-condensing Tested according to EN60068-2-27, 10 - 500Hz, 5g (1H) for each X, Y and Z plane EMC: Emissions Phenomenon Standard Test Level Conducted EN55032 Class B Radiated EN55032 Class B EN61000-3-2 Class A Harmonic Current Notes & Conditions EMC: Immunity Phenomenon Standard Test Level Criteria ESD Immunity EN61000-4-2 3 A Contact ±6kV / Air ±8kV Radiated Immunity EN61000-4-3 3 A 10V/m EFT EN61000-4-4 3 A ±2kV Surge EN61000-4-5 Installation class 4 A Line to line ±2kV, line to ground ±4kV Conducted EN61000-4-6 3 A 10Vrms Dip. 100% (0VAC), 10ms Dip. 100% (0VAC), 20ms Dip. 60% (88VAC), 200ms Dip. 30% (154VAC), 500ms Dip. 20% (176VAC), 5000ms A Int. 100% (0VAC), 5000ms B Dips Interrupt EN61000-4-11 Notes & Conditions 0%, 70% 3 LCS75 Series AC-DC POWER SUPPLIES Safety Approvals Safety Agency Standard Notes & Conditions UL UL62368-1 Information Technology TUV EN62368-1, EN60335, EN61558 Information Technology and Household CE Meets all applicable directives UKCA Meets all applicable legislation Application Notes Temperature Derating (See note 1.) (5V) (12V, 15V, 24V, 36V, 48V) 100 90 80 Output power (%) (See note 2.) 70 60 50 40 30 20 -30 -25 -20 -10 0 10 20 30 40 50 60 70 Ambient temperature (°C) Notes: 1. With 230VAC or 140VDC input no derating below -25°C 2. With input at 100VAC or 120VDC derate output power to 75% 4 LCS75 Series LM75-20BXX-C AC-DC POWER SUPPLIES Mechanical Details 3.642 (92.5) 3.346 (85.0) 0.138 (3.5) 0.323 (8.2) Typ. 0.138 (3.5) 1 2 3 4 5 0.374 (9.5) Pitch (Typ.) 0.177 (4.5) Power ‘ON’ LED 0.591 (15.0) 1.024 (26.0) 2 x M3 x 0.5 Thread Max. Penetration = 5mm 0.394 (10.0) 2.913 (74.0) 1.181 (30.0) 0.138 (3.5) 0.138 (3.5) 0.571 (14.5) (3.543) 90.0 0.256 (6.5) 0.256 (6.5) V Out Adj. 3.819 (97.0) 2.165 (55.0) 0.807 (20.5) 2 x 1.791 (45.5) Pin-Out Pin Function 1 AC(L) 2 AC(N) 3 2x M3 x 0.5 Thread Max. Penetration = 3mm 4 -Vo 5 +Vo Connector torque: M3.5, 0.8Nm 3.898 (99.0) Notes: 1. All dimensions are in inches (mm). 2. Tightening torque: M3, 0.4Nm fixings 3. General tolerances: ±0.039 (±1.00) 4. Chassis must be connected to protective earth. 04 August 2021 5